I have windows and I installed fedora 12 on a separate partition.
However, I had a problem with my windows XP SP 3 and had to install windows. Which I did on my C drive. However, when I re-boot I on longer get the GRUB loader displayed so cannot boot into fedora.
Is there anything I can do?
I am pretty new to ubuntu, and not sure if this question has been solved by anyone, I tried search this forum, but didn't find enough information. The closest thread I found here was this one:[URL].. Here is my situation, I have installed Ubuntu 9.04 a few days ago with an old Live CD, after running it pretty well, I upgraded it to 9.10 with the online update tool. (I guess this makes sure I was using Grub 1, the legacy Grub). After updated to 9.10, I installed a Windows XP on my hard drive, obviously, it wiped off my Grub from the MBR. So I tried to restore the Grub back to the MBR, but failed, please see below:I first run the fdisk
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
omitting empty partition (5)
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]...
I recently replaced a failed graphics card w/ a GT 240. Next thing I know, Fedora 11 won't boot up properly. I guess it was a driver issue. I can tell you I went about fixing it all wrong because I wiped the FC11 partition (intending to install FC13) and now I can't boot anything up. My system consists of: sda1 vista, sdb1 XP, sdb5 extended, sdb6 Fedora. I thought grub was on the fedora partition, but reinstalling fedora with grub on that partition didn't fix the boot up problem. Do I need to replace the windows boot loader on sda1 with grub when installing fedora?
View 1 Replies View RelatedI just spend 10 hours tryng to find a way to get my old grub working again after re-installing windows in an emergency, but it is not working...
View 3 Replies View Relatedhow do i correct my boot loader after installing Win7 on the free space available. i still have my fedora 13 partition intact. but of course, fedora option is not available. how do i re-install grub using the rescue dvd? tried alrerady.
View 1 Replies View Relatedsince FC1 i install Fedora on a seperate HD on my PC without installing GRUB. I always made a bootdisk and since FC4 a boot CD with mkbootdisk. If i try to make a bootdisk via mkbootdisk --iso --device/tmp/bootdisk.$(uname -r).iso $(uname -r) under Fedora 12 i get a kernel panic if i try to start from this disc:Kernel panic: not syncing: VFS: Unable to mount root fs on unknown-block(0,0)PID: 1, comm: swapper Not tainted 2.6.31.5-127.fc12.x86_64 #1Call Trace: then there a some hex values and the message that i should choose a proper root partition. if i start with options linux root=correct_bootpartition i get the same kernel panic with the same message.I found out that it must have something to do with the kernel*.img file. In earlier versions the of fedora it has been copied to the iso image. That's not done anymore.Iso size F11: ~ 8.8mb; Iso size F12: ~3.4MB
View 2 Replies View RelatedGot Ubuntu 10.10 amd64 installed.. I've been using Fedora 13 64bit for some time now dual boot with WinXP.. Ubuntu installation to a free Hard drive went well till i rebooted, my Fedora installation was gone , and i thought Ubuntu is much installer friendly than fedora.
View 1 Replies View RelatedThis is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
I have installed Windows 7 64-bit, Fedora 13 64-bit and Windows XP 32-bit. I had to install the 32-bit XP for some driver issues I have with obscure devices I own. Windows 7 and Fedora both boot with no issues but Windows XP is not the in the GRUB loader as it was installed after Fedora. I have tried adding a few entries to the menu.lst file but my attempts failed. The output of fdisk -l is here
Code:
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[code]...
I have a problem that has been vexing me for a week now. I installed Windows XP Media first and then Fedora 12. I did the instalation as simple as I could and let the disk do the work. After installation I rebooted but the windows is not part of the boot up. When I hit the "other" selection a blinking curser shows up and that's it. Now I did goto the Gedit conf. and changed "other" to "Windows" and increased the boot up sec. (hd0,0) is suppose to be for Windows, but no results, (hd2,0) is for Fedora and (hd1,0) is the restore file for Windows. I have tried to see the fdisk, the dev/ directory but don't have a clue how to get there from the terminal.
View 14 Replies View RelatedI have installed Fedora 12 then updated all the packages, after that my windows got crashed so i reinstalled Windows 7 then i lost my grub loader
recover my Fedora 12 with out reinstalling it again
I'm not able to boot into windows XP after having upgraded to Fedora 15 (from a linux magazine DVD). I just get a perennial flashing cursor with black screen. I have tried leaving it like this for a few minutes to see if anything is happening in the background, but to no avail.There were no issues at all with Fedora 14.The grub.conf file appears to have been modified only to pre-pend the fedora 15 boot option. I have changed nothing else in grub.conf or (windows for that matter).All the Fedora boot options work correctly.I have update everything using yum update.Having read a few posts I am still none the wiser. I append the grub.conf and the output of "fdisk -l". What is Fedora 15 version of grub doing differently, and what has it modified that disables the windows part of the bootloader?
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code]...
I have two operating systems on my PC, 1- Fedora 12 2- Windows XP. when I re-install windows xp on PC yesterday, and reboot system, doesn't display grub menu to select a OS!! I tried to repair it with fc12 DVD 32bit, but it doesn't have any option for repairing grub (fc10 DVD had this option!!)
Code:
1. Resure install ...
go to shell and type:
2. chroot /mnt/sysimage
3. grub-install /dev/sda
4. exit
5. exit
and it without any error, said successfully done. when I reboot system and choose fedora from grub menu, fedora doesn't start and in black startup screen said:
Code:
SELinus target ...
take very times... dependence hard disk speed ....
****************************
****************************
what can I do for repairing it?
I didn't get any responses to my question yesterday about grub with multiple disks
By "best," I don't mean with the most technical detail about each and every option. Instead, I'm looking for a guide that provides a step-by-step instructions about how to do some of the more common tasks, e.g.: configuring grub to work with MS Windows 7 and XP how to reinstall the MBR with grub after MS Windows' install program overwrites the MBR reinstalling the MBR from Fedora's LiveCD (without going through the whole install process) because I can't boot to my hard drive. configuring grub to work with multiple OS on separate hard drives
Again, I'm looking for a guide that starts with the basics about how to create a configuration file and write it to the MBR.
I installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
View 7 Replies View RelatedCurrently I installed Windows Starter, then installed Fedora 15 Alpha from the 'Fedora 15 LiveCD'.Now, I have reinstalled Windows Starter and now my grub loader has been removed.How can I get the grub loader back, with just the LiveCD?Is it possible to do this without the LiveCD?
View 2 Replies View RelatedI'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies View RelatedI had setup my system for triple boot with Windows, F10 & Suse. I had the Windows partition and then installed F10 setting up Grub to load the other two. All went fine and was able to choose to boot to Windows which worked. I then installed Suse, choosing the bootloader to be on the partition for Suse. This installed fine and can now choose to boot into Suse which works. F10 still works as expected, but when I choose to boot Windows, I just end up with a Grub command line. I can't see how the Windows partition could have been affected. I can still see all the files in there, but it just wont boot.
[Code]...
This is not really a Linux issue but does anyone know how I can 'repair' this Windows partition without affecting any other partitions. I don't have a Windows install CD. If I boot off FreeDOS, is there a command to repair the 'bootability' of the Windows partition only?
I have installed Windows 7 and fedora 12 on my system.I want to reinstall my windows 7 but as I know after installing windows 7 , i will not be able to boot my fedora 12 how to recover bootloader of fedora 12 after installing windows 7. [URL]
View 1 Replies View RelatedIs it possible to install a different windows manager?Currently I am using a HP Netbook 210. The windows manager I am using is gnome-shell that comes as default with Fedora 15. However, I am wondering if I could completely remove this and install a different windows manager. For example I would like to try the xfce 4.8.
I am not talking about completely removing Fedora 15 and then installing Fedora 15 xfce spin. Just the window manager.How easy would it be to remove gnome-shell windows manager and then install xfce 4.8 windows manager?
I have 2 hard disks. In the first one, I have installed Archlinux, with GRUB. The second one is empty. I have a Windows XP .iso file. Is it possible to install Windows XP in the second hd, without having to burn the ISO file? I don't have got any CD recorder/reader.
View 2 Replies View RelatedI am using windows XP.I wish to install GRUB bootloader so that I can modify menu.lst & add lines to boot from an ext2 partition having iso of linux distro.One way is to use live cd & try 'sudo grub-install <device>' but I don't have live cd.I came to know about open source software 'wingrub' but I am not able to understand how to use it even after reading [URL] what should I do to install GRUB in mbr & have option to boot to c drive which has windows & another partition (/dev/sda2) which has linux.
View 5 Replies View RelatedI thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
View 4 Replies View RelatedAfter installing Fedora 12 from a live CD, I ended up that my Vista completly gone is.
In the grub loader, I cannot see my Vista boot record.
I thought when installing, I choose 'use free space', as there I reservered 7 gigabyte for Fedora.
I can see all the files including my Windows directories and home.
Is there a possibility that I can recover my Vista? and so, make it dual boot?
I have 2 HDDs, and under linux, sda is ntfs, sdb is ext4 of debian jessie, the booting order is sdb ( it contains the grub on sdb's MBR) then sda, the windows boot loader on its own MBR.
The sda was win8, but now just formatted it and did a fresh installation of win10. After power off PC and plug the sdb up again. Turn on the power, setup the booting prior as same as above, but, the grub can not realize the windows 10 boot sector, error message is: no such device /dev/sda1... (and following a digit array) 8xxxxxxxxxxxx....
How to config grub in order to make it can dual boot both Operating System?
I'm thinking about upgrading my Windows Vista to Windows 7. I rarely ever use it but I figured that when I do have to use it I would rather use Windows 7.
Will it mess up Ubuntu or GRUB when I do this? Like GRUB not recognizing Ubuntu any more? I don't really know but I just wanted to ask this here just in case.
I have updated my Windows from Vista to 7. I knew that this would mess up my GRUB so that it wouldn't show on boot. However, it seems as if my GRUB has uninstalled.
I have tried to reinstall it with a Live CD but this didn't work. Maybe I was doing something wrong. I'm sorry if I'm asking a question that has already been posted but I could only find ways to make your GRUB reappear, not reinstall it.
I'm stuck with Windows 7 for a week or two now and I really want to get back to using Ubuntu!
I have my system set up to dual boot Ubuntu 9.10 Karmic Koala and Windows XP Pro, using GRUB 2 (1.97~beta4) as the boot loader. I want to remove Ubuntu and GRUB 2 from the system and install Windows 7 in a dual boot environment with Windows XP. My concern is to be sure that in the process of removing Ubuntu I do not make my system unbootable by removing or otherwise screwing up GRUB without replacing it with the Windows boot loader.
I read a suggestion saying that the most straightforward way to do what I want is to simply install Windows 7 and, during the install process, select my current Ubuntu ext3 partition as the Windows 7 system partition. The suggestion said the Windows 7 install process would overwrite the MBR with the Windows boot loader, effectively uninstalling GRUB 2. The Windows boot loader will find the existing XP installation and give me a choice between Windows 7 and XP at boot time. Does that scenario sound right? Would it work the way I have described it? (I know I would no longer have Ubuntu. That is OK; I intend to reinstall it later.)
For what it is worth, here is my current partition layout:
/dev/hda - 320 GiB internal hard drive
/dev/hda1 - 37.26 GiB ntfs boot (Windows XP)
/dev/hda2 - 18.63 GiB ext3 (Ubuntu 9.10 /root)
/dev/hda3 - 1.69 GiB linux-swap
/dev/hda4 - 240.51 GiB extended
[Code]...
I had to install windows for my sister, and I had a 20gb partition there for backup ( /data/ ), and well, that's where I was going for. After reformatting and installing Windows, I try restoring grub and this is what I get:
Code: grub> root (hd0,5)
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
[code]...
Probing devices to guess BIOS drives. This may take a long time. /dev/hda: Not found or not a block device. Searching for an alternative way to install it, I found that if I 'installed' Ubuntu over my Ubuntu partition, it would automatically restore grub. But when I get to the partition tables, I get a message saying that "The computer has no operating systems on it" and it considers my hard drive as empty.
have an Intel Core2 Duo system that would dual boot via GRUB between Windows Vista and Fedora 10. I recently attempted to upgrade from Vista to Windows 7, however because the version of Vista I had would not upgrade to Windows7. This has removed the ability to boot into my Fedora 10 installation. After some brief research on the Internet, I created a Live CD of Fedora 12, and booted into that. Accessing the terminal I tried typing:
[liveuser@localhost ~]$ su root
[root@localhost liveuser]# grub
Probing devices to guess BIOS drives. This may take a long time.
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
[code]....
Error 15: File not found
What is needed so I can restore GRUB on my system and boot into Fedora again?`
