Fedora Installation :: Just Vent: YUM UPDATE Takes An Hour
Feb 15, 2010
Fresh 12 install. I did a yum install yum-fastestmirror and it took over 30 minutes to download its database, at a speed of 5-9 KB/s. Drove me nuts to wait 30 minutes to download a 60Kb program. Then after the install of fastest-mirror, I thought I was out of the woods, and launched a YUM UPDATE, and its still downloading fedora/filelists_db at 13KB/s. Estimated to take over 20 minutes. After that, it will be downloading the 500MB of stuff - hopefully at a better rate. Sigh!! No way to speed this up?
View 5 Replies
ADVERTISEMENT
Nov 18, 2010
I've been attempting to figure this out for about 4 days straight, so far it has not been fruitful. I've installed Ubuntu 10.04 server onto my former gaming system, Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2 cores with 2 GB ram. Overkill I'm sure, especially for a simple personal voip, htpc, storage server.
The problem is only noticeable when I have the vent server running, on the 10.04 server, and I attempt to connect to it through the LAN via the client on my windows computerEverything works fine and connects, LAN and from the outside, as long as the server is set to DHCP. However when attempting to switch to a static IP address, the vent client will not detect the vent server at all.Aside from an annoyance at having to stick with DHCP, I am still curious as to why the static settings will not function. Something so simple has turned into something quite difficult.
I can still connect to the Webmin interface and Putty into server with either DHCP or static IP enabled.I've performed the following troubleshooting steps so far:1) Followed the directions at https://help.ubuntu.com/8.04/serverg...iguration.html2) Edited the /etc/network/interfaces file through the CLI with nano and through notepad on the windows computer3) Through Webmin I've assigned the static IP, although for some reason it does not include a gateway field.4) I've rebooted the server5) I've issued the CLI
Code:
sudo /etc/init.d/networking restart
Here is the file /etc/network/interfaces:
[code]....
View 6 Replies
View Related
Mar 24, 2010
I recently decided to try KDE4 and would like the change the clock on the panel to display 12 hour format and not the default 24hour format but i can not find where to change this option currently the clock looks like the attached picture. Gnome has this option and I would like to see it in KDE if it exists in the default clock. I am willing to replace the default KDE clock with a seperate widget if one exists for this.
View 1 Replies
View Related
Jan 21, 2011
I want to download open suse but it takes up to an hour to download the 600mb .iso, my internet speed aren't that slow though. Im downloading the Live KDE, Direct Link 32-bit, all the other types of download have strange torrent or metalink fileformat. Is this just me
View 9 Replies
View Related
Jul 12, 2010
I recently broke down in the face of morbid curiosity and clicked that little version update button. it seems to run flawlessly (after i uninstalled the pesky touchpad) but it takes a long time to boot up now. at least a full minute. is this normal?
I will add also that it said my version of grub had been modified (which i dont remember doing, but may have) so i told it to leave the current one in place.
View 2 Replies
View Related
Jan 15, 2010
how to schedule updates for clamav (every hour)?
View 9 Replies
View Related
Aug 5, 2010
I need to change the time displayed in the task bar from a 24 hour clock to a 12 hour format. I could not find the relevant settings in OpenSuse 11.2 and same is the case for 11.3 as well.
how to make the change? I have tried System Settings ---> Computer Administration ---> Date & Time; but I was not able to make the desired change.
Similarly, I have a digital clock widget that shows GMT + 5.5 hours and I need to change that to 12 hour format as well.
View 3 Replies
View Related
Jun 17, 2011
I just switched over to Lubuntu, and so far, it's been great.It's rendering quite well with my laptop, even though the fan is constantly running.I've had some small annoyances that I haven't been able to figure out. How do I get the power button and/or other related actions to the 'start' menu? Is there a way to drag and drop applets like in Ubuntu? How do I setup default brightness like in Ubuntu? How do I change the time to normal US time (12 hour instead of 24 hour)How do I change the time to a 12-hour instead of 24-hour?Is there a software center?
View 2 Replies
View Related
Nov 12, 2010
I booted fedora from an live cd not i have a problem when i want to install fedora formatting is taking vey long its already busy for 1 hour and this is te second time im trying to install fedora does it need to take this long ? I've got an unexpected fault for the second time and pressed debug but nothing is happening keeps formatting.
View 3 Replies
View Related
Apr 9, 2011
I hope somebody can find a solution for the following problem: I tried to install fedora 14 from the life cd on a Dell 6400 with windows XP already installed on it. During the installation process I wanted to shrink the ntfs partition of windows. The actual used size of the windows partition was well below the one I shrinked it to. But the shrinking takes forever ( + 7 hours ) and is still running, which does not seems normal to me. Any recommendations on how to proceed ( solve ) the problem? Processors are running at 99%, so it seems to perform some work. Can this process be cancelled, without harming the windows?
View 4 Replies
View Related
Dec 25, 2009
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
View 1 Replies
View Related
May 11, 2010
I have a script that I want to run for one hour.
I used to use doalarm to make it run for one hour then stop but it is not working consistently so I need another solution.
How would you make a script run for one hour then stop?
View 14 Replies
View Related
Nov 15, 2010
I wish to run a cron job every half hour, where exactly do I put the job? The reason I am asking is that I am used to entering jobs into crontab, I am not used to using fedora and its cron layout.
View 2 Replies
View Related
Jun 14, 2011
I'm running a fully updated Fedora 15.In Evolution's calendar, my days are limited to 12 hours: from 0:00 to 11:45, always.Under preferences->Calendar and Tasks->General, I have "day begins" as 07:00, and "day ends" as 23:30. Changing these numbers has no effect whatsoever. Selecting "12 hour" under "time format" also does nothing.I REALLY hope this isn't a deliberate change by the Evolution developers. My days have normally consisted of more than 12 hours since I was three or four (I'd have to call my parents to ask). Jokes aside, what's going on and how do I change this?
View 3 Replies
View Related
May 28, 2010
I found (Red Hat Fedora Core 6 Server) a CRON entry for "backupmng" that has repeats at 1,16,31 and 46 minutes every hour of every day, 24/7.It is located at:/usr/local/psa/admin/sbin/backupmng >/dev/null 2>&1.
View 1 Replies
View Related
Mar 23, 2010
I'm experiencing a problem with cron.hourly running mcelog.cron on Fedora 11:Quote:mcelog: warning: 18446744073709551600 bytes ignored in each recordmcelog: consider an updateI've read a dead end email thread here from February 2010 describing what I am seeing on Fedora here:Does anyone have any insight into this problem? This is relevant portion of strace(1)ing mcelog which shows /dev/mcelog is open()d and configured correctly:Quote:
open("/dev/mcelog", O_RDONLY) = 3
ioctl(3, MTRRIOC_SET_ENTRY, 0x7fff13129bac) = 0
ioctl(3, MTRRIOC_DEL_ENTRY, 0x7fff13129ba8) = 0
[code]...
View 4 Replies
View Related
May 12, 2011
I've setup two printers through a system running Ubuntu server that are shared with 30-40 users on our school network.
If the printers run out of ink or paper, they stop printing. The lazier members of staff don't proceed to recharge the ink or paper so when somebody does, hours later, the old jobs start printing again which the teachers no longer need or want.
I'd like to automatically have my system purge print jobs older than 1 hour. I'm running CUPS and sharing the printers through SAMBA. How do I do this?
View 1 Replies
View Related
Jan 8, 2009
How to backup in such way that, data will be backed up in every 1 hour...but every time not full data;; only the data/file which have been modified within last 1 hour. Its on locally. And how to back up local data to remote system. Because I have tried with ssh-keygen also , but everytime its requiring password.
View 1 Replies
View Related
Sep 21, 2010
How to I get F13 to show a 24 hour clock in the upper right hand where the time is displayed? I am using the default desktop so I guess that's gnome.
View 2 Replies
View Related
Dec 31, 2010
I had an aging RH 7.3 server that I decided was time to upgrade the hardware and software as well. I chose Fedora 13.This server runs an ircd with several bots connected to it. The bot in question is a perl bot based on the old dreambot script. On the RH 7.3 server, it ran forever. On the new Fedora 13 server, it does an EOF and restarts every hour, exactly one hour after it's been started.Is there something limiting the time that a perl script can execute?
View 1 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
Oct 10, 2010
after downloading all the upgrade packages my install has taken about 8 hrs to complete, Im using a 3.0 ghz P4 with 1.5 gb of RAM on a 74 GB Raptor hard disk,
View 2 Replies
View Related
Jul 22, 2011
a few months ago i did a fresh install of ubuntu 11.04 64-bits. it works perfectly. i'm using firefox 5.0, and in about it says mozilla firefox for ubuntu canonical 1.0.
every now and then, firefox behaves like a runaway train and starts using up all available memory, and using 100% processor time. this has been going on for a week or so. the only remedy is to kill firefox and restart it.
i'm not sure what causes this problem, but i am starting to suspect that it may be caused by flash, java, or some other plug-in or add-on that i have installed.
my add-ons are:
- adblock plus 1.3.9
- adblock plus pop-up addon 0.2.7
- delicious bookmarks 2.3.1
- delicious extension 2.3.1
- flash-aid 2.1.1
- global menu bar integration 1.0.6
- memory restart 1.4
- stumbleupon 3.91
- ubuntu firefox modifications 0.9.1
with the exception of memory restart 1.4 all these add-ons have been installed for a long time, without ever causing any problems. the problems started before installing memory restart.
my java version is icedtea, installed from the repository. i'm frequently using sweet home 3d (a java program) that runs without any problem. it doesn't make a difference whether i have sh3d running or not, the ff problem occurs regardless.
i also have installed ubuntu restricted extras version 43. videos videos don't cause problems. vimeo videos cause problems on occasion when switching to high definition and/or to full screen, but that is a known vimeo problem.
the problems certainly start when i don't use my computer for a longer period of time. i have disabled the screen saver/energy saver, but that doesn't seem to solve the problem. today i had the problem shortly after visiting a website, reason why i'm starting to suspect that the problem could be linked to some plug-in that website uses.
View 9 Replies
View Related
Mar 30, 2011
I am installing CentOS 5.5 64 bit on a HP ProLiant server. The server has a configuration of 2 TB(500x4) HDD and 8 GB RAM. RAID 5 is enabled and mirroring is also going on. I made 7 partitions. Those are:
/boot - 200MB
/ - 80GB
Swap - 20GB
/usr - 100GB
[code]...
The problem i am facing is it takes too much time to format 100GB partitions while installing packages (during installation).
View 2 Replies
View Related
Apr 28, 2009
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies
View Related
Jan 30, 2011
I just decided to completely switch from windows 7 to Ubuntu 10.4. I wiped windows 7 and attempt to install 10.4. it installed half way and gave me an error "cd drive disk error". So I then downloaded 10.10 and burned iso image on a brand new cd disk. Now I am trying to install 10.10 (latest version), and its stuck on Ubuntu Splash screen for last half an hour. It does not seem to be doing anything. What shud I to complete the install?
View 1 Replies
View Related
Jan 5, 2010
I just installed fedora 12 on my new harddrive, and it's booting up extremely slow (but once I'm logged into the system, it all seems to run fine). Right now my set-up looks like this: 1TB HD: new install of fedora 12 300GB HD: Windows xp & my previous install of fedora 12
My previous installation of fedora 12 never booted this slow until after I installed Fedora 12 on my new HD. It seems to freeze right before the log in screen, and after I log in, both installations take about a minute to get to a usable desktop. I pressed the Esc key during startup to see if anything was wrong, and it didn't hang up on anything. However, as it was loading the login screen (where it first begins to get sluggish), I was kicked out of the terminal view and forced to wait in the gui for log in.
View 5 Replies
View Related
Jul 26, 2011
I'm using F15 and I have big problem. Sometimes GNOME-Shell is taking too much CPU, and my computer is slowing down. This is "top".
Code:
[kuba@Kuba-fedora ~]$ top
top - 16:08:18 up 2:05, 2 users, load average: 0.45, 0.49, 0.43
Tasks: 159 total, 3 running, 156 sleeping, 0 stopped, 0 zombie
Cpu(s): 29.2%us, 2.8%sy, 0.0%ni, 67.1%id, 0.5%wa, 0.0%hi, 0.4%si, 0.0%st
[Code].....
View 1 Replies
View Related
Jul 25, 2010
I have an Acer Aspire 1810TZ laptop with Windows 7 on it. I decided to dual boot w/ Ubuntu 10.04 32-bit Lucid Lynx. I was initially getting this issue
Code:
gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
[code]....
View 1 Replies
View Related
Nov 18, 2009
Started testing F12 today, and ran into this. It takes about 30 s to start KPackagekit. Thats about 30 times slower than F11.
View 2 Replies
View Related
