I downloaded Fedora 10 LiveCD, then stick it in to my computer. It seems to start up nicely, but then I get this error:
Loading vmlinuz0..........
Loading initrd0.img...........
.......ready.
This kernel requires the following features not present on the CPU: cmov
Unable to boot - please use a kernel appropriate for your CPU.
I've lost my boot manager ,can't boot from harddisk ! I've installed F11 x86_64 kde livecd on a partition aside with FC10 and windows xp, created a /boot ext3 partition + a " / " ext4 root partition and a swap partition shared with F10.I've tried to restore booting windows xp with the windoze restore cd with the "fixmbr" tool, but it did'nt fix i
View 4 Replies View RelatedDownloaded the F10 live CD. Booted to it, got past the white, blue, and dark blue loading bar then my screen would be covered in black and white lines. No sign of the GUI except for a mouse cursor. ctrl+alt+backspace would cause the display to blink off and then come back on to the same thing. ctrl+alt+f2 would bring me to a terminal, logged in as root, but from there I couldn't do anything. startx would tell me I had x running on another screen.
hitting tab when booting the livecd and adding "xdriver=vesa" and "nomodeset" to the boot line. That works. I get to the desktop at native res with desktop effects. Killer. I tried to install; install went flawless, rebooted to my HDD and the same issue, black and white bars. When booted to my HDD, however, ctrl+alt+f2 doesn't bring me to a terminal, it causes my monitor to go into sleep mode and my computer becomes unresponsive so I can't do anything from the command line.
Here's what I'm getting at : how do I get my installed version of F10 to do the "xdriver=vesa" and "nomodeset" args that the livecd can do?
My machine is a home built machine I bought off of a friend. P4 2.4 ghz, GB RAM, 2 80GB HDDs, Radeon x1600.
If I turn off the quiet mode in the boot options, it does throw up some errors (e.g. SQASHFS), and then stops after "starting abrt daemon".
On an AMD Athelon. It worked fine of F9, but started playing up, so I'm looking at upgrading.
Is it still possible to use LiveCD to boot into rescue mode and run fsck?
I just want to run fsck on my hard disk and make sure all is well.
Does fsck provide and logs or records of what it found?
Is it possible to run fsck without LiveCD?
I am trying to install Fedora on my computer but I am getting a kernel panic at liveCD boot after boot menu. It occurs to me for F13 and F14 (all x64, F14 x86 seems to boot fine but I'm trying to host a x64 guest OS on it so I need to get the x64 version to work)
My system specs:
Dual Opteron 265
4GB RAM
Asus K8N-DL (nVidia nForce Pro 2000, BIOS 1010)
I also tried to install F14 in some other computer (which worked flawlessly) and put the HDD into the computer in question, which gave me the same kernel panic.
I've burned the installation media on several different types of media, and i'm getting an error after the 3 bars load (first screen). I've tried the verify and boot option, and it's fine. I'm trying Fedora 10 on a studio xps 1340. The error messageet isCE hpet increasing min_delta_ns to xxxxx nsec twice, thenForce XPAon: 0about 15 times, thenCE hpet increasing min_delta_ns to xxxxx nsec a few more times, this pattern alternates and the xxxxx keeps increasing, starting at something like 10000 and jumping by 50000 each time it reposts.
View 14 Replies View RelatedBasically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition.
I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot.
However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess.
At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond.
Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference.
Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option.
Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery!
I've tried using the command prompt utility at startup recovery but to no avail.
I re-installed my Windows OS today and wanted to install Linux Mint as a dual boot. Before the reinstall, I used the LiveCD Gparted to expand my C: from 25 to 30 GB. All went smoothly.After the fresh Windows install, I went ahead and installed all the hardware drivers and other programs I need. Now I don't seem to be able to boot from LiveCD successfully.On booting from CD Rom, it goes up until the screen with the Linux Mint logo and stays there (I tried giving it time, waited an hour and nothing).Thinking something was wrong with the CD, I tried booting a USB drive. Used Linux Live USB creator to use the same .iso file to boot from. It seems to 'freeze' at the same point.
Formatted the drive, and installed UNetbootin and used the same .iso file. This time, booted it in compatibility mode. A few commands flashed by (links to pictures below), no idea what it means. I've taken a picture, maybe you can tell me what it means? This is the only lead I have to figure out what went wrong (Even if I don't want Linux installed, booting with Live CD to recover data is invaluable)
Pictures I took of the messages in compatibility mode:
[URL]
P.S: I don't know if this is important but I thought I'd mention it. I was in Gparted (in the LiveCD) when the screen froze. I had to hard boot the laptop again, and I haven't been able to get the LiveCD to work since.
I have a MacBook Pro 6,2 that try as I might refuses to boot from live CDs. I have rEFIt installed, and both of the liveCDs I've burnt for 10.10 (32 and 64 bit) do not show up either in rEFIt or when I hold down "option" as my mac boots.
Both CDs will run perfectly as either liveCDs or Installations in Parallels, but I'm looking to (hopefully) someday replace Mac OS entirely with Ubuntu. Being completely unable to see these liveCDs presents a bit of a problem though..
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
I have an Acer Aspire One Netbook. Everytime I try to "burn" the live 11.2 GNOME CD to an USB drive (1GB) it fails on boot. I've tried unetbootin, the application from pendrivelinux.com as well. When it boots, it usually can't find the image. So I have to type in the name of the image by hand then press enter. I actually type the below in:
boot: openSUSE_Linux_(GNOME)
So it starts loading the image in text mode. I don't mind this, except it stops when it tries probing for the CD/DVD ROM.
rebootException failed to detect CD/DVD or USB drive
It just stops pass there. I've tried to add in the options acpi=off, but do I add it in before or after I enter in the image name? BTW, it doesn't boot in my laptop either.
the message on the title only happens with Ubuntu. In Fedora, it just stops booting from LiveCD with "WARNING: Cannot find root file system!". The rest of the symptoms are the same.I'm trying to install Fedora LiveCD on an IBM i Series notebook (model 1161-21X). It's a Celeron powered unit with RAM expanded to 512MB. It has a 10GB HDD, and an internal CD-ROM drive. Although it has two USB ports (1.1), it cannot boot from a USB drive, so no pendrive nor external CD unit solution possible.When I boot from LiveCD, it stops booting with the message above. Looking atsg, there's no CD-ROM driver loaded. Also, there's a char device for sg0, but no block device for it, so no way to mount it. It seems that the driver module has been removed from the kernel. I'm currently running Fedora Core 5 in it. This very same problem happens with any Ubuntu newer that 6 or any Fedora post 7.
View 2 Replies View RelatedI'm trying to boot off a USB LiveCD of Ubuntu 9.10 in order to save some data off a botched UNR install. However when I try to boot off said USB drive, I get this error:
Code:
process 2425: arguments to dbus_pending_call_set_notify() were incorrect, assertion "pending != NULL" failed in file dbus-pending-call.c line 596 The error repeats constantly until I turn off the netbook (EeePC 1008HA).
I've tested the USB drive using the "Check disk" option in the boot menu, and it comes up clean.
I am currently triple booting between Windows, Mac, and Ubuntu. I was having problems booting earlier and somehow Grub2 got replaced by Grub 1.5 command line. I can't boot into Ubuntu anymore, I can only boot into a LiveCD, but I can't figure out how to re-install Grub2.. I tried using Terminal to install Grub, but it still did 1.5 command line. I did sudo apt-install grub and everything. Nothing worked..
View 1 Replies View RelatedI installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
I've been trying to get my LiveCD (9.10) to boot but I can't get it to work. I get it to the main screen then I select "Try Ubuntu without making changes to my system" and I get a whole bunch of information to pop up... looks like techno giberish to me. Then I get what essentially looks like a prompt, except no matter what I type I get nothing out of it. I just want to be able to use my liveCD without issue.
P.S. I'm using a Toshiba Satellite Laptop that has windows 7 installed.
I'm having a lot of trouble with a PC that has been running Ubuntu for ages, since about 8.04 I think. I've run the distro upgrade a few times and it was running 10.04, but for some reason won't boot anymore. So I'm trying to do a fresh reinstall but I can't get the LiveCD to boot. I'm trying to install 10.04 AMD64 desktop.If I leave the CD to boot, I get to a Busybox screen showing the error "No init found. Try passing init= bootarg." and an (initramfs) prompt. This is all displayed at 1280x1024 res - the native image of the screen I'm using.It's an NVidia chipset - an older one. So I tried hitting a key during boot and putting the nomodeset option on. I get the same error, but at a lower resolution
View 1 Replies View RelatedI upgraded from 9.10 to 10.04 this past week. Foolishly, I tried to finish it quickly, and let grub fiddle with my Vista volume, sdb1. I realized it after I agreed. Shucks! Now, my computer won't boot unless I go to the ROM. A bit of history, my original 9.10 install was on a formerly dual boot 160 Gig IDE drive. This one was really just my main Ubuntu drive (sba1). I would have gladly gotten rid of the useless NTFS side of it, but never wanted to bother. The terabyte SATA drive is my Vista volume (and general data drive). It has no Ubuntu nothing on it. When I wanted to boot to Vista, I would boot to sda1 via GRUB2 and then select Vista. It would then come up to the Vista Bootloader, and I'd select Vista and boom, things worked fine.Then I did my ugrade. Somehow, the original grub on sda1 got messed up. I have no idea how. I get the somewhat familiar error: the symbol 'grub_puts_' not found and unceremoniously dumped to a grub rescue>_ prompt. Great! I can enter the ROM and tell it to boot from sdb1, then grub comes up exactly like before and I can select Ubuntu and 10.04 comes up!
So my MBR on sdb1 has now been ruined by GRUB2. Now I know I should never have allowed GRUB to write to sdb1, but why did it also mess up sda1?To make matters worse, I can't use the various boot-to-LiveCD solutions rather common out there. I downloaded the ubuntu-10.04.1-desktop-amd64.iso and burned it. But since I got my new 25" monitor for Christmas, I guess it's too much for the poor old LiveCD disk. I upgraded via the Update Manager, so the video wasn't an issue. Now, when I boot from the LiveCD, the screen turns black and that's it. Take the disk out, reboot, and you're back to the ROM or that beautiful grub rescue>
A 10.10 LiveCD (burned from the ISO image) won't boot my system using my LG GSA-4167B DVD drive which has been working fine for several years.Upon boot, Ubuntu starts to boot up. The splash screen appears. The drive activity light flashes for a while and it sounds as if things are progressing. Then the drive gets into a funky pattern: click-click-spin fast. click-click-spin fast...
The purple splash screen is still present, with 5 red dots (not flashing) The LG drive happily boots up a Windows CD, BartPE CD, Ultimate Win CD, Macrium recovery CD, Gentoo distro CD, etc etc. Only the Ubuntu 10.10 LiveCD is problematic.Oddly, a 10.04 LTS LiveCD obtained with the book "Ubuntu for Non-Geeks" boots OK. (that CD is not burned at home). The LG GSA-4167B is 2005 vintage, with IDE interface. I swapped it for an even older (2004) LG DW1610 DVD drive. That drive boots the 10.10 LiveCD just fine.
I downloaded the 10.10 ISO image a second time and burned a second copy. Same results. The LG website had new firmware available for the GSA-4167B drive, so I downloaded that and flashed the drive. No change - it still won't boot the 10.10 CD. Are LG drives known to be problematic with Ubuntu? Are the CD-DVD drivers on the LiveCD limited in their functionality? If I go out and buy a new drive, should I avoid LG products? Perhaps I'l try burning the 10.10 ISO on to a DVD and see if that makes any difference.
I have Fedora 14 installed on my laptop (Installed with few issues) and I'm trying to install ubuntu on my desktop. I had ubuntu 10.04 installed before on a second (250gb) hard drive (Windows 7 on the other 1TB drive) with a few issues and kinda screwed a few things up trying to upgrade to 10.10. So, I said screw it, and downloaded the live .iso for 10.10 (x64) and burned it to disk. I boot from the live CD and choose the install option to use entire 250Gb disk. I choose my options, including to download updates and install 3rd party software and let the install run its course. Everything seems to be going fine and it asks me to restart. So I say yes, the disk pops out and the screen goes dark... and then nothing happens. The computer's still on but hasn't restarted yet. I hit the del key (Which I use to enter BIOS) and the computer finally restarts. I enter BIOS and tell it to boot from the 250Gb HDD, save and exit. However, it gets stuck at the point where it (It, I assume to be the motherboard) says "Loading Operations System ..." and with a blinking cursor on the line underneath. Nothing happeneds.
I tried again just this morning using the same procedure. I'm once again stuck at the "Loading Operating System .." screen.
EDIT: After poking around a bit more, I remembered I was confronted by a GRUB menu when I booted into Windows 7 HDD. So, I selected Linux from the menu and all seems good. Does anyone know why this is? It's very odd, well at least to me. Why would GRUB be on the windows hard drive? Is this something I should be concerned about?
Trying a LiveCD of 9.04 and it wont boot on iMac 8,1 with Intel CoreDuo2. Using rEFIt or not doesn't help, boot to cd gives a black screen with overlength cursor and takes no keyboard input (CAPS light wont even come on). No splash screen or chance to get a prompt. md5 check of cd against iso file using dd is fine and matches published md5. Tried alternative (text) cd iso and same story. Tried Bootcamp for the initial partitioning and no difference. Mac installation cd boots fine as does OSX, burned cd from multiple machines and no joy. Graphics is an ATI Radeon HD2400. Mac running OSX 10.5.8
View 5 Replies View RelatedI bought a netbook asus 1015pn, which is at first under Windows 7 Starter, and I want to run it under Ubuntu exclusively. I know the main procedure as I already did it on two computers, but here I have a problem to boot my netbook on my external CD burner : I can't find how to access to the configuration of the boot order. using del, I can configure how I want to boot Windows (safe mod, recovering, and so on...) but I can't find how to boot on any other peripheral.
View 8 Replies View RelatedI'm not a Linux noob, by any stretch, but this is driving me INSANE. I have an Acer Aspire 4320 laptop, and I'm trying to install 10.10 on it. The LiveCD, and the LiveUSB, take over 3+ HOURS to boot to a desktop. Then, it can't format the drive. Am I missing boot options (i.e. 'noapic') or something?
Do I set the drive in bios to ide or AHCI? (If set to ide, it takes ALOT longer..approx 45 min to get to the "run" or "install" screen) EDIT: I did manage ONCE to get to 'check this drive for errors', no killers found. (At the 'keyboard screen, I pressed 'space'). Do I need to add any other options here?
What is a better way to start a dual boot with Windows 7 and Ubuntu 10.04, Wubi or LiveCD?
View 9 Replies View RelatedI wanted to put 11.04 on my wife's Win 7 Toshiba laptop so thought I would live boot and see everything worked first. Well it does seem to but I didn't have time to install it then so just shut down. Well on restarting without CD in it failed to boot windows and had to let the recovery process fix it. Now I want to set it up for dual boot at least to start with so until I can get some answers I don't want to risk it. Is there some problem with win 7? Will I be able to shrink the Win7 partition to put ubuntu on? Will Win 7 have an error each time she boots it after 11.04 is installed and run?
View 5 Replies View RelatedI wonder why fedora livecd images cannot be booted by grub2 loopback method, which works with ubuntu and debian.i have tried something like this:
menuentry "fedora 11 i386" {
loopback loop /boot/iso/Fedora-11-i686-Live.iso
linux (loop)/isolinux/vmlinuz0 root=CDLABEL=Fedora-11-i686-LiveCD rootfstype=auto ro
[code]...
I am unable to change the installation location for the boot loader when installing Fedora 12 in the graphical installation mode. The 'Change device' button does nothing when I click on it during installation. I'd like to install the boot loader on my /boot partition. Is there some kind of bug that is preventing me from doing this?I am trying to install from the Fedora 12 386 DVD.
View 4 Replies View RelatedJust installed a fresh copy of F10. After install, when I boot It goes through a screen where it shows 3 bars loading. Once the last bar (white) is finished, and fedora 10 becomes white, nothing happens. If i press any key, it will give me a msg saying something along the lines of "reading contents of drive vol000 this make take a while". I rebooted after 2 hours. When i came back, I waited 8 hours.
View 4 Replies View Related