I have installed 11.2. When it starts to boot it runs through its startup and then all I get is a blank screen. I noticed in startup just before it says starting HAL it says CPU frequency not supported. I am assuming that this is the issue. I have run 11 and 11.1 on this box and have not had a problem with this. I have a P4 3.00 GHz with 2 GB of RAM.
View 5 RepliesI have recently got a new computer, and I have been trying to install openSUSE 10.3 on it. But, the screen will go blank and become unresponsive if I boot with the default options. When I switch to text mode, it boot and stops when it outputs time: pit clocksource has been installed. Switching to safe settings will make no difference. Right now, I am using openSUSE 11.1, but I'm not very happy with it, so I intend to replace it with 10.3. I'm not sure what the pit clocksource is, and can it be disabled, or some workaround?
my specs are:
AMD Athlon 64
PCIe NVIDIA 7100 GS
NVIDIA MCP61P northbridge chipset
I've been trying to install OpenSuse 11.0 on my ten-year-old Gateway desktop. It has been showing this screen for approximately thirty minutes. In case you can't read it, it says 'Decompressing Linux... done. Booting the Kernel.' I booted from the CD, and the OpenSuse screen came up, and I selected 'Installation' from the menu. And here we are.
View 4 Replies View RelatedI just tried installing OpenSUSE 11.1 onto my Playstation 3. I installed the otheros.bld fine (which I downloaded via a link provided on the OpenSUSE website). I then inserted my 32-bit Gnome CD for installation and restarted my system. Then on startup, a blue/grey screen appears. Here are the links to the screenshot (sorry for poor quality):
[Full Screen]
[url]
[Top Half]
[url]
[Bottom Half]
[url]
As you can see, the only option is for me to select the gameboot, which obviously takes me back to the Playstation XMB. There are keys at the bottom of the screen, but this is only to change the resolution. So I have no option to install the OS.
Does anybody know why this screen appears and have any ideas on how I can get around this problem to install SUSE onto my Playstation?
I am installing SLES on a new server with raid 05, after I went with the setup it copies all the files until It gets to install grub. It gets me an error message installing grub and it wont let me move forward.
[code]...
My yast crashes just as soon as started installing flash. Do have flash saved as .tar.gz on desktop. What is the easiest way to install it? Also searched in Tutorials. Just patching as I go until I build a new PC.
View 10 Replies View RelatedI have 1 Pentium IV 1.7 Ghz machine with 40 gb Seagate hdd which was previously running RedHat version4. Yes very old version running squid.
I am trying to format whole hdd and installing OpenSuSe but after installing it shows booting GRUB and show L letter thats it.
I tried manually creating partitions and 2nd time automatic lay out.
while installing openSuse on my PC, I dont get Desktop but only command line. I can see the following:
1) during boot process its staing: "Failed services in runlevel 5" and "waring GdmDisplay: display lasted 2.1317348 seconds" and " GdmLocalDisplayFactory: maximun number of X display failure reached.
2) /var/log/Xorg.n.log files (n=1-5) "AddScreen/ScreenInit failed for driver 0"
install the firefox 3.6 on opensuse Desktop edition. As my new application software is only supporting 3.6 or greater version of mozilla firefox. i was forced to upgrade or to reinstall my current firefox (version 2.0.0.13). kindly help me and please tell me what is the procedure to install forefox 3.6 or higher version in opensuse 10. i cannot upgrade opensuse 10 to opensuse 11 or 11.3 as my company wont allow me to make modifications in the operating system. i have the latest version of firefox downloaded. the format is tar.gz2 while i am trying to extract it. i find errors in extracting even after extracting successfully i find permission errors.
View 1 Replies View RelatedI have just installed openSUSE 11.2 on one of my computers... the desktop resolution is correct, however the welcome screen resolution is not... How do i change the welcome screen resolution?
View 4 Replies View RelatedI am running OpenSuse 11.3 in a MAC Parallels VM environment. It installed more smoothly than on actual hardware, but the screen resolution is 1024x672 so the screen is off. I have to blindly click in the corner to get the menus, so i changed it to 1024x640 now it looks great, but it doesn't stay. Every time i restart the VM, i have to set the resolution again. Is that a big or is there something I am missing?
View 1 Replies View RelatedI am new to linux . i am trying to install SUSE linux 10 SLES. all the steps are clearly installed but. the final step- Hardware configuration step failed.in this final stage system takes more time and restarts.
View 2 Replies View RelatedI intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View Relatedhow to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies View RelatedNew Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies View RelatedIm trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10.
burn the ISO-image using the lowest possible setting.
2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld
3. formatted the ps3 using the xmb. to 10 gigs for the other OS.
4. install Other OS using the usb stick that i made, install successful.
5. switch to other OS, using the XMB through systems settings.
6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit.
7. then i get a media test question , choose skip and loads from CD.
8.Switches to blank screen and nothing else happens.
After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:
1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg
[code]...
I'm trying to use the live cd on my HP Pavilion Entertatainment laptop, but I get a blank screen. The Ubuntu logo shows and I get to choose my language, but when I click on "Try Ubuntu without doing anything to your computer" (paraphrased) the screen goes blank. About a minute later I hear the Ubuntu music.
View 1 Replies View Relatedi installed fedora 12 on my pc and I also installed the ati drivers from atiand i rebooted and booted back in fedora all i get is a blank screen that does nothing
View 5 Replies View RelatedI installed mesa-dri-drivers-experimental package using yum in Fedora 12. I have an ATI Mobility Radeon HD 3450. After the reboot as soon as the fedora bubble fills up the screen goes blank with a blinking cursor. You can type in that black screen and do nothing else. When you press alt+ctrl+del a few services are stopped and the system is rebooted.
View 2 Replies View RelatedI installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
View 9 Replies View Relatedi installed fedora 12 on my pc and I also installed the ati drivers from ati and i rebooted and booted back in fedora all i get is a blank screen that does nothing
View 2 Replies View RelatedI created a Ubuntu Server 11.04 32 bit USB installer with the Universal-USB-Installer-1.8.4.4. I booted it up and get to the ubuntu install menu, were my first choice is "English" as language. Then I get to an installation menu were I proceed to "Install Ubuntu Server", but when doing so the screen just go blank and nothing happens. I've searched around for a solution but can't seem to find one.(Note: I've installed Ubuntu Server on other computers without facing this issue, so I don't know what went wrong this time.)
View 2 Replies View Related