Fedora Servers :: Use XP As VNCViewer And Fedora 10 As VNCServer
Apr 29, 2009
I run into a problem when trying to use my XP as VNCViewer and my Fedora 10 as VNCServer I installed VNC server and client in both my XP and Fedora. If I am using Fedora VncViewer through XP, it runs with no problem. But not the otherway around? (XP vncviewer to FC) Yes..... I know this happens a lot and I can google it, but I googled it with no luck! IP address for my Fedora is 10.0.10.148
I run VncServer in Fedora by typing 'vncserver' or 'vncserver :1', and comes out with the display screen number (1) and the log file. I checked the log file and there are a few errors. (see attached) I run VncViewer from XP, type in 10.0.10.148:1 and still got "Connection refused (10061)' (please see attached again). I attached the startup file as well for you to see. Port 5900 TCP and UDP are open, I can ping from XP to Fedora, I can telnet, but I can't VNC.
View 6 Replies
ADVERTISEMENT
Jan 8, 2010
I'm running a server that boots into runlevel 3. I can ssh into it but I only get a blank screen when I try to connect to the vncserver that's running on it. Is it possible to connect to a vncserver that's running on runlevel 3 or does X have to be running for the vnc to work?
View 1 Replies
View Related
May 21, 2009
I am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is
[Code]....
Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.
View 1 Replies
View Related
Apr 26, 2011
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
View 4 Replies
View Related
Jul 29, 2010
I'm new to Linux. I'm trying to install the VNCserver using SSH connection in a remote pc with Fedora 13. I would like to access the Gnome through remote connection. I did the setup Iptables freeing ports 5901 and 5902. Also set up vncserver and user. The user "aquiles" is a user of the system and also the vncserver. The problem is that I am not able to start the service. I think that seen anything related to Perl. Displays the following error:
[Root @ sinahome ~] # service vncserver start
Starting VNC server: 1: aquiles/usr/bin/env: perl: No such file or directory
[FAILED]
The file /etc/sysconfig/vncservers
Vncservers = "1: aquiles'
VNCSERVERARGS [1] = "-geometry 800x600-depth 16"
[root@sinahome ~] # iptables - list
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT tcp - anywhere anywhere tcp dpt: ftp
ACCEPT tcp - anywhere anywhere tcp dpt: vnc-server
ACCEPT tcp - anywhere anywhere tcp dpt: https
ACCEPT tcp - anywhere anywhere tcp dpt: http
ACCEPT tcp - anywhere anywhere tcp dpt: ssh
ACCEPT all - anywhere anywhere state RELATED, Estaba LISHED
ACCEPT icmp - anywhere anywhere
ACCEPT all - anywhere anywhere
ACCEPT tcp - anywhere anywhere state NEW tcp dpt: s sh
REJECT all - anywhere anywhere reject-with icmp-ho st-Prohibited
ACCEPT all - anywhere anywhere state RELATED, Estaba LISHED
ACCEPT tcp - anywhere anywhere tcp PTPs: commplex-m ain: targus-getdata
ACCEPT tcp - anywhere anywhere state NEW tcp PTPs: 5901:5902
Chain FORWARD (policy ACCEPT)
target prot opt source destination
REJECT all - anywhere anywhere reject-with icmp-ho st-Prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
View 7 Replies
View Related
Jul 7, 2011
How can I start the vncserver serivce before any uesr log in? because I only have one screen now what I already did is when I log in the vncserver service going to be startup, but I want it can start before I log in. I try the "chkconfig --level 345 vncserver on" but after I reboot, I still cannot access the system before I have a log in action.
View 4 Replies
View Related
Sep 13, 2010
I'm using vncserver to connect Linux from Windows Desktop. When i open the vncsession cursor is not moving continuously i.e i need to press one by one. I'm using KDE desktop for linux.
know the settings to move cursor continuously when i press/hold the key.
View 1 Replies
View Related
Jun 21, 2009
configured /etc/sysconfig/vncserver, used vncpasswd as the user im trying to log in as to set passwd, disabled firewalls, set chkconfig --add vncserver but still whenever i try to connect to the vnc server I get "unable to connect to host: Connection refused (10061)". If I run the "vncserver" command as my normal user, I can connect fine then. This really wearing on me, any help is greatly appreciated. It is weird if I try to stop vncserver it says [ok] and then if I try to stop again it says [Failed] but if I check the status of vncserver it says Xvnc is running..
View 8 Replies
View Related
Jul 22, 2009
Well this is my first time using redhat 7, the install went fine and webserver, mysql, phpmyadmin are all working......great
The only problem i have is the remote desktop
I have set the password in preferences/remote desktop run command vncpasswd and set password
In services vncserver i get this message......... xsetroot: unable to open display '' Xvnc is stopped and vncserver failed. The error was: xsetroot: unable to open display '' Shutting down VNC server: 1:user1[FAILED]
Starting VNC server: 1:user1 [FAILED]
My vncservers file looks like this
I have tried restarting service using root login and user1
View 5 Replies
View Related
Apr 13, 2011
I am setting up a server with Ubuntu Server edition. It is has 4gb of ram and had been working great the first week or so but something strange started happening about the same time I installed MythTV. After that, the server would slow down considerably and the ram being used would go from about 400megs up to all of the 4gb and use about 2gb or swap. After much research and investigating, I've narrowed it down to the vncserver starting up all 100 displays/sessions even if I try to specify one with : vncserver :1
View 3 Replies
View Related
Feb 5, 2011
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
View 2 Replies
View Related
Jan 7, 2011
i've tried different vncservers and with all of them, when i use vncviewer, i'm unable to open some applications. for instance, i can open firefox and terminal. but other programs are giving me problems, like google chrome or the disk manager, which will open for a split second and then disappear. i am so mad i've looked all over the place for a couple days and ready to pull my hair out. i've installed vnc4server, tightvncserver, and a couple others i can't think of right now.
View 1 Replies
View Related
May 12, 2011
Just loaded Ubuntu 11.04. Only one of my desktops (graphics cards?) could run Unity. Is it possible to use vncviewer with the Unity desktop? How?
View 1 Replies
View Related
Mar 21, 2011
I use vncviewer (win32) to connect to my SuSE 11.3 box. The SuSE box has the "standard" xinetd started Xvnc server running (includes the -inetd switch).
My client (the vncviewer) has to go through a firewall with limited ports available and so I use the command line:
Code:
However, if there is a problem with the connection, such that the client disconnects, it seems that subsequent request to the Xvnc server create a new session/display. The text in the client window reports "nobody's x11 desktop (host:1)", then "...(host:2)", then "...(host:3)" etc.
I have tried combining the display and the port parameters, like this:
Code:
Can anyone suggest an alternative way of reconnecting to a broken vnc session?
View 1 Replies
View Related
May 9, 2011
I'm using tigthvnc server on linux machine. Often my clients are closing their vncviewrs from close button ('X'), and not exiting gracefully their sessions from OS. How can I terminate the server when they do that?
View 1 Replies
View Related
Apr 27, 2010
I tried to connect to the server with vncviewer Therefor I installed vnc-ltsp-config (repo EPEL) I configured /etc/sysconfig/vncservers
VNCSERVERS="9:roland"
VNCSERVERARGS[9]="-geometry 1600x900 -localhost"
View 1 Replies
View Related
May 16, 2011
I managed to install Centos x86 for the first time, together with VncServer, SSH access, mySQL and Apache. Everything worked greater until I logged in remotely to the server from my Windows 7 machine using RealVnc. I manage to connect successfully and able to use the GUI remotely. However, when I press logout from the menu, the screen gets stuck on the funky blue and white curly background. It does not close automatically.
If I close it using the 'X' button and reconnect, I get in to same stuck screen. My only workaround is to login with Putty and type 'service vncserver restart'. Then I am able to connect again. But same thing happens when I do a logout.
View 2 Replies
View Related
Oct 21, 2010
I've installed TurboVNC and also libjpeg-turbo on Centos 5 to view a Windows computer. I previously have been using TightVNC and it worked great. When I connect to the server using vncviewer, it will only occasionally refresh the image, like when I change a browser window to full screen.
I selected to have a log file and debugging on the server, but I haven't been able to find the file. code...
View 1 Replies
View Related
Aug 8, 2010
I use vncviewer command line to remote access my pc from my notebook.
Is there any option to resize the view like windows client can by percentage?
my notebook screen size is 1280x800, while I use bigger resolution for my pc 1280x1024 if not mistaken.
already look here: http://linux.die.net/man/1/vncviewer but I don't see any option to do that.
View 9 Replies
View Related
Jul 2, 2009
If any of you have successfully created a video hosting server with Fedora, can you give me any ideas of what software to get and how to configure it and so on? Or, if you have been unsuccessful, can you tell me what doen't work?
View 1 Replies
View Related
Mar 5, 2011
i've set a server Fedora 11 using Vsftpd + database berkley + ssl 'certificate) he works perfectly. So i wanted to set a new one on Fedora 14, there is the problem..On my fedora 14, i tryed to use the configuration file that i've made on the F11 but withtout success. It seems that when i activate the SSL option on the server it does not want to start anymore... and i have no errors messages. I notice that when i desactivate the SSL "ssl_enable=NO" my server on F14 can start normaly.
[Code]...
View 1 Replies
View Related
Aug 12, 2010
I am trying to edit my http configuration (menu System -> Administration -> Server Settings -> HTTP) and it seems to be impossible. My Server Name comes up empty and I want to change the default Webmaster email address root@localhost to something else, but I can't change anything. I enter mu new server name and e-mail address, but when I click on the OK button I get a popup box which asks me if I want to save and exit. I click on the Yes button, and the box disappears. HTTP Server configuration does not exit and my changes are not saved.
View 3 Replies
View Related
Nov 13, 2010
I hope this is the right section, it looks like though. I have a small nas ( via artigo a2000 ) with 2 sata hd 1tb each with raid 1 and lvm on top configured and working great.
sda1 and sdb1 ==> md0 raid1 for /boot
sda2 and sdb2 ==> md1 raid1 for swap
sda3 and sdb3 ==> md2 raid1 as physical volume then volume group and lvs on top ( / is a logial volume of these )
I wish to upgrade the current fedora 12 32bit installation I have on it doing a fresh install. But because I have a lot of data on md2 ( 600GB worth ) which I don't want to copy across somewhere else first, I need to know how ( i am pretty sure i can ) to mount md2 during the installation. This way I can use the data I already have on it.
View 3 Replies
View Related
Feb 2, 2009
Im having a hard time trying to change my raid configuration. Here is my situation:
A have two HDs that I configured in instalation time to work as raid squid proxy-cache. they are both 40GB. 40+40=80GB. So, I want to change it to two of 160GB. 160+160=320GB.
I have:
sdc1=40GB
sdd1=40GB
im adding / want:
sda1=160GB
sdb1=160GB
I want to remove the two 40GB and use only the two 160GB for my proxy. The thing is that when I remove the two 40GB, the system crashes at startup telling me that the raid cant be done then file system check fales too. Im wondering if there is a file a have to edit to change to point it to /dev/sda1 intead of /dev/sdc1 for example, so my system would start up looking for sda1(160GB) and sdb1(160GB) intead of sdc1(40GB) and sdd1(40GB).
View 6 Replies
View Related
Jun 7, 2009
I am trying to setup sendmail on a fc10 box with dovecot running imap. I have everything configured and running on the server. For example, when I run "echo 'test' | mail -s test user@mydomain.com" or even to someuser@gmail.com, the mail goes through just fine. I can then reply from both of those accounts back to the server, no problem.
Relaying denied Cannot send mail. The SMTP server does not recognize any of the authentication methods supported by Entourage. Try changing the SMTP authentication options in Account settings or contact your network administrator.
View 10 Replies
View Related
Jan 15, 2009
I have a Fedora 10 box I am using as a web development server. I have most everything working. I am trying to use sendmail as an MTA for sending out emails and I am having problems having the messages delivered. The error always comes up as connection timed out. I have attempted to telnet to many different MX server on port 25 from the Fedora box and each time I try I never get a connection.
This made me think that it might be something with ISP doing port filtering to prevent SPAM or something, however I can telnet to port 25 from different computer on the network. I also have stopped IPTABLES in an effort to try and resolve this issue and am still getting connections timed out.
I have run TCPDUMP while trying to telnet to port 25 to an MX server from the Fedora 10 server and all I see are out bound packets. I also explored the idea that I might of had some kind of weird routing issue on my firewall. I am currently using a Juniper NetScreen 5GT with an ANY/ANY outbound rule. I do not currently have SMTP open on the firewall as I am not planning on accepting mail here.
The best I can figure as telneting to port 25 from windows computers on the same network as the Fedora server works just fine, yet it does not work from the Fedora Server is that it must be some thing on the Fedora box itself, but I have no clue as to what I could be.
View 2 Replies
View Related
Apr 28, 2010
I'm trying to build a Fedora 12 cluster to run DHCP on top of two servers using pacemaker and drbd. The pacemaker runs great but i'm having the hardest time getting DRBD installed.
My kernel version is 2.6.32.11-99.fc12.i686.PAE First i tried to [root@dhcp-primary drbd]#yum install drbd this doesn't give me everything because apparently the kernel module for DRBD must be built from source. so i unpacked drbd-8.3.6.tar.gz and tried :
[Code]...
I'm not very experienced in compiling from source i'd love to make an rpm for this but after scouring the web and trying different install methods, I am still at a loss.
View 2 Replies
View Related
Apr 20, 2011
Being on a low budget and I can't afford to buy Redhat would you recommend using Fedora for setting up dedicated servers? I know Fedora is known to be "bleeding edge" in technology, which concerns me with the stability of the server. Would you recommend a more stable Linux distro? I was also wondering if there is any way to know what these web hosting companies are using in their servers: [url]
View 9 Replies
View Related
Apr 2, 2009
I setup an rsync in cron to sync a master server with a backup server. however not everything gets copied over or removed. I believe this to be a permissions issue on the backup server. I am using a user we created specifically for this, and the rsync is setup to preserve permissions and delete files that have been deleted on the master..
Here is the rsync command:
59 11,23 * * * rsync -avP --delete -e "ssh -pPort" /media/_Files user@ip address:/media >> /home/user/sync.log
Of course the ip address, user and port number is something else then above.. Is there a way to make the user that is initiating the sync into a superuser like root? That way everything on the backup server can be updated as necessary? I don't want to use root, Id like it to be a name I can keep relatively confidential.
View 3 Replies
View Related
Feb 9, 2011
I used the cmd "vncserver" to start a vnc session, and it created a log file like this "/root/.vnc/linux-vzra:2.log". As time going on, the file "/root/.vnc/linux-vzra:2.log" became bigger and bigger, it is too huge indeed. How can I start a vnc session without a log file?
View 1 Replies
View Related
