Ubuntu Installation :: Karmic - Failed Update To LiveUSB?
Jan 7, 2010
I created a LiveUSB and that worked. On about the 3rd use I attempted to update packages - about 174 came up I think (I saw that number on another post which reminded me, hence the precision). Two or three dialogues came up, unfortunately unintelligible to me, a Ubuntu novice. Both concerned grub2. The first I just forwarded on and the update trundled on. The 2nd asked me something like whether I wanted grub to update sda or sdb. I checked neither (against the pop-up help advice). The update completed but when I eventually went to reboot from the USB I got a repeating fatal message: something like "Could not load /lib/modules/2.6.31-17-generic/.dep". I had to switch off. It did reboot successfully from a LiveCD.
View 2 Replies
ADVERTISEMENT
Sep 9, 2010
I have a Win vista dual booted with ubuntu, no problem there, all's well. I used live-usb to make a bootable USB with centos 5.0 I created the usb and it will boot just fine. The problem I run into is updating the installation with the package manager. I run the manager and the system prompts for reboot and I get this error:
memory for crash kernel (0x0 to (0x0) not within permissible range.
SDB: assuming drive cache: writethrough
SDB: assuming drive cache: writethrough
/init: line 486: /sysroot/etc/udev/rules.d/ 50-udev*: ambiguous redirect bug in initramfs /init detected
Dropping to a shell.
bash: no job control in this shell
bash-3.2#
View 6 Replies
View Related
Apr 24, 2010
I've been using a LiveUSB I created using unetbootin from Windows Vista/7.
Whenever I use it to install Ubuntu (done it a few times now) or as a LiveUSB to try and rescue my installation, it never shuts down or reboots. It just starts the cycle then hangs on the white Ubuntu logo. As it never gets past this, I'm forced to hard power off, and I'm concerned this could be damaging my mounted system drives? I've decided I should be unmounting before I try and shut it down now, is there a proper way to do this, and can I fix the LiveUSB itself?
View 5 Replies
View Related
Nov 21, 2010
I decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
View 3 Replies
View Related
Mar 14, 2011
having had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 9 Replies
View Related
May 6, 2010
I was so impressed by the screen-shots of 10.04 LTS that i wanted upgrade via the update manager( am using karmic 9.10).Everything went well with downloading the new packages till the point of installation of downloaded packages. Halfway through the installation power went off and when i restarted the system it was stuck at some point with the message
Code: mount: nothing to mount in /dev or something like that. Then i restarted the system in recovery mode and ran "dpkg" to fix broken packages hoping it would fix the issue.It did to some extent that i was type the problem here through the affected system.
The problem is i couldn't send the crash report the first time around and i can't get hold of it now.My system is somewhere between karmic and lucid ("About Ubuntu" shows as karmic and System Monitor shows it as lucid").So i how do i get a clean installation of lucid?
View 2 Replies
View Related
Feb 9, 2010
I am trying to install the gcc package using Ubuntu 9.10, but fail to do so because of an dependency error, which seems to go in a circle. gcc-4.4-base needs libgcc1 before installation, and vice versa. Downloading the recently updated karmic packages did not help.
View 1 Replies
View Related
May 9, 2010
Well the title says it all.. i don't want to lose all of my settings with a fresh install and I only have the desktop CD, so can you do the upgrade with it?
View 2 Replies
View Related
Jan 26, 2010
I have a freshly installed Ubuntu Karmic 32 bits installed in an old machine (Pentium 4 512 Mb RAM) and I'm having a severe problem with apt-get. No matter what repository I choose, I can't update the repository files. I get the following error during a
[Code]....
View 2 Replies
View Related
Mar 20, 2011
I've had a problem doing updates to Ubuntu 9.10 Karmic for months. I'd like to upgrade, but figure I should solve the update issue first. The output of "apt-get update" is:
[Code]....
View 2 Replies
View Related
Apr 23, 2010
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
View 2 Replies
View Related
Dec 2, 2010
I i cannot install updates (181). I'm using 10.10, Heres is the error i get: The installation or removal of a software package failed.
[code]...
View 2 Replies
View Related
Aug 3, 2011
Ubuntu 11.04 so many failed when update:
Code:
Err http://security.ubuntu.com natty-security/restricted Sources
404 Not Found [IP: 91.189.92.167 80]
[code]....
View 4 Replies
View Related
Dec 25, 2010
9.04 has not been updating and is giving these messages.
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...rce/Sources.gz 404 Not Found [IP: 91.189.92.170 80]
Failed to fetch [URL]...86/Packages.gz 404 Not Found [IP: 91.189.92.170 80] .....
Some index files failed to download, they have been ignored, or old ones used instead.
View 4 Replies
View Related
Jan 4, 2010
I'm running 9.04 and trying to use the update manager. On checking for updates, I get the error message:W: Failed to fetch http://mirror.uoregon.edu/ubuntu/arc...ty/Release.gpg Could not connect to 69.219.142.196:21 (69.219.142.196). - connect (111 Connection refused)W: Failed to fetch http://mirror.uoregon.edu/ubuntu/arc...tion-en_US.bz2 Could not connect to 69.219.142.196:21 (69.219.142.196). - connect (111 Connection refused)(more...)This used to work, but now it doesn't. I tried selecting all kinds of different sources in the "Software Sources" GUI. And this seemed to change my /etc/sources.list accordingly. But, whatever the hostname given (above mirror.uoregon...), that same IP address is shown 69.219.... huh? I can browse the web, etc fine from this computer
View 4 Replies
View Related
May 13, 2010
when I update ubuntu with update manager ,an error occurred. the detail is:
E: Problem parsing dependency Depends
E: Error occurred while processing empathy (NewVersion1)
E: Problem with MergeList /var/lib/apt/lists/mirror.bjtu.edu.cn_ubuntu_dists_lucid_main_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.
View 4 Replies
View Related
May 25, 2010
I wanted to try out the new Ubuntu 10.04, but since I don't have any CD's available I thought I could use my 9.10 CD and upgrade from it.
1. Installed 9.10 on the entire disk.
2. Went to update manager(?) and clicked the button to upgrade to 10.04
3. It successfully downloaded all the files.
4. When installing the new files it suddenly said that it failed to update, and it stopped. Then I went to do a hardware test, but none of the menus were working.
I had to do a manual shutdown, and reboot the computer. This time I was met with an error "Unable to mount root fs".
I figured the upgrade was the problem, so I reinstalled 9.10 to try without upgrading.
1. Reinstalled 9.10 on the entire disk.
2. Went to update manager(?) and started the normal update for 9.10 so the system would be up-to-date.
3. Same thing happened now, it fails to update and it makes my computer useless.
I've already checked my hardware for errors, can't find any. I've checked the CD for errors, can't find any. I had 9.04 on the same computer a few weeks ago, and it was rock-solid. Worked like a dream. I'm using Win7 now though.
View 4 Replies
View Related
Jul 15, 2010
I am having trouble upgrading and updating. When updating the file downloads to 99% and then stops. The error message is:
[Code]...
I believe this has something to do with a power outage while upgrading a few days ago. Most of the install completed after rebooting, all except the three 'linux kernel image' files and a few others. Also, as a side issue, Flash plugin and Flex builder are no longer working. This may be unrelated. Does any one have any trouble shooting advice for the issue?
View 1 Replies
View Related
Oct 24, 2010
When i try to install the updates using the update manager, i get the following output code...
View 1 Replies
View Related
Dec 10, 2010
When I try to update with update manager
I'm running ubuntu netbook remix 10.10 here is the error I get every time I try to use update manager to update
View 2 Replies
View Related
Feb 4, 2011
yesterday I performed an automatic security update suggested by the update manager on my virtualized (with VirtualBox on a Windows 7 host) Ubuntu 10.10 installation.
The update somehow failed and left me with an unbootable system. When I try to boot, I am told that various folders, files, and what not are missing. Then the system drops into a busybox and leaves me with an (initramfs) prompt.
This happens with all kernels I get offered by GRUB, although the error messages are quite different from kernel to kernel.
Well, the short of it is this: I don't have the slightest idea on how to get back to a working system and this site is the final straw I'm willing to grab. A complete disaster like this following an update initiated and executed by the system is unheard of in Windows-land; at least I haven't heard of it, yet, and therefore I am going to abandon Ubuntu and Linux altogeteher, if there is no remedy.
View 9 Replies
View Related
May 25, 2011
Whenever I update my Ubuntu, there is an update for gdm that fails with the following error:
W: Failed to fetch url. Hash Sum mismatch
How can I solve this error?
View 1 Replies
View Related
Aug 16, 2014
I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:
Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)
View 5 Replies
View Related
Feb 6, 2010
I'm wondering if it's possible to write changes to a LiveUSB stick. As you probably already know ubuntu gets mounted to a ramdisk to improve performance and save your USB stick's life (I think so anyway, don't quote me on that).
I'm wondering if it's possible to write any changes made, such as changing running services and installed packages back to the USB stick without actually installing ubuntu fully onto the USB stick.
View 1 Replies
View Related
Apr 29, 2011
Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.
View 4 Replies
View Related
Sep 1, 2011
I dont really use ubuntu too much, just for my programming class. Anyways I want to have ubuntu on a USB stick so I can use it on my laptop, netbook, desktop PC at home and desktop PC in class, all of which run Windows natively.
I would prefer the Virtual Machine (VM) on a USB stick but im not sure if its possible to install virtualbox (my VM of choice) on a USB drive. if not then a liveUSB, though correct me if im wrong but would i be able to save files on a liveusb?
If I do go with the VM on the usb stick option, i need an idea what size USB stick to buy so what is the bare minimum space you can run ubuntu on? I also intend to run OpenSUSE which is why i prefer the portable vm option.
View 1 Replies
View Related
May 10, 2010
After a powerdown during my upgrade of Ubuntu 9.10 to Ubuntu 10.04 that rendered my operating system useless I can get to my /home folder. The /home folder is locked and can not be copied or read. This means I can't reinstall my stuff and keep my files. The rest of my data (except for the /root folder) seams to be unlocked. How can I get to my /home folder? Does anyone know how to unlock it?
View 2 Replies
View Related
Dec 21, 2010
I have done a update from Lenny to Squeeze with the update manager within Gnome. And there was a error 126 and the update broke off leaving me with a non working system. The system does start into Debian Squeeze to the command line. Users are in place and a login is possible. X does not work and there a lot of broken and defect packages. I want to repair my system. Is a restore without losing the configuration possible?
View 14 Replies
View Related
Jan 6, 2010
I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .
View 1 Replies
View Related
Jun 1, 2011
I have a USB with two partitions, one FAT32 with Ubuntu 10.04 on it, and one ext4 partition labelled casper-rw. According to the docs this should do to create a persistence installation, but I still get the "can't find persistence medium" error when booting.
Did I do something wrong or is this a bug?
I installed with unetbootin on the FAT32 partition and created the partitions using GParted.
View 3 Replies
View Related
