Fedora Installation :: Load Vncserver At Boot Time?

Jun 21, 2009

configured /etc/sysconfig/vncserver, used vncpasswd as the user im trying to log in as to set passwd, disabled firewalls, set chkconfig --add vncserver but still whenever i try to connect to the vnc server I get "unable to connect to host: Connection refused (10061)". If I run the "vncserver" command as my normal user, I can connect fine then. This really wearing on me, any help is greatly appreciated. It is weird if I try to stop vncserver it says [ok] and then if I try to stop again it says [Failed] but if I check the status of vncserver it says Xvnc is running..

View 8 Replies


ADVERTISEMENT

Fedora Servers :: Vncserver Not Starting On Boot

May 21, 2009

I am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is

[Code]....

Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.

View 1 Replies View Related

General :: Error At VNCServer In CentOS VPS - Won't Load Remote Desktop

Jan 24, 2011

I recently bought a VPS with CentOS installed, 512 MB RAM and 80 GB ram, but I have a problem, I want to get VNC Desktop with it but I couldn't.

I installed KDE, GNOME but no one works.

This is my log from vncserver:

Code:

Code:

PC Specs:

OS: CentOS 5.5 32bit
RAM: 512 MB
HDD: 80 GB
Company: VPS-Hosting.ca
100mbps Connection.

View 1 Replies View Related

Ubuntu / Apple :: Cannot Get Wireless Driver To Load At Boot Time

Mar 14, 2010

I followed the instructions that came with the 802 .11 Linux STA driver and was able to initialize my card and connect to a protected network! The instructions also tell me how to load the drivers at boot time, but I get an error when I try to run

Code:

# sh: for i in `find /lib /var -name wl.ko`; do mv $i ${i}.orig; done

The message returned is

Code:

bash: syntax error near unexpected token `do'

Upon restarting, my wireless is no longer active. My card is Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

View 7 Replies View Related

General :: Start X Server And App At Boot (or Services Load) Time

Oct 14, 2009

I need to start an application (graphical) when the PC start, even before anybody login, and use/launch a specific user. Now only can do this manually; when gdm starts, switch to any text tty [ie. Ctrl + Alt + F1], then I login into the special user, start a X server, export the DISPLAY environment variable, and start the application.

With this steps:
Code:
$X :1 -verbose -nr -nolisten tcp &
# Maybe Metacity -> $ metacity
$export DISPLAY=:1
$JavaApp &
Now i need put this steps (script) in some place to launch the app automatically, and with and specific user [ie. manager].

How can I made it? Maybe in init.d? or an special xinitrc? And how can start the app with the specific user? And, if is possible, who can stop the app when the system going turn off? I have Debian 5.0 and a beginner knowledge of shell script.

View 5 Replies View Related

Fedora Installation :: 14 Won't Load And Can't Boot Sda3

Jun 11, 2011

i have installed Fedora 14 on sda3 and it's home partition is on sdb3. So after the installation and went back into ubuntu and did a update-grub. and then restarted i get this screen.

Here is my grub.cfg

Code:

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub

[code]....

View 2 Replies View Related

Fedora Installation :: How And When To Load Kernel Module In Boot Up Process?

Jul 19, 2010

For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.

View 8 Replies View Related

Fedora Installation :: Choose Which Drive To Use At Boot Time?

Jul 9, 2009

I have a drive... let's say SDA1 On that drive I do a F10 install.

Now I remove the drive and put another drive in and did F11 install on another drive in the SDA1 slot.

Now I put the other first drive in.

Now, F10 is on SDA1 and F11 is on SDB1.

What can I add to FSTAB and GRUB.CONF so I can choose which drive I want to use at boot time?

View 14 Replies View Related

Fedora Installation :: F15 Upgrade - Cold Boot Error "Your System Last Boot Fail Or Post Interrupted Please Enter Setup To Load Default And Reboot"

Jun 30, 2011

I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.

View 12 Replies View Related

Fedora Installation :: Dual Boot - Increase Time Interval Of Start Up

Mar 27, 2009

I have installed Fedora10 on my PC which had an XP. Now Fedora waits just 2-3 seconds to press any key to choose between XP and Fedora. Actually if I don't press any key it automatically begins Fedora. How can I increase this time interval?

View 3 Replies View Related

Debian :: Make Vncserver Starts On Boot ?

Feb 25, 2011

Hi all,

how can I make vncserver starts on boot?
Realvnc was installed by "apt-get install vnc-server" command.
There in NO start-stop script in /etc/init.d/ (is it ok? ), so I can't use update-rc.d. When placing
vncserver
or
/bin/bash -c "cd /root/ && vncserver :1" 2> /tmp/vncstart &
in rc.local it starts nothing but "vncpasswd //.vnc/passwd" (and YES, there is password in /root/.vnc/passwd)

Please, help!

View 3 Replies View Related

Fedora :: 11 Boot Time / System Hangs For A Very Long Time On Starting Udev?

Sep 25, 2009

When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.

View 7 Replies View Related

Red Hat / Fedora :: When Try To Access The Web Servers Particular Directory It Take Too Much Time To Load?

Nov 25, 2010

I installed an Apache web server on Fedora 13. My website is built on PHP. When I try to access the web servers particular directory it take too much time to load.I have added index.php in DirectoryIndex statement also in the httpd.conf file. The home page of my sites has 150 kb image file.

View 2 Replies View Related

Fedora Installation :: GRUB Doesn't Load - Make Load Again Upon Booting?

Feb 9, 2009

I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:

[Code]...

What do I need to do to make GRUB load again upon booting?

View 2 Replies View Related

Fedora Installation :: Whenever Load The Url Http://localhost In Mozilla It Shows A Page Load Error?

Aug 8, 2010

I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,

$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful

[code]....

View 3 Replies View Related

Fedora Installation :: Set The Time In The System Tray To The Standard AM/PM Setting Instead Of Military Time?

Jan 29, 2010

Just making one last tweak with my fresh install of F12KDE. I need to . How do I do this

View 2 Replies View Related

Fedora Servers :: Vncserver From Runlevel 3 ?

Jan 8, 2010

I'm running a server that boots into runlevel 3. I can ssh into it but I only get a blank screen when I try to connect to the vncserver that's running on it. Is it possible to connect to a vncserver that's running on runlevel 3 or does X have to be running for the vnc to work?

View 1 Replies View Related

Fedora :: Installing VNCserver Using SSH Connection In F13

Jul 29, 2010

I'm new to Linux. I'm trying to install the VNCserver using SSH connection in a remote pc with Fedora 13. I would like to access the Gnome through remote connection. I did the setup Iptables freeing ports 5901 and 5902. Also set up vncserver and user. The user "aquiles" is a user of the system and also the vncserver. The problem is that I am not able to start the service. I think that seen anything related to Perl. Displays the following error:

[Root @ sinahome ~] # service vncserver start
Starting VNC server: 1: aquiles/usr/bin/env: perl: No such file or directory
[FAILED]
The file /etc/sysconfig/vncservers
Vncservers = "1: aquiles'
VNCSERVERARGS [1] = "-geometry 800x600-depth 16"

[root@sinahome ~] # iptables - list
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT tcp - anywhere anywhere tcp dpt: ftp
ACCEPT tcp - anywhere anywhere tcp dpt: vnc-server
ACCEPT tcp - anywhere anywhere tcp dpt: https
ACCEPT tcp - anywhere anywhere tcp dpt: http
ACCEPT tcp - anywhere anywhere tcp dpt: ssh
ACCEPT all - anywhere anywhere state RELATED, Estaba LISHED
ACCEPT icmp - anywhere anywhere
ACCEPT all - anywhere anywhere
ACCEPT tcp - anywhere anywhere state NEW tcp dpt: s sh
REJECT all - anywhere anywhere reject-with icmp-ho st-Prohibited
ACCEPT all - anywhere anywhere state RELATED, Estaba LISHED
ACCEPT tcp - anywhere anywhere tcp PTPs: commplex-m ain: targus-getdata
ACCEPT tcp - anywhere anywhere state NEW tcp PTPs: 5901:5902

Chain FORWARD (policy ACCEPT)
target prot opt source destination
REJECT all - anywhere anywhere reject-with icmp-ho st-Prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source destination

View 7 Replies View Related

Ubuntu Installation :: Newer Kernel Updates AFTER 2.6.32-17 Has A Randomness At Boot Time Whether The System Will Completely Boot Or Not?

Jul 26, 2010

I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.

For instance just today I downloaded and installed 2.6.32-24

It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.

View 1 Replies View Related

Fedora :: Start Vncserver Service Before User Log In?

Jul 7, 2011

How can I start the vncserver serivce before any uesr log in? because I only have one screen now what I already did is when I log in the vncserver service going to be startup, but I want it can start before I log in. I try the "chkconfig --level 345 vncserver on" but after I reboot, I still cannot access the system before I have a log in action.

View 4 Replies View Related

Red Hat / Fedora :: Using Vncserver To Connect From Windows Desktop

Sep 13, 2010

I'm using vncserver to connect Linux from Windows Desktop. When i open the vncsession cursor is not moving continuously i.e i need to press one by one. I'm using KDE desktop for linux.

know the settings to move cursor continuously when i press/hold the key.

View 1 Replies View Related

Fedora :: Increase The Boot Selection Time In Dual Boot System?

Mar 4, 2010

I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.

[URL]

View 3 Replies View Related

Installation :: Ubuntu Fails To Load Before Installation When Attempting To Duel Boot / Fix It?

Jun 24, 2010

I'm trying to install ubuntu on a laptop (Acer Aspire 6530), and duel boot with windows vista. However, when starting up the computer with the CD in the drive, the installer fails to load, showing only a picture at the bottom of the screen showing a square and a circle with a person in it... This persists for as long as I have cared to wait (hours) and pressing keys at first results in nothing, then after sufficient key presses just produces beeps...

Anyone know what's wrong there?

View 5 Replies View Related

Fedora Servers :: Use XP As VNCViewer And Fedora 10 As VNCServer

Apr 29, 2009

I run into a problem when trying to use my XP as VNCViewer and my Fedora 10 as VNCServer I installed VNC server and client in both my XP and Fedora. If I am using Fedora VncViewer through XP, it runs with no problem. But not the otherway around? (XP vncviewer to FC) Yes..... I know this happens a lot and I can google it, but I googled it with no luck! IP address for my Fedora is 10.0.10.148

I run VncServer in Fedora by typing 'vncserver' or 'vncserver :1', and comes out with the display screen number (1) and the log file. I checked the log file and there are a few errors. (see attached) I run VncViewer from XP, type in 10.0.10.148:1 and still got "Connection refused (10061)' (please see attached again). I attached the startup file as well for you to see. Port 5900 TCP and UDP are open, I can ping from XP to Fedora, I can telnet, but I can't VNC.

View 6 Replies View Related

Red Hat / Fedora :: Remote Desktop - In Services Vncserver Get Message - Unable To Open Display

Jul 22, 2009

Well this is my first time using redhat 7, the install went fine and webserver, mysql, phpmyadmin are all working......great

The only problem i have is the remote desktop

I have set the password in preferences/remote desktop run command vncpasswd and set password

In services vncserver i get this message......... xsetroot: unable to open display '' Xvnc is stopped and vncserver failed. The error was: xsetroot: unable to open display '' Shutting down VNC server: 1:user1[FAILED]

Starting VNC server: 1:user1 [FAILED]

My vncservers file looks like this

I have tried restarting service using root login and user1

View 5 Replies View Related

Fedora :: Get A Daemon To Load On Boot?

Mar 12, 2011

I was trying to get a daemon to load on boot, I stupidly added it to rc.local and it just hangs. I would love to put in a live CD and edit out the line but the volume is encrypted and I cannot get it to mount.

Is there a way I can cancel the daemon from loading or get to the grub menu (not readily visible since I am single boot) and then boot into a console?

View 5 Replies View Related

Ubuntu Installation :: Can't Boot Or Even Load Dell Latitude 10.04

Aug 13, 2010

The disc is fine I have installed using the CD on an Acer Laptop without any trouble what so ever. However now I need to install it on a Dell Latitude D505.It was detected and started the disc and show Ubuntu with the five dots loading screen. And then it goes black, with the laptop on. The menu with options like Install, defect test etc. can't be seen.In response to this I installed it inside Windows and that seemed to be ok, so I restarted the laptop and selected Ubuntu from the boot menu and does the dot loading screen and then black.I have searched Google and it is just threads that end up dead.

View 9 Replies View Related

Ubuntu Installation :: Cannot Find Boot File / Won't Load Anything

Aug 21, 2010

My internal hard drive developed a problem (probably from a fall) and needs to be replaced. In the meantime I've decided to use my external hard drive to hold a version of Linux (ubuntu 10.04) until I am able to replace the internal hard drive. For some reason I am unable to get the external drive to accept the recovery disks I have for Windows 7.

What I'm having issues with is that after installing the Ubuntu OS on to the external, I reboot the PC and it tells me it cannot find a boot file, and won't load anything. I have to run the live cd version of the OS to get anything to work right.

View 9 Replies View Related

Ubuntu Installation :: 10.10 On PS3 No Boot - Install CD Doesn't Load

Oct 14, 2010

has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.

View 5 Replies View Related

Ubuntu Installation :: Dual Boot: Windows7 Will Not Load?

Jun 11, 2011

I have a laptop that has a dual boot of Windows7/Ubuntu10.04. Ubuntu loads fine, but Windows 7 does not. It shows up in the Grub, but it will not load. I assume that the boot loader was messed up somehow, but I am not experienced at deciphering the boot info file. I was hoping someone might be able to take a look at the file and tell me what the issue might be, and also which part of the text indicates the problemBoot File:

Code:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================

[code]...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved