Fedora :: FC11 Boot Hangs On 'starting Atd'

Aug 17, 2009

Running kernel-PAE-

Boot hangs on 'starting atd'

Select 217.2.3 and it boots OK.

View 11 Replies


Fedora Installation :: Fc11 First Boot Hangs On "Verifying DMI Pool Data"

Oct 18, 2009

I had Fedora11 (default layout) running on a separate hard drive (winXP on the other drive). After the FC drive failure I replaced the drive and did a fresh install again. This time I tried a custom layout to keep the /home on a separate partition. The installation went without a hitch, but on first boot the system hangs with "Verifying DMI Pool Data......"

XP boots fine though. Looks like grub doesn't get loaded. I can boot with the installation cd and get into recovery mode, everything seems fine on the fedora disk. Fdisk result:


View 2 Replies View Related

Fedora Servers :: High CPU Usage When Starting Services On FC11?

May 9, 2010

so my server is doing fine, but there is one odd thing I would like to fix. When I start and stop services, the CPU is maxed out for about five seconds each time. The services start the same speed, but it still does this. Small things like lm_sensors don't do this, just things like httpd and sendmail. THis server was upgraded to Fedora 11 with a netinstall CD a few months ago.

View 4 Replies View Related

Fedora Installation :: Fc11 Install Hangs At Checking Dependencies / Fix It?

Jun 11, 2009

I am trying to install fc11 on an intel mb with pentium4 and ati graphics
the install always hangs at the point where the sw packages have been selected
and the install is checking dependencies.

I have tried the regular install
the basic video install, and text install
with the same symptoms each time

the dvd drive lite is on and the hard disk activity lite is on and the system is frozen.
have to power off.

I have fc11 installed on another system (amd) and had install issues also but that was
with the preview.

View 1 Replies View Related

Fedora :: 11 Boot Time / System Hangs For A Very Long Time On Starting Udev?

Sep 25, 2009

When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.

View 7 Replies View Related

Fedora Installation :: Upgraded To FC11 From FC10 / System Freezes / Hangs

Jun 24, 2009

I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.

Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).

View 14 Replies View Related

Fedora Installation :: Fc11 Install Hangs After Remounting Root Fs In R/w Mode

Jul 8, 2009

I have a Dell Optiplex 760 Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz


I tried to upgrade to FC11 via download and DVD and in both cases the install hangs on bootstrap right after remounting the root filesystem in read/write mode.

Since it hangs in this manner, I have not been able to gather any logs...

View 5 Replies View Related

Ubuntu :: 9.10 64bit Won't Boot - Hangs At 'Starting Up...'

Feb 9, 2010

I don't exactly when this started, but I hadn't booted my mythbuntu box for a while. When I boot it now, it hangs after grub at 'Starting Up...'. I was running 9.10 64bit, with 4GB Ram installed on an AMD64 3700+ ASUS A8N5X mobo. How can I resolve this? Can I modify boot options by hitting the Esc key before grub? What options should I use? I made no changes myself, it just happened on the next reboot. I hope that I won't have to burn a livecd. I only say that because the only machine that I have with a decent burner is my 9.10 box.

View 6 Replies View Related

Ubuntu Installation :: Dual Boot Upgrade Hangs On Install Restart At Starting Up

Jun 5, 2010

I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:

Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)

If I select the top one, I get:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.

View 9 Replies View Related

Red Hat / Fedora :: FC13 Hangs On Starting Atd?

Nov 4, 2010

I did a fresh FC13 install on a computer and after trying to install the nvidia drivers the machine hangs on starting atd when it boots.Initially, I tried to install the nvidia drivers with yum but it didn't work. The nvidia module was not loading and although I blakclisted the nouveua driver the machine was still picking it up. Anyway after spending a lot of time trying to find a solution online, I decided to download the drivers from nvidia and install it myself.So I did that, run sh <nvidia-package>.run and the installation was completed without any complaints. Since then the machine hangs when I booted it up. Also I don't see any errors in var/log/messages or in /Xorg.0.logHere is my grub.conf:

Code: default=0


View 2 Replies View Related

Fedora :: System Hangs At Starting ATI External Events Daemon

Sep 15, 2010

I've followed this guide [URL] after rebooting the system hang at:
starting ati external events daemon [OK]
This line start blinking for a while, then nothing happen. I am using a radeon hd 4225. (I'm booting with acpi=off).

View 3 Replies View Related

CentOS 5 :: System Hangs During Boot - "Starting Xend:"

Nov 29, 2009

I am booting centos 5.3 on x86-64 machine. The system hands at line "Starting xend:". Is there any way to skip starting xend service during boot or disable it during boot so the system finally reboots.

View 3 Replies View Related

Fedora :: Cannot Boot Into

Sep 9, 2009

I was on version and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal

ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = is needed by kmod-nvidia-


View 1 Replies View Related

Fedora Hardware :: Toshiba Tecra M11 - Overheat - Hear Fan Starting To Run At Full Speed Then Computer Hangs

Jan 3, 2011

I installed on this laptop two OS : Windows XP SP3 with drivers for M11 from Toshiba download site Fedora 14 64 bits I have no problem running Windows but sometimes when I run Fedora I hear fan starting to run at full speed then computer hangs. When this occurs, I must power off it using switch then reboot and I lost my work. I try to run Memtest86 during a full night and I did not get any error or hang.

Is there somebody who already installed Fedora 14 on Toshiba Tecra M11? kernel is and my graphic card worked fine with hardware acceleration out of the box.


View 4 Replies View Related

Fedora Installation :: Can't Boot After Fc11 Livecd Install?

Sep 30, 2009

I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i

View 4 Replies View Related

Fedora X86/64bit :: After Udate A Does Not Boot?

Dec 3, 2009

I have installed last updates about 3 days ago. After this Fedora kernel does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version

View 2 Replies View Related

Fedora :: FC11 - Preupgrade - FC14 - Boot - 200MB

Jan 14, 2011

I'm planing to upgrade from FC11 to FC14 using a preupgrade. I've read about some ways to overcome the problem of my /boot partition being only 200MB in size while the newer versions require 500MB. The option of "filling the free space on the boot partition to be less than 100MB to cause preupgrade to download the loader" appeals to me. But what I don't understand is: is the 500MB requirement of the new versions is transient during the install or a permanent requirement? If I do this trick of first filling up the free space on /boot then freeing it up before the reboot, what will be the permanent disk space requirement of FC14?

Are there any safe (and prefarably simple) ways to increase the size of the /boot partition after decreasing the size of other partition? Here is the output of "df" relevant to the /dev/sda disk:


View 9 Replies View Related

Fedora Installation :: Boot Disk Failure On FC11 Upgrade?

Jun 11, 2009

I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.

View 14 Replies View Related

Fedora Security :: FC11, SELinux, And Initrd No-boot Scenario And Resolution?

Jul 16, 2009

So, I had fun with this one the past week. I had an FC11 system running just fine. Then one day it would not boot - it was hung somewhere inside the init script of the initrd image. CTRL-ALT-DEL would reboot the system. Using grub editor, I could temporarily delete the initrd line and boot into the system OK. But what was going on?

mkinitrd was of no help to me. I even did a yum update, which got a new kernel, which also generated a new initrd - no joy. I extracted the initrd file system and edited the init script. I eventually hit on this tidbit: If I commented out this line:

daemonize --ignore-missing /bin/plymouthd and rebuild the initrd image - the system would finally at least tell me what the problem was: mount failed for selinuxfs on /selinux. No such file or directory.

So, I examine the root (the real root, not the initrd temporary root) - and sure enough, no /selinux. I make one and reboot. The system goes into a "targeted policy relabel" operation, reboots, and I am back in business - even with my original, unmodified, initrd.

I have no idea what happened to my /selinux directory, but I think the initrd "init" script needs to check for this directory's existance, and make it if necessary. Or at least report that it isn't there. In FC11 right now the system just HANGS without this directory being present, without any clue as to what the problem is!

View 1 Replies View Related

Fedora Installation :: FC11 X64 Dell T5400 Dual Nvidia Quadro FX 1700 Fails To Graphically Boot

Sep 4, 2009

I'm running into this issue after installing Fedora Core 11 off DVD. Anaconda install the first part of the installation, then after reboot it goes into run level 3 (I think, where you have to login as root) I noticed that it said xserver failed to load before it actually boots Anaconda.

Maybe I should pull a graphic's card? I have logged in as root after the base install and did a lspci, and you can see the two Nvidia Quadro FX1700's and you can tell it is an intel board with the Intel Corp 6311ESB/6321ESB PCI Express ports. Also you can navigate through the linux directories via ls \. I tried YUM to find/install the graphics drivers but it says something about metadata not being configured. I checked the IP address with ifconfig and had to manually assign an ip.

View 14 Replies View Related

OpenSUSE Install :: 11.1 - Installation Hangs On Starting UDev

Dec 21, 2008

I want to try the new 11.1. When I start the installation (x86_64 DVD), the startup is hanging. The last message is "Starting udev...". Keyboard is completely frozen, only reset button is working. Mobo is an Intel DG965WH with 4GB RAM and ATI Graphic card (ASUS1950pro). My opensuse 11.0 runs without any problems.

View 9 Replies View Related

OpenSUSE Install :: Hangs Up When Starting Sound Card?

Jul 25, 2010

I'm trying to install OpenSuse 11.3, everything went fine untill last step : configuring hardware. So my install hangs up at the point "starting sound card" (well it is in french, but it should be this translation in english). My sound card is a classical realtek hd audio card (from a laptop toshiba x200). In the terminal(/dev/tty1) I can see that it is hanging at Starting Yast2. I had no pb with my previous installs regarding the sound card (with openSuse 11.2 and earlier). what to do to have this step working, or at least have the sound card not started at this point.

View 1 Replies View Related

Ubuntu Installation :: 11.04 Natty Hangs While Starting Services?

Jun 15, 2011

I'm trying to install 11.04 natty on an HP Probook 6455b and failing.

Using two different burned cds I'm able to start the install process

1) I can get to the initial menu and interact with it to change command line options

2) I can boot the kernel and see services trying to start

At some point the system hangs and I suspect because upstart is starting services in parallel the console messages aren't showing the same consistent point for the hang.

with my last run using --verbose on the command line the last few lines are:

* Starting bluetooth
* Starting configure network device security
* Starting configure network device
* PulseAudio configured for per-user sessions
saned disabled; edit /etc/default/saned

Another run I just did (with network cable unplugged) ended with the same but also

* Stopping save kernel messages

I should note that the Pulseaudio line's asterisk is red or orange, does that indicate anything?

Mostly I'm looking for suggestions on how I can further debug and diagnose this problem to resolve it.

The system previously ran 10.10 fine and runs Fedora 15 (which should have a very similar kernel level) with no apparent problems.

Probook 6455 = basic HP laptop with AMD Phenom II mobile processor, 6G of RAM, ATI 4200 embedded graphics, etc, etc. Nothing special really.

View 1 Replies View Related

Server :: Hangs At Starting Domino Services During Booting Up?

Feb 11, 2010

I joined a company as an IT staff 2 months plus back. I now encounters a problem that the booting up hangs at the time when it is starting domino services. I have no clue where to look at and duno where to start checking. A little description of the server. : It's a lotus notes domino server for employees webmail service. -> Now it is down. it's an external dns server: recently high volumes of query cache denied surfaces. it's also our proxy server. The only way to get it up and running is to turn off domino service. The system is running still with high volumes of queries I last checked.

Althrough it can boot up now and DNS & proxy are running, I couldn't access the system anymore. It will hang when I attempt to log in from the command prompt. Below is an illustration:

iasaix login: root -> I attempt to log in using root user
password: xxxxxxxx -> I keyed in my password
-> The cursor comes down and just keeps blinking and nothing happens.

Remote access is not possible as it has sshd disabled by default. Our employees cannot access their webmail now, which is a major issue.

View 1 Replies View Related

Fedora :: F10 Hangs On Boot?

Sep 29, 2009

I have been using F10 since its release and have not had any trouble until now. During my last session, I ran an update. Today when I boot my desktop (single boot btw), it hangs just after the boot loader. The only sort of warning is:

eth0: link up, 100Mbps, full-duplex, 1pa 0x45E1

I have browsed the forums to no avail. Other have the same issue, but with no posted solution. I have tried disabling NetworkManager, but I think it may be the service that runs after NetworkManager.

View 2 Replies View Related

Fedora :: 12 Hangs At Boot?

Feb 23, 2010

i've installed nvidia driver by

yum install akmod-nvidia
every thing went ok , but after reboot the system hangs right after


View 1 Replies View Related

Fedora :: F 14 Hangs At Boot Up?

Jan 16, 2011

Boot-up hangs at black screen with blinking cursor in upper left corner for over 2 minutes before continuing. I select F 14 with grub hit the enter key and go straight to a black screen with blinking cursor. Hitting the esc key does nothing until boot-up actually starts. Afterwards, boot-up is perfect. I had this problem a few upgrades ago and the fix was simple but I can't remember what I did. I've searched every phrase I can think of and can't find a thread that addresses my problem.

I have a F 13 kernel on my machine and have no problem booting it.

Dual-boot, F 14 and windows 7, 64 bit.

View 2 Replies View Related

Fedora :: ATD Hangs On Boot?

Aug 5, 2010

After doing a reinstall, and then upgrading, I have a problem: as the boot script comes to ATD, it hangs. Someone suggested doing an interactive start ---- and it worked! Just say no to ATD, and boot goes well. Of course, I don't really want to do that each time. How do I remove it? That is, get it out of the init.d or rc.d boot procedure

View 4 Replies View Related

Fedora Networking :: VLAN Not Starting On Boot?

Jan 26, 2009

I just have installed FC 10 on a box that I will use as a router/firewall box. On the box I have three interfaces (eth0, eth0.704 (VLAN), and eth1). When the machine boots up, only eth0 and eth1 come up. If I run /etc/init.d/network restart, then eth0.704 will come up. If I add that command to rc.local, then all interfaces come up at boot.

I have the directive ONBOOT=yes in ifcfg-eth0.704. What would cause this vlan interface not to start at boot on the machine?

View 7 Replies View Related

Fedora Servers :: Vncserver Not Starting On Boot

May 21, 2009

I am currently using FC10 on a Dell 4600 with 2GB of ram. I love Linux as it is the most stable OS around. My end goal is to have the machine boot and start the vncserver automatically, eventually using an ssh tunnel to make it secure. My main problem is the vncserver is not starting on boot, I must login as a user then it works great. the error I get is


Basically what happens is the vncserver fails on boot however, if I login to the Fedora box I am able to connect and I get the GDM login screen. I have read many, many posts but have not been able to get over the boot issue. I really want to make this a headless box I can put in another room so I have more room for my musical gear.

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved