Fedora Installation :: Configuring Grub To Work With MS Windows 7 And XP?
Mar 18, 2010
I didn't get any responses to my question yesterday about grub with multiple disks
By "best," I don't mean with the most technical detail about each and every option. Instead, I'm looking for a guide that provides a step-by-step instructions about how to do some of the more common tasks, e.g.: configuring grub to work with MS Windows 7 and XP how to reinstall the MBR with grub after MS Windows' install program overwrites the MBR reinstalling the MBR from Fedora's LiveCD (without going through the whole install process) because I can't boot to my hard drive. configuring grub to work with multiple OS on separate hard drives
Again, I'm looking for a guide that starts with the basics about how to create a configuration file and write it to the MBR.
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
First off I would like to install a GUI for samba. After that I want to set up my network so that router stays as the server for the network I have four windows computers already hanging off of the router. This machine which has Slackware on it is hardwired, directly connected, to the router via cat-5 cables. I have samba installed already and I just need to configure it correctly.
When I upgraded my system for the first time, I got a message asking me to decide between a few menu items for configuring grub-pc. When I chose to keep the current version installed, GRUB booted to a CLI. What menu item should I choose?
I'm installing Ubuntu 10.4 DTE on an Acer netbook. The netbook came with Microsoft Windows installed and I'm adding Ubuntu via wubi on a USB thumb drive.
I'm almost done and it is configuring grub-pc. The last line is: Setting up grub-pc (2.98-lubuntu7) ... Then it hangs.
On the web, I find numerous bug reports about my situation, but no work arounds. What do I do?
I wanted to install ubuntu 11.04 alongside win7 on my notebook (with no optical drive). I created 2 primary partitions (one for win7 [ntfs] one for ubuntu [ext4]) and 2 logical partitions (one for swap one for general use for storage[ntfs]) by running ubuntu from my USB Flash disk and using gparted. First, I installed win7 without having any problem, then ubuntu also without having any (apparent) problem (I installed boot loader on MBR: the default setting). After the ubuntu installation is over, I was instructed to restart my computer as usual and win7 started without asking me which OS to boot. When I run ubuntu from my Flash disk and run gparted and selected the boot drive as the partition on which ubuntu was installed, I got the error saying "missing operating system". I suppose GRUB is misconfigured and that is causing the problem because nothing went wrong during the installation processes. How to configure GRUB by running ubuntu from my Flash disk. BTW win7 is working just fine.
I reinstalled windows, which wiped out my boot partition. I then booted to a live CD, to attempt to reinstall GRUB. However the usual method and directions aren't working.
i have to work at my home in my office. For that purpose i use a laptop with Windows (i really don't know why) XP. As i moved to Fedora 10 i want to make the same thing in Fedora.. Really don't know how. i have a cable connection and a router at my home ( i posted another message mentioning the fact of my wireless connection).
At my office i have a router , a firewall and 2 servers that i am allowed to use and i have to work on them (one is an AS/400 from IBM).
This is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
I have windows and I installed fedora 12 on a separate partition.
However, I had a problem with my windows XP SP 3 and had to install windows. Which I did on my C drive. However, when I re-boot I on longer get the GRUB loader displayed so cannot boot into fedora.
I have installed Windows 7 64-bit, Fedora 13 64-bit and Windows XP 32-bit. I had to install the 32-bit XP for some driver issues I have with obscure devices I own. Windows 7 and Fedora both boot with no issues but Windows XP is not the in the GRUB loader as it was installed after Fedora. I have tried adding a few entries to the menu.lst file but my attempts failed. The output of fdisk -l is here
I have a problem that has been vexing me for a week now. I installed Windows XP Media first and then Fedora 12. I did the instalation as simple as I could and let the disk do the work. After installation I rebooted but the windows is not part of the boot up. When I hit the "other" selection a blinking curser shows up and that's it. Now I did goto the Gedit conf. and changed "other" to "Windows" and increased the boot up sec. (hd0,0) is suppose to be for Windows, but no results, (hd2,0) is for Fedora and (hd1,0) is the restore file for Windows. I have tried to see the fdisk, the dev/ directory but don't have a clue how to get there from the terminal.
I have two operating systems on my PC, 1- Fedora 12 2- Windows XP. when I re-install windows xp on PC yesterday, and reboot system, doesn't display grub menu to select a OS!! I tried to repair it with fc12 DVD 32bit, but it doesn't have any option for repairing grub (fc10 DVD had this option!!)
Code:
1. Resure install ... go to shell and type: 2. chroot /mnt/sysimage 3. grub-install /dev/sda 4. exit 5. exit
and it without any error, said successfully done. when I reboot system and choose fedora from grub menu, fedora doesn't start and in black startup screen said:
Code:
SELinus target ... take very times... dependence hard disk speed .... **************************** ****************************
I installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
Currently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
I thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
I'm a newbie to Linux and FC10. I recently installed FC10 on my laptop which has the following config:
AMD64, 1gb DDR2 RAM, 60 GB HDD, DVD Drive and ATI Chipset.
The problem is FC10 locks up randomly and I have seen a couple of threads on this. I want to uninstall FC10. However I'm unable to uninstall / remove the partition. When I try to boot up my laptop using a Windows CD (planning to remove the linux partitions from the WINdows setup) I only see a blank screen, the DVD keeps on spinning but nothing happens. I have tested the windows xp cd on other machines and works fine.
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code: Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
I have 9.10 running with a dual boot with Windows 7 using EasyBCD, I want to upgrade to 10.04 doing a clean install. Problem is, I don't think it will work out using EasyBCD, others are saying in my other thread asking if it works, that I should just let GRUB be my boot manager. Well the problem is, although I have never had one problem with GRUB or GRUB2 in my life, that was on an old Dell Machine running XP, now I have my new laptop and it runs Windows 7, should I continue to use EasyBCD or try GRUB, I don't have one of those Windows 7 Repair CDs, and my recovery is on a partition (factory restore), I get into it by holding "0" when I turn on the computer, if I use GRUB, will I lose that functionality? GRUB2 seems like it would work (When I chose Windows 7 after clicking Ubuntu from the Windows Boot Loader, it starts Windows 7). I am just dead scared and already have the shivers thinking of it.
I burned Fedora onto a disk, but when I turn on the system it just goes straight to the Windows XP login.
I thought it was something wrong with the disk or something like that, but when I pop in the disk on my Dad's laptop, the installation for Fedora runs perfectly.
Also, yes, I checked the order for booting and the CD drive comes before the hard drive.
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
i have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen. Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is: Disk 1: Solid-State: Boot Partition SL6 LVM1: Root Partition Disk 2: Hard Drive: SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root) Disk 3: Hard Drive: Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
