Ubuntu Installation :: Grub Loads Grub Instead Of Windows?
May 24, 2010
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies
ADVERTISEMENT
Aug 9, 2010
The problem is I've set up a dual boot with Xp and Ubuntu 10.04. Ubuntu was working fine till 2 days back but now when I select Ubuntu from the grub screen i get a whole lot of numbers next which it'll say Usb drive or sd card reader etc.. these go by quickly and then the comp stops running. If i press enter on the keyboard I get Initramfs and then i can type but nothing happens even if I type reboot. if I press cntrl+alt+F2 then i get a blank screen with flashing cursor. Same with recovery mode. Windows boots fine. The grub2 screen comes fine. The last thing i did before this happened is reconfigure the grub2 screen, but it seems to be fine (i had added a background img and reordered the boot options) I did not edit grub.cfg. I would prefer not to reinstall it as iv done it a half a dozen times already in the last few weeks..
View 8 Replies
View Related
Jan 21, 2011
Ive installed Ubuntu 10.10 from a SD card (yes my laptop supports booting from SD) and it works fine except the grub does not load. Although I know there are many threads about this Im not sure which one to use because my problem is quite strange.
Im not pretending I understand how grub works but I find it strange:
When I boot from Hard Drive, it boots into Windows without loading grub (I installed ubuntu to an empty partition along the windows on the same drive), however, when I force booting from the SD card, I get the grub window with all the options as expected - ubuntu, mem check, windows 7. Now Im not sure if its grub loading from this SD card (containing ubuntu) or the card somehow runs the grub that is on the hard drive.
My guess is that the partition containg windows (sda0) is flagged as boot and thus the system doesnt even look after grub when booting, however, when theres the SD card it somehow forces booting the ubuntu partition (sda6).
Any idea what I should do? I can boot into Ubuntu, I can access grub etc. I just cant make it load without having the SD card in my PC
View 3 Replies
View Related
May 6, 2010
How do you change the order of the list? I have Xubuntu 9.10 installed on a 5 gig partition. I only use it for Skype as the mic does not work in 10.04 at the moment for me.Anyway, I would like 10.04 to default to the top of the list. How do I change the order when grub loads.
View 4 Replies
View Related
Jan 16, 2011
I'm getting a tad frustrated. Having gone down a dead end on this thread: [URL] I reloaded 10.10, wiping out previous install. Everything was working as it should. I then updated (today, Sept 16, 2011) When rebooted, the system went right to a grub prompt.
View 9 Replies
View Related
Jul 5, 2010
i just installed the Debian on my old laptop. The install went fine but after that, the GRUB menu loads and freezes. I simply can't do anything. I checked menu.lst and the timeout is set to 5 but still nothing happens. It won't load. I then tried to load with the "super GRUB disk"but the same problem - as soon as it loads from the CD, it freezes and I can't do anything. Before I had Xubuntu on the same laptop but there was no Grub menu. It simply loaded. There's only 1 OS on the laptop /currently Debian/ - no windows, no other Linux.
View 14 Replies
View Related
Apr 22, 2010
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
View 9 Replies
View Related
Jan 1, 2010
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
View 2 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
Jun 19, 2010
I was installing fedora 13 just for fun and it move grub boot to different partition. Now I can't boot anything but fedora I know I need to be booting from hd0 sa1 but grub loads from hd0 sa7 .I just need my ubuntu os back .
View 2 Replies
View Related
Oct 12, 2010
I've been using Ubuntu for more than a year (just basic simple stuff like surfing the net or the occasional document) and in the last months I've been running into the following problem.I've been updating regularly to the latest Kernels the last one should be 2.6.32-25. However at start up Grub loads only 2.6.31-19 and below and there's no mentioning of 2.6.32 in grub.cfg while it is present in menu.lst. I tried to update grub with no success.
View 9 Replies
View Related
May 27, 2009
00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)Linux rpmL 2.6.27.24-170.2.68.fc10.86_64 #1 SMP Wed May 20 22:47:23 EDT 2009 x86_64 x86_64 x86_64 GNU/Linuxere my predicamenti got a HP pavilion laptop running that Nvidia graphics card, on that build. So it was a fresh FC10 install, but it would hang up, and only load if i hit the keypad/mouse, which it still does. Eventually it gets to the shell login screen. root login and i then did a yum update, which got me to the current build. that didnt work. NO x window still.
tried startx again, got me an error. found something that said add "vga=ask" to the grub loader, which still loads into shell, but when i do startx, it made me a xorg.conf.new, which i copied into /etc/X11 rebooted and tried again. still have to move the mouse or keypad for the load to start (no idea y) but it loads to shell, and startx works.
View 2 Replies
View Related
Nov 12, 2010
Whenever I power on my Xubuntu machine, GRUB does not load until I reboot. Once the system is running, I can reboot back into Xubuntu but if I power down GRUB does not seem to load. I've got the system to power on at 8am every morning but the fact that I have to reboot it is really annoying me.
Update:
Reinstalled GRUB to the master boot record of my first hard disk and it solved everything. I had to follow the second part of this guide to get it to work:
http://ubuntuforums.org/showthread.php?t=224351
View 2 Replies
View Related
Feb 20, 2011
I've installed Ubuntu inside Windows 7 with the Ubuntu Windows installer. I have previously had problems with booting Ubuntu, but it always got to GRUB at least. Now it shows the Windows bootloader, I select Ubuntu and the computer just reboots.
View 4 Replies
View Related
Dec 20, 2010
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
View 9 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Aug 24, 2010
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
View 4 Replies
View Related
Nov 23, 2010
My problem is that last night, when I was watching some .swf file in firefox, the computer slowed down to the point of my not being able to do anything about it. I shut the computer down and restarted to handle the problem. This worked the first few times, and proceeded to really turn out bad later on.
Now, I have windows and ubuntu on the same hard drive. Whenever I select ubuntu, I get a message saying "GNU GRUB version 1.98-1ubuntu8" and some stuff about how limited Bash-like commands are supported. I can also his tab to do stuff. By using the help command for everything, I have determined that the command "linux" is supposed to load linux and "boot" is supposed to load an OS. Everytime time I pick a command that should load something, it says that I need to load a kernal.
View 9 Replies
View Related
Jan 23, 2011
When I boot my pc it used to take me to a prompt which asked which OS I would like to boot. Today randomly, some grub rescue menu came up. I read online that that meant I had to fix my grub menu, which I did. Now a regular grub menu pops and and I have no idea what to do with it. Whats a grub menu? How can I just get back to my regular boot screen? I run dual boot xp and ubuntu, is grub a program of xp or ubuntu? I have no idea what this grub menu is and whats going on with my pc!
View 2 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Jun 28, 2010
i am newer to linux.i have a doubt in linux boot process in my machine RHEL5 has installed,in bootig GRUB will load in 3 steps
stage 1--> stage1.5 --->stage2
stage1
1st stage1 of grub is located in the 412 bytes of MBR)
also there is a file
/boot/grub/stage1 ( then what is this???)
stage1.5
( where does stage1.5 file located ? i found certain files in /boot/grub/)
like
e2fs_stage1_5
fat_stage1_5
ffs_stage1_5
code....
but my qusetn is GRUB loads from among these files??i removed the above mentioned files from /boot/grub ,but my system is still booting!!!!!!!!!!!!!!!!!!
how it is?then how stage1.5 and stage2 take place??
View 2 Replies
View Related
Jan 2, 2011
I've installed Ubuntu desktop edition 10.04 so far, using alcohol tool as I wanted to install "inside Windows".I successfully installed it everything seems to be fine to me. But, the problem is when I select Ubuntu from boot menu it stops at a console with some grub loader message and doesn't shows login screen.
Please, not that I had installed it a couple of time before and it worked perfectly for some reason and Windows problem I had to uninstall it.
I can also post pictures of that screen if you require, I've to capture it through my mobile phone, which is with suck graphics.
Message:GNU GRUB version 1.98-1ubuntu5
View 4 Replies
View Related
Jan 6, 2010
I would like to know if there is any differences on how to install and to configure GRUB 2 in the different architectures (BIOS/IBM PC-Compatibles, EFI/MacIntel and Corebbot)? Does the Ubuntu installer automatically recognize the different architectures and install the appropriate GRUB 2 package ('grub-pc', 'grub-efi' or 'grub-coreboot' according to the arch)? Or does it just install 'grub-pc'? Is the location of GRUB 2's configuration files different depending on the arch of the computer? Or are they all located in '/boot/grub/', '/etc/grub/default' and '/etc/grub.d/', no matter the arch of the computer? Are the files' structure and options to configure GRUB 2 ('/etc/grub/default' and the scripts in '/etc/grub.d/') different depending on the arch of the computer?
View 3 Replies
View Related
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
