Ubuntu Multimedia :: Blank Screen After Installing Nvidia Drivers On 10.10 RC?
Oct 7, 2010
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
View 9 Replies
ADVERTISEMENT
Mar 15, 2010
I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
View 9 Replies
View Related
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Jan 16, 2010
i installed fedora 12 on my pc and I also installed the ati drivers from ati and i rebooted and booted back in fedora all i get is a blank screen that does nothing
View 2 Replies
View Related
Jan 17, 2010
i installed fedora 12 on my pc and I also installed the ati drivers from atiand i rebooted and booted back in fedora all i get is a blank screen that does nothing
View 5 Replies
View Related
Dec 10, 2009
I have just installed OpenSUSE 11.2 on an Intel DQ35JO motherboard and XFX 9500GT 512MB video card. After installation the desktop looked fine on the Sony LCD TV I have connected to the 9500GT via a DVI to HDMI cable.
After the first reboot after installation I added the Nvidia repository via the add community repository function in the software sources option in YaST2. I then proceeded to install the Nvidia G02 drivers and the nvidia-settings package. At this point after a reboot I would get a blank screen. Hitting ctrl-alt-F1/F2/F3/F4/F5/F6 has no effect, I could not get any of the virtual consoles to appear. I had to SSH into the box and reboot into runlevel 3.
Once I had rebooted into runlevel 3 I logged in as root and executed "sax2 -r -m 0=nvidia" and got an error message that the configuration server could not be started. I tried executing "sax2 -r -m 0=vesa" and received the same error:
[Code]....
View 9 Replies
View Related
Nov 19, 2009
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
View 5 Replies
View Related
May 28, 2010
i did yum -y install akmod-nvidia and then type xconfig-nvidia on the terminal,and after logging off i confront with a blank screen,so i remove akomd-nvidia [yum remove akomd-nvidia] and also yum erase xorg-x11-drv-nouveau [yum erase xorg-x11-drv-nouveau]but still no gui,i think i should install:
yum install kmod-nvidia
xorg-x11-drv-nvidia-libs.i686
xorg-x11-drv-nvidia-libs.x86_64 [but i didn't]
so how can i have my gui back?
View 5 Replies
View Related
Aug 5, 2009
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
View 3 Replies
View Related
Nov 4, 2010
who installed nvidia drivers on Ubuntu 10.04 and gets a terminal screen on reboot with no GUI.I came across this fix trying to install the drivers on Ubuntu 10.10. later i find that the same thing happens to me on 10.04 but one of the fixes i came across works perfect with it. Ok, so you just installed ubuntu 10.04 updated it through update manager and installed your nvidia drivers but when you rebooted and tried to log on you find yourself in a terminal interface well i found an easy fix for that.
i hope it works for you not saying it will though im new to the linux world only just coming out of windows and i dont know much anyways just log on the terminal and use command "sudo dpkg-reconfigure xserver-xorg" then run nvidia-xconfig command reboot and you should be fine only wish this would work for ubuntu 10.10
View 9 Replies
View Related
Jan 11, 2010
I have a Compaq Presario CQ60 laptop with an Nvidia 8200M graphics card. When I try to enable visual effects I am asked to install the Nvidia restricted driver. When I do this and reboot, I get 6 copies of the Ubuntu screen on my display. Does anyone know what is causing this? I'm not sure which version it installed, I assume either 173 or 185. I have downloaded version 190 from the Nvidia web site. Should I install that version? If so, it is a .run file, how do I install it?Also, how do I reinstall the old driver. I fixed the problem this time by reinstalling Ubuntu, but that will get old if I have to do it too often.
View 4 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
Feb 13, 2011
This is my first time with openSuse as I have heard that openSuse is better forlaptops then ubuntu is. On this laptop, I had already installed ubuntu but decided I no longer liked ubuntu very much, but for no real reason. I encountered almost the exact same problem using both ubuntu and kubuntu, but I had more problems on top of the graphical problem - so I decided to give openSuse a try. I love it so far!Anyway, to the point - I have an Nvidia GeForce GT330M. I have tried installing the drivers the "easy way" and the "hard way" and I have even used the script lnvhw, all to no avail.
What seems to happen is that, after I install the drivers (from runlevel 3, of course), as soon as I restart my computer it initially loads just fine. However, after the loading bar shows up, I get dropped into a console login (tty1), and tty7 & 8 show absolutely nothing, except a blinking cursor.I have two graphic cards in my computer -- an Intel HD card. This is loaded normally and, from "My Computer" it is the graphics card in use, as far as I can tell. The other, as I said, is the nVidia GeForce GT 330M. I'm not much of a "power" user, so I'm not really sure where to start with finding the issue
View 9 Replies
View Related
Apr 28, 2011
since installing nVidia graphic drivers I can't adjust volume using volume button nor using volume keys. The volume icon has 3 horizontal lines like Ubuntu couldn't find audio device. Morover when I try to run pulseaudio there is "/home/chris is not ours" message.
Despite these facts audio is playing and I can adjust volume using alsamixer, but it is extremely not comfortable to enter console each time I want to volume up/down..
View 3 Replies
View Related
May 27, 2010
I'm still getting used to the system. I've been able to install a couple of packages like Disk Manager and Firefox, and was able to mount my ntfs drive. I've only learned some basic terminal commands, but I'm managing ok so far. That is until I looked into what was involved in installing the video drivers I need for my Nvidia 8400 GS card. (ouch!) I'm trying to follow the guide here: [URL] but I've run into a snag in the 'Overview' part: "0. Make sure APT has non-free and contrib sources (consult the sources.list(5) man page for help on doing this) " The link provided [URL] is dead. With only a basic understanding (next to none) of what the sources.list is for, I'm unsure how to fulfill step 0.
View 9 Replies
View Related
May 27, 2011
I got the nVidia driver and Compiz installed. Everything's running fine . But then I tried crtl+alt+F1 - which worked though the font was way too big - and then crtl+alt+F7 to get back to the Desktop but it went to a black screen and blinking cursor instead. I searched a bit and it seems this was a problem a few years back but nothing recent. FWIW, I don't have this problem with Hardy/nVidia/Compiz on another drive in this same machine. Is there a way to fix this?
View 3 Replies
View Related
Jan 12, 2011
Thought I'd put this together based on what I just did as it's hard to find a place where you get complete info in one place for this topic.
Not taking any credit as it's just piecing together stuff found on the net.
Of course this is for my specific hardware and system so YMMV:
- Palit Sonic GT 240 card
- Lucid 10.04.1 64-bit
- Intel DG33FB board and E7200 CPU
- LG monitor L194WT at 1440x900 res
Reason for choosing the latest NVidia drivers instead of the ones available from the System > Administration > Hardware Drivers option is that the latest ones contain specific fixes for my card, that are not available in the others.
Prerequisites:
All of the following is based on a freshly installed 64-bit Lucid 10.04.1 system. Some actions may need modification if you have already been tinkering with Nvidia drivers.
1. Backup your /etc/X11/xorg.conf file if any. The default clean install of 64-bit Lucid 10.04.1 doesn't create this file so unless you have generated and modified the xorg.conf file for your specific needs, skip this.
2. Install the following packages
Code:
If this doesn't work, run
Code:
And paste the output of that in the command above so you get, say
Code:
3. Remove the following packages using Synaptic's 'Completely Remove' option
- nvidia-173-modaliases
- nvidia-96-modaliases
- nvidia-current-modaliases
- nvidia-common
4. Create a new text file disable-nouveau.conf in the directory /etc/modprobe.d/ with the following contents
Code:
5. Download the latest NVidia drivers applicable to your card from here:[url]
6. Save the downloaded file (e.g. NVIDIA-Linux-x86_64-260.19.29.run in my case) to an easily accessible location like your home folder. Make this file executable by running, say
Code:
7. Check that the driver was correctly downloaded.
Code:
8. Run Update Manager, Check for updates and Apply any found
Installation:
1. Restart and choose the recovery option from the Grub options list.
2. Choose the Root Shell option in the list of options presented subsequently.
3. At the root shell run the following
Code:
If you skip this, the driver installer will inform you of the need to do this.
4. This will present you with a login prompt. Login with your admin username and password.
5. Navigate to the folder where the driver installer is present and run it, like
Code:
6. Accept the license text.
7. Say Yes to installing the 32-bit Open GL drivers.
8. I think you need to say Yes/ Accept once more time to initiate the driver installation.
9. Once the driver is installed it will ask you whether it should configure xorg.conf for you, say Yes. This will create the xorg.conf file if not present in your system and modify an existing one if present.
10. Back at the prompt, shutdown the system
Code:
11. Restart and use the normal startup option in the Grub options list, if all goes well you should see your beautiful desktop.
View 1 Replies
View Related
Feb 4, 2010
I have a laptop and desktop both with basic installations of 9.10 (Karmic). And, they are networked with a Mac running OS X 10.6.2. Screen sharing simply worked right from the beginning, to and from the Mac, and of course to and from both Ubuntu installs.
Except there was no feedback from one Ubuntu desktop screen being shared. Mouse clicks, mouse movements, and keyboard presses all seemed to have their correct effects. It was just that the results were not fed back to the remote screen.
During troubleshooting, I de-activated (removed) the nVidia accelerated graphics driver (version 185) that had been installed with 9.10 (Karmic). Then screen sharing started to work with the proper feedback to the remote screen.
I tried the pre-upgrade nVidia driver (version 173) and again no feedback from the screen being shared. De-activate the driver and again screen sharing started to work with feedback.
The bottom line seems to be no nVidia proprietary drivers if I want remote screen sharing to work. But this desktop is primarily used as a HTPC with a HDTV monitor. No games. No 3D. Screen sharing is probably more important, but essentially what am I giving up in graphics capabilities by not using those nVidia drivers?
View 2 Replies
View Related
Apr 16, 2010
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
View 2 Replies
View Related
Aug 6, 2010
It seems the latest nvidia drivers (255.44) don't seem to work on my Lenovo Thinkpad T61 in Lucid. Has anybody gotten it to work? I've tried to just use the System -> Drivers control panel to install and activate the current nvidia drivers as well as installing it from the command line. However, when I reboot, I see the nvidia splash screen come up for a second, then the screen goes blank, and then the nvidia splash screen pops up again, and then the screen goes blank again, over and over. It seems to be in some kind of infinite initialization loop. My T61 has the nvidia NVS 140m chipset. This is frustrating since the previous drivers seemed to work ok. When I try to revert to older drivers, it complains now that they're no longer compatible with the latest kernel headers, etc. I've had to boot up into the failsafe graphics mode to be able to use the laptop.
View 2 Replies
View Related
Feb 5, 2010
I want to install this drivers but it dones't want to show screen after installing them what can i do solve this problem other then uninstalling them in recovery mode the point is to fix the problem not just to go back to ubuntu without driver.
my card is hd3650 512mb ddr 2 shappire agp card with crt screen
View 9 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Aug 9, 2011
I just reseantly got an Asus Essentio CM1730-05 desktop and I installed Ubuntu 11.04 on it with Wubi. After doing so, I installed the restricted driver for my onboard ATI Radeon 3000 graphics. After doing so I get to a blank screen right after the splash screen. Also I think it is frozen because I don't here the Log in music and I have to hard reboot instead of just hitting the power button. If you need to know more about my hardware just ask. Also I have tried two different monitors.
A Dell M991 and my HDTV. I have used the following hook ups to the HDTV-DVI to HDMI and HDMI to HDMI. The Dell M991 is like any older monitor. Just that one VGA hook up. I noticed there is an Asus section so I hope that this is still the right spot. I have tried the following. Replace quiet splash with nomodeset and also i915.modeset=1. I have yet to try i915.modeset=0.
View 4 Replies
View Related
Apr 25, 2010
I did a fresh install of 8.04 alternate disk with LVM then updraded to 10.04 (due to lack of any spare CDs around).
Everything was working fine but wanted to try to get the nvidia-173 drivers installed (I have an old FX5200). Can't start into X now as my plasma says mode unsupported.
At one point I managed to boot into recovery mode then root terminal and removed all nvidia packages and reinstalled nvidia-173 only and followed the instructions listed on the 10.04 release candidate page. Still stuck with the unsupported modes error on my TV though. I have a 720p plasma display (1366x76, I usually run 1280x768 without issues. I'm guessing it is the refresh rate set in the new xorg.conf that is throwing me off, how to adjust this?
An issue that's complicating things however is that when I try to boot into recovery mode I get an error stating 'pcspkr' driver already registered, aborting... then it hangs there until I ctrl-alt-delete and force a restart. This is preventing me from getting to the point where I can select a a root terminal to try to fix my errors.
I have used 8.04 exclusively for a few years and wanted to try something new (still not all that adept at linux setup).
EDIT: I managed to get to root again and just removed the xorg.conf file and that seems to work somewhat. Except now I can't boot as I get a looping mountall: Plymouth command failed that hangs up the process.
View 1 Replies
View Related
Oct 5, 2010
I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards. The problem is that, after that, all what you get is a blank screen, with not even a cursor. The same happens when you install Lucid: blank screen with no cursor. Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset. In the var directory the logs show that the NVIDIA module is not loaded.
View 2 Replies
View Related
Apr 9, 2010
When I had a wubi install(after I restarted, logged in, etc.) a little icon appeared in the top right-hand corner of the screen informing me of an nvidia driver update, which was required to run compiz desktop effects. Now I have ubuntu installed on an actual hard drive(wubi was deleted beforehand) and I get no such icon. So I'm wondering how to update my drivers. BTW I have a 9500GT
View 2 Replies
View Related
Jan 28, 2010
My F11 system display goes blank after some time of inactivity and I cannot see how to disable it. It does not appear to t eht screen savers (all turned off). I have an NVIDIA card,, is it in the card?
View 8 Replies
View Related
Jan 29, 2010
So xorg was acting up, and I went into the Hardware Drivers menu to see if the driver had a problem. The driver was disabled, and could not be activated. I downloaded the new ATI driver. I uninstalled the old one, installed the new one, and ran the config step just like it specifies in the install instructions. Upon reboot, I got a blank screen instead of the login screen.I managed to drop back to the command line and uninstall the driver, so now I'm stuck in ubuntu with one monitor instead of 2.
I'm going to attempt to revert to the old ATI driver (which I still have in my home dir), but I wanted to be sure to get this into the forums before I ruined my GUI again.
View 2 Replies
View Related
Aug 19, 2010
Ubuntu's logo is to big after installing Nvidia drivers, how can i fix this?
View 4 Replies
View Related
Jun 19, 2011
Three times so far I have had to re-install ubuntu because I installed an updated or new Nvidia graphics driver for my GeForce FX 5200 The first time, using Natty Narwhal, I installed an updated graphics driver, and upon reboot, I was presented with a blank screen that did nothing. Being a first-time Ubuntu user, I assumed it was me, or a bug in the new release. So I burnt a Lucid Lynx cd on another pc, and installed that instead. Same problem when I installed a new graphics driver, again via Admin>>Hardware Drivers. Reboot yielded a blank screen. Booted from cd again, as I had no files yet to worry about, and everything seemed to be fine, providing I stayed away from that tempting hardware drivers button.
I then accidentally installed a new driver when installing the dependencies(via terminal) for OGRE (Object-Oriented Graphics Rendering Engine) This time, my terminal froze, Firefox wouldn't boot, and a reboot yielded a blinking, blank login screen that did not do anything. Obviously, I'd like to have a graphics driver, as currently I can't run anything that needs 3d acceleration (Games, 3d simulations, even Desktop effects), but it's not absolutely necessary. So if nobody can suggest a fix, short of a new computer, new graphics card etc, can anybody suggest a way that I can stop myself accidentally installing anything driver-ish? The driver worked fine on windowsXP, but there's two reasons I'm not going back to that: a) I hate it. Hate, hate, hate.b) I've lost the activation key that came with computer, so I can't reinstall.
Further detail can be provided on request. Computer is Dell Dimension 2400, 256Mb RAM, Hard drive is almost empty. Old and slow, but I like it.
View 5 Replies
View Related
