Ubuntu Installation :: Blank Screen On Boot After Installing Updates
Jun 20, 2011
I recently installed ubuntu(32-bit 10.04) alongside windows 7 in my hp laptop(64-bit).When i installed all the updates available and restarted, a blank screen came after i chose to boot ubuntu.On pressing the power button, ubuntu closing animation appeared & it shut down.Is it because of my hardware drivers not supporting some updates.Do I have to re-install ubuntu..if yes, how do i remove it?..is deleting the ubuntu partion ok..how should i know which updates can be installed..also, are there any problems in running 32-bit version on a 64-bit laptop?
View 1 Replies
ADVERTISEMENT
Feb 8, 2011
I'm running RHEL 5 on a dell server. Recently, after some updates were installed, the server hangs when trying to start the gui (its set to run level 5)to get into the login screen. I can boot into run level 3 but get the same issue when I startx. CTRL-ALT-BackSpace doesn't return me to the command prompt. I get a blank screen with two letters and a blinking cursor. Which direction or log files to look at to start the troubleshooting.
View 2 Replies
View Related
Mar 16, 2010
I'm trying to use the live cd on my HP Pavilion Entertatainment laptop, but I get a blank screen. The Ubuntu logo shows and I get to choose my language, but when I click on "Try Ubuntu without doing anything to your computer" (paraphrased) the screen goes blank. About a minute later I hear the Ubuntu music.
View 1 Replies
View Related
Apr 30, 2011
I created a Ubuntu Server 11.04 32 bit USB installer with the Universal-USB-Installer-1.8.4.4. I booted it up and get to the ubuntu install menu, were my first choice is "English" as language. Then I get to an installation menu were I proceed to "Install Ubuntu Server", but when doing so the screen just go blank and nothing happens. I've searched around for a solution but can't seem to find one.(Note: I've installed Ubuntu Server on other computers without facing this issue, so I don't know what went wrong this time.)
View 2 Replies
View Related
May 27, 2009
Im trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10.
burn the ISO-image using the lowest possible setting.
2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld
3. formatted the ps3 using the xmb. to 10 gigs for the other OS.
4. install Other OS using the usb stick that i made, install successful.
5. switch to other OS, using the XMB through systems settings.
6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit.
7. then i get a media test question , choose skip and loads from CD.
8.Switches to blank screen and nothing else happens.
View 2 Replies
View Related
Mar 1, 2010
The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
View 3 Replies
View Related
Nov 19, 2009
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
View 5 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Oct 16, 2010
I have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
View 3 Replies
View Related
Nov 1, 2010
I have a HP EliteBook 2730p. lspci reports this for my graphic card:
Code:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 30eb
Flags: bus master, fast devsel, latency 0, IRQ 30
[Code]....
I updated from Lucid to Maverick. When I boot with the new 2.6.35-22 kernel the screen stays blank after grub. When I boot the old 2.6.32-25 Kernel everything works fine. I tried to boot 2.6.35-22 in Recovery Mode. When I do this I see some kernel messages in text mode and then the screen goes blank again.
View 1 Replies
View Related
Nov 15, 2010
I upgraded 10.10 from 10.04 from the update button from within the update manager. It seemed to upgrade ok but after I shut down and turned it back on it goes to a blank screen. If I then hold the power button to turn it off and back on it then loads to a boot screen where about 6 options with recovery option are listed. The top 2 options do not work as they just go to a blank screen but the bottom 2 give me some other choice including seeming to boot up to a normal Ubuntu environment. How can I fix it so that it boots to a normal Ubuntu 10.10.
View 8 Replies
View Related
Mar 22, 2011
I have a toshiba satelite pro laptop (can't think of the exact model at the moment) with 4gb ram + 320gb hard drive. i have been dual booting ubuntu for roughly a year, and throughout all that time windows has become less and less used, therefore last night i took the plunge, and went about installing ubuntu(10.10) as my main operating system and removing windows, i did this via a usb, using Unetbootin.
I used one of the .ISO's from the official ubuntu site, and went through the installation processall went well, no errors within the installation process, hard drives were partitioned fine etc, however when i've come to turn my computer on for the first time this morning i get a black screen with a blinking underscore straight after the toshiba logo flashes up and i get the choice to go to bios options.
If i do go to bios options my hard drive is listed fine, and if i try to boot from my usb again, it doesnt work, and attempts to verify dhcp and eventually tells me it couldnt find a boot file, my laptop however is plugged in via an ethernet cable. it doesnt work with or without the ethernet cable. i have tried leaving it for about half an hour and nothing has changed, i also can't boot to GRUB.
View 2 Replies
View Related
May 10, 2010
when booting my system, I get sometimes a blank screen. I searched around and couldn't find a proper solution. ATI Technologies Inc RV535 [Radeon X1650 Series] The only option I have is to reset the PC and hope for it to boot without the blank screen...
View 2 Replies
View Related
May 27, 2010
I have got myself into a situation where I see nothing during boot until X starts, and I have no text virtual consoles. I recently replaced my old 9.10 system running on hardware that seemed to be breaking down, with a new system with both an onboard graphics chip (which I disabled in the BIOS as the 1st step), and an Nvidia GeForce 8400 GS card. I installed Windows XP then Ubuntu 9.10, copied all my files across, modified /etc/fstab, /etc/hosts, etc etc., and as the last step I unplugged the 1920x1440 IBM CRT that I'd used during the install and tweaking, and plugged the display into the BenQ LCD on a Belkin 4-port KVM. Oh, I also installed Windows and Splashtop (that mini-Linux that fast boots from the Windows NTFS partition).
I had a problem at that point: I had a lot of trouble getting any signal on the LCD monitor, and eventually got it working but with the whole display half-shifted off the screen (everything was shifted to the right about six inches), and the Ubuntu splash during boot (the sort of spotlight effect with the glowing horizontal line with the light animating along it left and right) was shrunk and only occupied part of the screen. Nor could X detect what kind of monitor it was. I had a lot of problem with a lot of attempts prodding the LCD monitor to complain "Out of range!" (over the top of the Ubuntu three linked circles). I couldn't fix the problem, and in the end installed the Nvidia proprietary driver and ran its X configurator, and suddenly everything snapped back and began working correctly: X ran happily in 1680x1050, filling the screen properly, and X could now correctly detect the monitor as a BenQ.....
View 6 Replies
View Related
Jul 14, 2010
I've installed 10.04 Server on a desktop three times. The install goes well and after the installation, the server reboots and I can login with no problems. I can also look around the file system and run some of the utilities. My network can also see the server. The problem comes when I restart the server for the first time after the installation restart. The system starts to come up and then the screen goes blank. The computer is still running but there is no video signal to the monitor; and the network cannot see the system. I believe this has something to do with the master boot record but I'm not sure.
View 3 Replies
View Related
Jul 25, 2010
I recently installed Ubuntu 10.04 and now when I attempt to boot into Windows, it just goes to a blank screen. I have some stuff on my Windows partition that I would prefer not to lose (documents, bookmarks, etc.)
I tried running
Code:
But same result. I also followed the instructions here to create a Boot Info script. Results attached.
View 2 Replies
View Related
Sep 10, 2010
I have installed Ubuntu 10.4 on a netbook of mine and am now unable to boot into XP - I get a blank screen.
I have ran the boot info script and attached the result.
View 5 Replies
View Related
Jun 3, 2011
I recently wanted to install ubuntu 11.04 on my computer (which had vista on it and I wanted to just completely wipe that out). After the install I noticed that my monitor would not receive signal during boot (I heard the little drum noise but my monitor said no signal). So I tried following these instructions (which have worked in the past): [URL]
but when I boot the computer I don't have a GRUB menu! It just automaically starts booting ubuntu 11.04. Is this because that is the only OS I have installed? Did I do something wrong? What can I do to fix the problem?
View 2 Replies
View Related
Sep 11, 2015
I have an system that d8.2 appears to install correctly. On first (or subsequent) boot, I get the DB8 load screen, then a quick fsck, then nothing. I appear to have some sort of environment running as I can move a mouse pointer, but nothing else.
CTRL-ALT-F2 results in the mouse pointer vanishing, but nothing else. I expected to end up at the CLI.
I have tried different installs and options, always the same result. This machine ran an earlier version with issues.
View 7 Replies
View Related
Aug 29, 2010
I tried Wubi, and all is fine, but when I choose Ubuntu on the boot menu, it shows some dialog, then just blank. its stays blank forever, so I had to shut the computer off.Then, I burned the Ubuntu iso to a CD and botted from it at startup. This at least showed the purpl-ish install screen. After I pressed enter over install, it went to the blank screen again. just black, nothing appeared.I'm not sure what the problem is. My laptop is fairly new, it shouldnt be having an issue to run it.I have 4Gb RAM, plenty of space on the hard drive, and a 1Gb video card...I have no clue what to do, as this is my first encounter with an Linux distro ever. help?
View 6 Replies
View Related
Jan 4, 2010
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies
View Related
Feb 4, 2010
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
View 2 Replies
View Related
Mar 19, 2011
I am trying to install Ubuntu Server 10.10 on a computer with 5x 1.5 TB HDDs. I went through the process of partitioning the five hard drives into three partitions each:
sd*0 is a 300MB partition for /boot, RAID1, 2 active, 3 spare
sd*1 is a 500MB partition for swap, RAID1, 2 active, 3 spare
sd*2 is a 1.5TB partition for /, RAID5+LVM, 5 active, 0 spare.
md0 is the raid1 on sd*0
md1 is the raid1 on sd*1
md2 is the raid2 on sd*2
During the install, everything seemed to work fine with the formatter, but the installation ended in error. I booted into rescue mode and found that though all the drives were U (in /proc/mdstat), it was resyncing. I let this run (overnight) and the next day, jumped back in and installed the OS successfully.
However, after installing GRUB, when the installation process asked me to reboot, the system came back up with a blank screen (blank, save for a blinking cursor) and didn't move from there. I am thinking that the problem is GRUB, since I can boot into the main LVM partition via the rescue option on the install cd. Here's what bugs me:
[Code]....
View 9 Replies
View Related
Jul 8, 2011
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
View 2 Replies
View Related
Feb 19, 2015
I have just installed Debian 7.8.0 powerpc on my imac G3 (400Mhz, 256Mb Ram). I had repartitioned the drive with the view of having a dual boot machine, had OS9 installed on partition 1, linux installed on partition 2 and a ext4 data partition and a 1Gb swap partition. After I installed OS9, I ran Debian Installation CD and was successfully installed. Rebooted, got through the on screen text past file system check, then screen went blank. I searched Google and forund that if I ran ctrl+alt+f1 and logged in, then ran lspci, I could get the ID of the graphics. So I did, and:
Code: Select alllspci
...
0000:00:10 Display Controller: Advanced Micro Devices [AMD] nee ATI Rage 128 RL/VR AGP
View 2 Replies
View Related
May 15, 2010
and this morning's updates broke x. I get a blank screen instead of the login. I'm running an Nvidia 7900GS. I tried re-installing the Nvidia drivers... no good. I switched to the nv drivers and got further; I got the login screen, but when I try to log in it gives me the KDE splash screen and then takes me back to the login screen. I'm not sure what to try next.
View 13 Replies
View Related
Mar 15, 2010
I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..
I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.
I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.
I've since rsync'd my system back to where it was before the update.
Here's my Xorg.0.log file:
View 3 Replies
View Related
Aug 25, 2011
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated
---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
View 1 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
