Fedora :: Boot Up Takes Several Minutes
Jan 5, 2010
I just installed fedora 12 on my new harddrive, and it's booting up extremely slow (but once I'm logged into the system, it all seems to run fine). Right now my set-up looks like this: 1TB HD: new install of fedora 12 300GB HD: Windows xp & my previous install of fedora 12
My previous installation of fedora 12 never booted this slow until after I installed Fedora 12 on my new HD. It seems to freeze right before the log in screen, and after I log in, both installations take about a minute to get to a usable desktop. I pressed the Esc key during startup to see if anything was wrong, and it didn't hang up on anything. However, as it was loading the login screen (where it first begins to get sluggish), I was kicked out of the terminal view and forced to wait in the gui for log in.
View 5 Replies
ADVERTISEMENT
Jun 22, 2009
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
View 12 Replies
View Related
Sep 27, 2009
Hardware: Toshiba NB200 with Atom 280 & 2GB, 160 GB HD Everything works great except the boot time. My default boot is F11 & when the system starts in "yuk" Windows it only takes a few seconds! but when I start in F11 it takes 15 - 20 minutes for it to start. No error messages, nothing in dmesg, standard configuration. The same system with Win XP & F10 worked fine?
View 4 Replies
View Related
Jan 25, 2011
It's been a while since this problem started. I have an Acer Aspire 4720z laptop with Ubuntu 10.10 installed. My laptop takes a whole damn 1.5 minutes to boot up and login (measured according to bootchart; I have auto-login enabled) (The majority of this 1.5 minutes is taken up after boot up, so it might indicate a problem with Xorg.)I don't know whether this is relevant, but when I boot up, a message gets displayed: "ata4.01: failed to resume link (SControl 0)". Also, this problem started right around the time I upgraded from Lucid to Maverick, so it could be some problem with my upgrade.find the source of this issue.ATTACHED: bootchart image from last login.boot.log:
Code:
fsck from util-linux-ng 2.17.2
udevd[370]: can not read '/etc/udev/rules.d/z80_user.rules'
[code]....
View 5 Replies
View Related
Oct 13, 2010
This is kind of cross post from the 10.10 beta forum, but since that thread went by without a solution, forum (and thread) are locked and this problem still exists, I'll try again.
When I reboot my machine, it seems to go pretty quickly. However looking at the log it seems that most everything is running after about 8.6 seconds, and then USB starts loading up. The first log entry regarding USB comes at 32 seconds, second one at 62 seconds. The keyboard starts working at 84 seconds and the mouse at 166 seconds.
Note, this same system was running 9.10, 10.4 and various other distros I tested without such problems...
I've removed all hubs, everything is directly connected to the computer. code...
View 2 Replies
View Related
Jun 29, 2010
Title describes the problem rather well. After selecting Linux 2.6.23-22-generic 64-bit in the GRUB bootloader, I am staring at a black screen with a white flashing underscore for almost 2 minutes (usually between 1min40sec and 2min). The Linux kernel is loading here, and it's taking forever!
Once Plymouth starts it barely even manages to flash into view before it's done and I get to login, so bravo @ Canonical.
But seriously, I need that boot time cut down A LOT.
Since I'm assuming it has quite some relevance, here's all my installed programs: (So if you know any offenders you can point them out)
EDIT: I can see it also lists packages I've removed after installing them. Removed packages are listed as "deinstall" and are, obviously, NOT installed or functioning, but their config files remain I assume.
Code:
acpi-supportinstall
acpidinstall
adduserinstall
adium-theme-ubuntuinstall
aisleriotinstall
[Code].....
View 1 Replies
View Related
Oct 30, 2010
I use fedora 13, recently updated. I used to have an issue with wine fonts but it got solved once i upgraded. What isn't solved with the upgrade is the awful long time it takes wine to load anything. any suggestions? It's hard to find a solution on the internet for this issue cause if i search wine takes to long to load it returns how long does wine have to stay in a cellar.
View 10 Replies
View Related
Oct 28, 2010
my laptop(dell xps m1330) takes around 2'30" to boot, I don't remember when it started but it wasn't always that slow. even looking at bootcharts I cant seem to figure out what that could be
full-size bootchart here: [URL]
btw it powers down in less than 5 seconds
View 6 Replies
View Related
Mar 6, 2009
I installed a theme the other day, along with some fonts and some icons. Immediately after that, the time from logging in until I see the desktop is horrible, several minutes. I've removed (as best I can tell anyway) the theme, fonts, and icons, but the delay is still present. Any tips on where I might look to find the source of the trouble? I've tried moving to a different virtual terminal after logging in at the Gnome display manager (this is on ubuntu 8.10), so I could hopefully look at the running processes but the delay happens there as well. Once the desktop becomes visible everything seems to run at normal speed.
View 1 Replies
View Related
Oct 14, 2015
After mapping iscsi storage from my netapp and scanning for new devices I run multipath -v2 to create the multipath device handle under /dev/mapping/. This normally takes about 2 seconds or less on every other linux distribution I use. On Stretch it takes a little over 3 minutes. I have tried several different versions of multipath.conf but the result is always the same.
My most recent multipath.conf file is available here : [URL] ....
and the output of multipath -v4 is available here : [URL] ....
View 0 Replies
View Related
Sep 29, 2010
Is that normal for Ubuntu Linux to take 5 to 10 minutes for computers to show up in the Windows Network Neighborhood in Nautilus after startup. It also takes 5 to 10 minutes to show Samba shares on my windows computer using NetBios (not however by entering ip). Is there a lag because of a set time of netbios network broadcasts to exchange netbios information to resolve by WINS. Is there any way this can be sped up so I can use my network immediately? Is there any way to force these broadcasts?
View 1 Replies
View Related
Jul 21, 2011
Using Excel 2010 on a regular basis and have just had a new server installed at work. Since all 6 computers are joined on our network we seem to be having problems with opening Excel and when it does eventually open, it takes around 3-5 minutes to save a spreadsheet.
View 1 Replies
View Related
May 15, 2010
I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.
View 2 Replies
View Related
Jun 20, 2011
I have been having trouble with Ubuntu 11.04 when connecting to the Internet via Wireless Networking. It will connect, and has good speed once it connects, however it takes upward of 10 minutes and over 20 times of me clicking 'Connect'.
Is there a way to connect to a wireless network quicker? My network is unsecured and without a keyring. It is not only slow connecting to my network, but the network of other's.
lspci information:
View 2 Replies
View Related
Apr 28, 2011
I just installed 11.04, and the software center is almost unusable. I'm currently clocking about 32kb/s on my modern laptop. Does anyone know how to fix this? PS- During install, it took 20 minutes to download the language packs, and it said I would be there close to forever for the update downloads.
View 8 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
Jun 7, 2011
i am working with an old system that uses a BIOS meant for embedded systems. According to my coworkers this thing boot some version of debian about two years ago. currently I have used there old image and a new one I made of the latest Debian stable build. both images fail to get passed grub.
to be clear the BIOS simply replies "loading grub" takes ten minutes and then crashes.
has anyone ever had trouble with grub crashing systems? this problem seems odd since is did boot with this two years ago and i still have that image.
View 4 Replies
View Related
Jun 25, 2011
Some days ago I switched from Ubuntu to Fedora and it is just great, Gnome 3 looks awesome. I waited for the installation of Fedora until I got my new OCZ Vertex 2 SSD and the first benchmarks were astonishing. The SSD has an average Read/Write speed of ca. 270Mb/s. Well, now I installed Fedora 15 and I was expecting a boot time of less than 20 seconds, but in fact it takes 30 seconds. By way of comparison, Ubuntu takes on my old HDD about 27 seconds, so a bit less than it takes on the SSD.
Then I tested some software, I started Eclipse and compared the start time on Ubuntu (HDD) and on Fedora (SDD). Starting Eclipse from the HDD took about 6 seconds while starting from the SSD took about 7 seconds. The differences in the results are not big, but taking into account that the SSD is at least twice as fast as the HDD the results are really strange. Now I would like to ask you how I may increase the performance of Fedora on my SSD?
Some notes about my hardware:
Intel Core2Duo 3GHz
4GB Ram
Sata2
On this screenshots you can see both drives in comparison, the ssd is much faster.
View 2 Replies
View Related
Aug 21, 2009
I have f11 installed on as a vm on virtualbox 3.0.4. It takes forever to boot. I modified /etc/udev/udev.conf and changed udev_log="info" to udev_log="debug" and rebooted the system. When the progress bars came up I hit Esc and watched the boot process. Udev runs through approximately 7-800 items before it ever tries to load anything else. Is there a way that I can change this? I have been through the forums and can't find anything similar to this. I thought maybe that it was the "Floppy" issue so I went ahead and blacklisted the floppy drive (as this is a vm I don't have access to the BIOS) anyway.
View 2 Replies
View Related
Oct 25, 2010
After Gnome logon it may hangs in any moment (window scroll, app start, opening url)
If sound was playing in that moment it continuously repeats last sample (about 1 second length), but do not respond to mouse move/click or keyboard. If to let it stay in this state nothing change - sound sample still repeats and no response to input. I need to reboot it by reset button. Sometime when I press reset nothing happen then after couple of seconds computer turns off, after 1-2 sec on and then starts booting.
During first 15-20 minutes after booting it may hangs multiple times but after that it works without problems.
Tried do not logon 20 minutes after boot - do not help, it hangs anyway. Only helps logon and do nothing for awhile.
This behavior have started after F12 installation. F13 installation changed nothing, only F11 worked perfectly.
View 5 Replies
View Related
Apr 15, 2010
So my Dell latitude E6400 running fedora 12 (2.6.32.11-99.fc12.i686.PAE) is usually connected to a big screen (1920x1200).
Now each time I boot, X becomes unresponsive shortly before or after login for a couple of minutes, and then goes back to normal. This happens both with and without connection to the big screen.
The error messages associated to this seem to be like this, my /var/log/Xorg.0.log is cluttered with them :
Code:
I normally start my computer in the morning, walk off for some tea, and come back when X is functioning, but when I'm in a hurry it's pretty, or very, annoying ... drinking tea / coffee to wait for a computer to start is something people did in the 90s, it shouldn't be default behaviour in 2010 ...
View 11 Replies
View Related
Sep 10, 2010
I have a Computer, It came with Windows 7 64bit on it. I installed Ubuntu through WUBI. I used the Windows Disk Management program to resize my HDD. I shrunk the main drive and created a 20 gig free space. I installed WindowsXP on this 20g space. I had to change from AHCI to ATA. I started my new XP installation. As I should have expected my the screen that let me pick between Windows 7 and Ubuntu was gone, and it just said XP. Well thats cool. I get in XP use bcdeasy and use the install Win7 to mbr. So I restarted. Great I now I have Ubuntu and Win7... but no XP. So i think, okay, ill boot into Ubuntu, use the update grub command and XP will be there, so i do it and restart. No XP, So i try to boot into Win7 and see if i can do something in there.. No luck it says it can't boot and takes me to a startup recovery thing. Which, as Windows recovery things tend to do, doesn't find anything wrong. So I have Ubuntu now, which is great, but I do need Windows.
View 4 Replies
View Related
Mar 15, 2011
I'm using mencoder to capture audio from a Encore ENLTV-FM3 video capture device. I have recently noticed that, since one week ago, when the machine was forcibly restarted due to a power outage, all recordings are slightly pitched, they play back slower than they should.
I narrowed down the problem to the following command line:
$ time mencoder -really-quiet -tv driver=v4l2:device=/dev/video1:chanlist=us-cable:audiorate=32000:alsa:adevice=hw.1:input=0:amode=1:normid=11 -endpos 00:10:00 -ovc copy -oac pcm -of rawaudio -o test-32000.wav tv://69
real 9m54.886s
user 0m5.536s
sys 0m1.740s
$ ls -l test-32000.wav
-rw-r--r--@ 1 martin martin 76800000 Mar 15 17:20 test-32000.wav
Somehow, mencode managed to gather precisely 10 minutes worth of raw audio in 9m 55s. That's not physically possible, unless the capture device's A/D converters are "overclocked". I can't think of any other explanation besides hardware failure. Can that be? Could it be that something got burnt during the power outage and now the capture device's internal clock went nuts?
Since the machine's restart, I've also noticed dmesg is flooded with entries like this:
CE: hpet increased min_delta_ns to XXX nsec
Which seem to indicate that the computer's high precision event timer is somehow out of sync. Does this have to do with the audio issue? Can it be that the audio converter's sample rate is linked to the HPET? I'm totally lost here. Has anyone bumped into something similar?
View 2 Replies
View Related
May 19, 2010
I've been using lucid since the pre alpha and I don't know why but I think it kept getting slower and slower to me until I've noticed "Windows" for god's sakes starts up faster than lucid! I've looked for some suggestions but nothing paid off. I've made a boot chart for my boot. I've noticed mount.ntfs-3g is taking too much time but how to stop it. My fstab is
Code:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
[Code].....
View 8 Replies
View Related
Jul 26, 2010
After I installed a new hard drive, when I booted up into Ubuntu, it would give me this error: "failed command: WRITE DMA". So I tried the workarounds and I guess it just covered the log with the Boot Splash, now it's taking a long time just to boot up.
View 9 Replies
View Related
Nov 15, 2010
I recently changed my computer so it would auto boot into Ubuntu, but if I hold down the shift key, I can bring up the GRUB menu so I can choose Windows in the rare times I use it[URL]Anyway, I noticed that when I did that, it actually took longer to boot. I timed it today and it took 45 seconds from the time I pressed the power button to get to the login screen! My friend uses Linux a lot and says even with Ubuntu (which he thinks is "too slow") it shouldn't take that long.
View 1 Replies
View Related
Mar 16, 2010
reason is that the slack11 server in question was running for more than 150 days non stop. but due to a long power failure i had to shut down the ups yesterday and so the server too. anyway, i rebooted everything and somethings didn't quite work like i remember them to work from the last reboot (i.e. without anything that would alarm me).. ie. rc.syslog takes a million years (about 5mins+) to process during the bootup. i have no idea why, from then on boot process continues fine.
the only thing that might be remotely related is that recently i installed ulogd in order to log the firewall to a different file. i decided to start my rc.ulogd directly after the rc.syslogd start in rc.M. now, it doesn't seem to have any effect if i comment out the startup of rc.ulogd... rc.syslogd will still take ages to process during boot. if i comment out rc.syslogd from rc.M then booting will proceed at the expected speed and once i login, and start syslogd manually it will fireup quickly... i have tested this configuration in a slack13 box i have recently setup as a router-gateway and it worked fine there.. no prob with syslogd...
View 1 Replies
View Related
Oct 27, 2010
i have just installed opensuse 11.3 on a pc which was once a Windows XP,the configuration for opensuse installation well everything is good.The problem is when i switch off or reboot the pc,.at the 1er black screen where u see the 'boot' its says
Verifying DMI Pool Data........Update Success
(take 2mins almost then)
GRUB Loading stage 2......
(takes up to 10mins or more)
then i got this:
root (hd0,1)
Filesystem type is ext2fs,partition type 0x85
kernel /boot/vmlinuz -2.6.34.7-0.4-desktop root=/dev/disk/by-id/ata-HDS728080PL
[code]....
View 2 Replies
View Related
Jan 29, 2010
ok this is going to sound 1/2 retarded
i have a desktop that had had vista on it forever and i decided to install ubuntu on the 10gigs i had free for the longest time so i installed ubuntu but i did a stupid thing in my opinion and installed grubboot loader on the windows partition now when i try to boot vista it takes me back to the bootloader and i need to be able to use both vista(grphicswork) and ubuntu(networking) i cannot loose my vista files by re installing vista
View 2 Replies
View Related
May 22, 2010
I installed bootchart and uploaded an image of my latest boot on imageshack: [URL] but I do not know really how to interpret it. Bare in mind that I did not use to have this problem while running Karmic...back then the OS started twice as faster as it does now after the update (now it takes at least 75 seconds to boot) .
View 9 Replies
View Related
