Ubuntu :: GRUB, Does It Work With Windows 7?
Jun 13, 2010
I have 9.10 running with a dual boot with Windows 7 using EasyBCD, I want to upgrade to 10.04 doing a clean install. Problem is, I don't think it will work out using EasyBCD, others are saying in my other thread asking if it works, that I should just let GRUB be my boot manager. Well the problem is, although I have never had one problem with GRUB or GRUB2 in my life, that was on an old Dell Machine running XP, now I have my new laptop and it runs Windows 7, should I continue to use EasyBCD or try GRUB, I don't have one of those Windows 7 Repair CDs, and my recovery is on a partition (factory restore), I get into it by holding "0" when I turn on the computer, if I use GRUB, will I lose that functionality? GRUB2 seems like it would work (When I chose Windows 7 after clicking Ubuntu from the Windows Boot Loader, it starts Windows 7). I am just dead scared and already have the shivers thinking of it.
View 9 Replies
ADVERTISEMENT
Aug 5, 2011
Ive been running windows 7/Ubuntu dualboot for some years now and never had any problems.Some months ago I got a new Patriot Inferno ssd. Ofc the first thing I did was to installl windows 7, it had no problems, ran fast and smooth. Then when I reinstalled grub I started to get error when trying to start windows, the logo never apeared and all I got was the message "Windows failed to start. A recent hardware or software"Status: 0x00.00F" "Info: The boot selection failed because a required device was inaccessible.". It does not matter what order I install windows and ubuntu in, or how many times Ive tried to reinstall grub. Windows 7 will not work while I have grub/windows installed. Right now Ive got them installed on separate drives, ubuntu on the ssd and windows on a partition on a 1tb hdd. Unfortunately I need to have windows for .net programing and gaming..
[Code]...
View 1 Replies
View Related
Jun 21, 2010
i have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
View 1 Replies
View Related
Mar 18, 2010
I didn't get any responses to my question yesterday about grub with multiple disks
By "best," I don't mean with the most technical detail about each and every option. Instead, I'm looking for a guide that provides a step-by-step instructions about how to do some of the more common tasks, e.g.: configuring grub to work with MS Windows 7 and XP how to reinstall the MBR with grub after MS Windows' install program overwrites the MBR reinstalling the MBR from Fedora's LiveCD (without going through the whole install process) because I can't boot to my hard drive. configuring grub to work with multiple OS on separate hard drives
Again, I'm looking for a guide that starts with the basics about how to create a configuration file and write it to the MBR.
View 2 Replies
View Related
Mar 4, 2011
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
View 9 Replies
View Related
Jun 4, 2011
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
View 8 Replies
View Related
Dec 20, 2010
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
View 9 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Apr 22, 2010
installed windows 7..then tried restoring grub using live cd....mounted partition somewhere else....then installed ubuntu again where it was installed previously and now grub is not detecting windows 7 but i am able use my windows files
used sudo update-grub2.
View 9 Replies
View Related
Aug 24, 2010
I had to dual boot my computer again with windows unfortunately for school. This is something I've dealt with dozens of times in the past but when I try to recover grub 2 with the ubuntu live cd I get this:
sudo grub
sudo: grub: command not found
View 4 Replies
View Related
May 24, 2010
I do not know what to do, i cannot load windows partition. it just loads grub again. this must have been something that happened when i upgraded to the 10.04 or w/e. can someoen help me out with what i can do to stop this or fix it. maybe i can reinstall but i want to know what will work first, i do not have a lot of time to fool with my computer like this again. i spent a week getting ubuntu on my computer the first time so i do not ever want to spend that much time again especially in finals week. !
View 1 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Oct 7, 2010
I am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
View 6 Replies
View Related
Jan 9, 2010
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies
View Related
May 7, 2010
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
View 3 Replies
View Related
Jan 1, 2010
Whenever I select Windows 7 under GRUB, it just hangs at a flashing underscore windows 7 is installed under my first primary partition, what should the GRUB section look like for it? I can't check what mine looked like because this happened:I started up the windows 7 recover (another option under GRUB, on hd(0,3). 7 is on hd(0,1)) and it worked. I decided that i wanted to try something else before i restore my windows 7 partition to its factory state, so i exit the recovery thing. Next thing I know, my Ubuntu partition is completely gone, along with my grub.cfg files -.-
Partitions are like this in this order:
sda1: Windows 7 (can't boot into)
sda8: ubuntu (gets erased)
sda5: partition i'm going to use soon for another distro
[Code]...
oh, and by default, there was like 20 MB of free space in front of my windows partition (idk why asus did that) and when i shrunk my first partition (the windows one) it moved it all to the left -.- do you think something when wrong while doing that?
View 9 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Jun 23, 2010
Ubuntu 10.04 was in small slave-disk, and I put other bigger disk same type IDE/ATA.In first start I get message: "no such device....., grub rescue."Anyway, I make installation in this disk and and now after start message is: "error: out of disk, grub rescue.So now I can not use master/XP and no slave/Ubuntu.
View 3 Replies
View Related
Jul 2, 2011
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
View 9 Replies
View Related
Sep 11, 2010
Is it possible to have the Windows bootloader point to Windows 7 and a Linux partition instead of using GRUB to point to Windows 7 and Linux?
View 2 Replies
View Related
Aug 22, 2010
can windows7 programs properly work on ext3 filesystem in windows (if i use ext2ifs)?
View 2 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
May 16, 2011
When i turn on my laptop the dell logo comes up, and then it goes to the Windows black "grub" (i have ubuntu and 7), if i click on "Windows 7" it starts, but if i click on "Ubuntu 11.04" it goes to the nice and purple grub that we all know, and i also have two options: Ubuntu or windows. It seems stupid and pointless to have 2 grubs.Is there any way to uninstall Window's black grub so the computer will go direct to Ubuntu's purple grub?
View 9 Replies
View Related
Aug 30, 2011
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies
View Related
May 23, 2010
I have a Windows / Ubuntu dual boot system and I recently upgraded my system to 10.04 from the package manager. I ran into what seem to be not an unusual issue with the new version of GRUB2 being installed hosing up the MBR. When I try to boot now I get a message stating: the symbol 'grub_puts_' not found.
There are a few posts and solutions out there about the issue... but the most promising ones, using the Ubuntu 10.04 liveCD don't work for me. The GRUB changes don't seem to stick. It's almost like I'm doing all the grub command line work in a virtual system that gets wiped out as soon as I reboot.
For reference, here is one of the posts I've been working w/, some links in there seemed very promising, but again nothing seem to stick for me from the liveCD:[URL]..Should I be using some rescue disk of some sort? Or is there a way to boot directly to a command line from the Ubuntu CD menu?
View 9 Replies
View Related
Mar 10, 2011
I just downloaded the recent updates and system asked to reboot and went to grub> i do know know what to do.
View 9 Replies
View Related
Apr 7, 2011
After much googling and trial-and-error, I have finally decided to ask about this problem. I have an hp tm2t-1100, a computer that supports efi/uefi booting. However, when I install grub-efi, it installs itself to my hard drive (even though I'm using GPT!) and sets itself up to boot BIOS-mode and then EMULATE EFI. How can I get grub to install to an EFI system partition? I know I need a FAT32 partition named HP_TOOLS and a /boot/efi/ directory on it. I already have those things, but I cannot figure out for the life of me how to get grub-efi to install for a real actual efi-boot instead of what it is doing now (installing like normal grub and emulating efi).
View 4 Replies
View Related
Sep 30, 2010
I have always been a Redhat user, and ESXi User. I decided to try ubuntu because of it's strong recommendations as a file server. I have tried several fixes listed in the forums with no luck. I tried the live CD and I have no issues there. I tried gparted, and it sees all my drives. Seeing that most ask for the boot info script to be run, i was proactive. I know its a boot issue with were grub is pointing too. However, that is where I get stuck. I am not an expert at using grub. In a Nut shell, I had no issues installing. I choose the Jmicron 150G Raid 1 drive. Used full drive space with LVM. When it came to reboot I did, and it just sits after it does the boot from cdrom. I hate to go back to windows 7 for a file server/web server. Oh Windows was installed at one point, I think that is where the script sees the GPT partitions.
Machine details:
AMD 1055T
8G Gskill
4850 ATI card
Intel Pro 10/100/1000 PT
[Code]....
View 9 Replies
View Related
Jan 2, 2011
After windows 7 failed to install and decided to take my partitions with it I managed to restore them from liveCD.I now can't get grub to work properly. I finally got it to find boot into one of the my two OS', but then borked grub it again when trying to update-grub2.Output from bootinfoscript attached.
View 9 Replies
View Related
Mar 5, 2011
Today when working with Windows 7 Disk Management, I carelessly mark the partition on which Win 7 is installed as ACTIVE and the chain of problems began. When I restarted my laptop, something like this appeared:
Code:
No such partition.
Grub rescue>_
[code]....
View 2 Replies
View Related
