Ubuntu Servers :: When Attempting To Switch To A Static IP Address, The Vent Client Will Not Detect The Vent Server At All?
Nov 18, 2010
I've been attempting to figure this out for about 4 days straight, so far it has not been fruitful. I've installed Ubuntu 10.04 server onto my former gaming system, Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, 2 cores with 2 GB ram. Overkill I'm sure, especially for a simple personal voip, htpc, storage server.
The problem is only noticeable when I have the vent server running, on the 10.04 server, and I attempt to connect to it through the LAN via the client on my windows computerEverything works fine and connects, LAN and from the outside, as long as the server is set to DHCP. However when attempting to switch to a static IP address, the vent client will not detect the vent server at all.Aside from an annoyance at having to stick with DHCP, I am still curious as to why the static settings will not function. Something so simple has turned into something quite difficult.
I can still connect to the Webmin interface and Putty into server with either DHCP or static IP enabled.I've performed the following troubleshooting steps so far:1) Followed the directions at https://help.ubuntu.com/8.04/serverg...iguration.html2) Edited the /etc/network/interfaces file through the CLI with nano and through notepad on the windows computer3) Through Webmin I've assigned the static IP, although for some reason it does not include a gateway field.4) I've rebooted the server5) I've issued the CLI
Code:
sudo /etc/init.d/networking restart
Here is the file /etc/network/interfaces:
[code]....
View 6 Replies
ADVERTISEMENT
Feb 15, 2010
Fresh 12 install. I did a yum install yum-fastestmirror and it took over 30 minutes to download its database, at a speed of 5-9 KB/s. Drove me nuts to wait 30 minutes to download a 60Kb program. Then after the install of fastest-mirror, I thought I was out of the woods, and launched a YUM UPDATE, and its still downloading fedora/filelists_db at 13KB/s. Estimated to take over 20 minutes. After that, it will be downloading the 500MB of stuff - hopefully at a better rate. Sigh!! No way to speed this up?
View 5 Replies
View Related
May 17, 2010
I just upgraded to 10.04 and I want to set the static ip address but I can't find where to do it.
View 2 Replies
View Related
Mar 7, 2011
Im running ubuntu server 10.10 on my wirtual mashine at home. For now i have few service installed and configured:apache with phpand mysql support,ftp,phpmyadmin.. My ip address is not static, i tryed to configure by following some guide but without success.
First i edit this in /etc/network/interfaces (changing dhcp to static
Code:
# The primary network interface
auto eth0
iface eth0 inet static
[Code].....
View 9 Replies
View Related
Jan 14, 2010
I was trying to assign the static IP address of my internet connection to my home server and managed to make a mess of it. I've configured the router to assign it the address every time but when I rebooted everything the server is cut off from the network completely (rather unfortunate with a headless server...). The only file I've edited on the server when trying to do this is /etc/network/interfaces, everything else network related is default. My intention in editing the file was to make the server accept the IP address assigned by the router since the router was already configured to assign the right one. I put in
Code: inet dhcp in the /etc/network/interfaces file, is that wrong? What is that line supposed to be?
View 9 Replies
View Related
May 23, 2010
what are use cases for static ip address for clients or servers.
View 3 Replies
View Related
Apr 6, 2010
How do I decide what IP address to enter in my config file when assigning a static IP. All of the instructions I can find say something like "of course you should modify the file according to your own settings." Should I just use the gateway and IP that returns from "iwconfig" and "route -nee"?
View 5 Replies
View Related
Aug 10, 2009
When DNS server is configured on Windows server, it will automatically detect and catch computer names and IP address. With Linux (BIND), I have to enter each clients manual under zone file. example (computer1 IN A 10.10.1.4). is there anyway to make Linux detect client automatically as windows does?
View 6 Replies
View Related
May 1, 2010
i am trying to assign a Static IP address and for the life of my i cannot get it to work Can someone explain to me the easiest way to do it and if i restart the server it won't get lost either.
View 1 Replies
View Related
Mar 15, 2010
i have followed multiple guides to make my home server use a static ip address. no matter what i do it always reverts back to its dhcp address after about 2 minutes. how do i get the static ip address to stick, or be permanant.
View 9 Replies
View Related
Nov 10, 2010
I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254
This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.
View 8 Replies
View Related
Sep 4, 2010
I am trying to point my domain to my server with a static IP address. My domain is registered with Network Solutions and they ask "Primary and Secondary DNS" settings in their setup. What primary and secondary DNS settings I need to give when I have a dedicated server with static single IP address with BIND installed.
View 1 Replies
View Related
Oct 22, 2010
setting up my ubuntu server I would also like to run ubuntu desktop for the GUI.
setting up the static ip address with a 2wire gateway from att.
View 4 Replies
View Related
Aug 12, 2010
Am attempting to set a static IP address on a server (to be used with Mythtv) and is running mythbuntu 10.04 (apologies if this is the wrong place to post this). I can set a static IP address that is in the range of 192.168.1.x on other machines on the network but when I try with the server it is not able to connect to the network. When using the DHCP rather than manually assigning the address it is assigned an address with the 10.0.0.x range. Why is it doing this I have never have this problem on other ubuntu boxes (and this one prior to a format of the OS).
The router/gateway is 192.168.1.1 I did have a DHCP server on the mythbox before formatting it and I was able to assign a static 192.168 address and retain internet connectivity. But I have re-enabled the DHCP server on my router since formatting the box.
View 1 Replies
View Related
Aug 6, 2010
Reading some examples on net and copying some codes I was able to build a (frankstein) server that accept connection from one client and receive and send messages to it. The big problem that shows up is that I don't know when client disconnects from my server.
I've been looking for a solution, but no success. I'd read about SO_KEEPALIVE option (which could solve my problem), but I don't know how to use it (how to check the value of it).
I can't use ping because the server (machine) could be running, but not the client (software).
Anyone knows a good tutorial or how to (for beginners like me xD) of TcpIp sockets using c/c++ and how to detect when a client disconnect?
I don't know sockets very well.
View 6 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Apr 26, 2010
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies
View Related
Mar 9, 2011
I am writing a TCP server in C, and the server listens to incoming client connections and accepts them. It then creates a thread to handle the client. The clients are expected to only receive data from my server and not send any data. So if I use a select() call with a recv(), I believe that the recv() will just block forever since there will not be any data coming from the client. If I use a non-blocking recv(), then this will just return a 0 which tells me nothing because the client is not expected to send any data. I am not sure if I have misunderstood some socket concepts, but I need a solution to detect when the client has disconnected so that I can close the socket and stop sending data to the client. As I understand it, simple ACKs etc are not captured by the recv(), and only data sent by the client will cause recv() to return a non-zero value, so I am not sure how to know when the client has disconnected.
View 7 Replies
View Related
Oct 15, 2010
I'm troubling setting up my dhcp3-server.Although I've configured "option domain-name-servers 192.168.1.1" in my dhcpd.conf my windows-xp-clients dns-server address is set to 192.186.1.1.This is strange! All other things seem to work correctly.This is my dhcpd.conf:
Code:
ddns-updates on;
ddns-update-style interim;
[code].....
View 3 Replies
View Related
May 18, 2010
I have installed a working DNS server on my home network. I have an unique server, devoted to dns, gateway, storage which runs opensuse 11.0 (I known that it is rather old). Two new clients require DHCP. I have installed, using yast, a very simple DHCP server, according to the following config:
option domain-name "XXX.XXX";
option domain-name-servers 192.168.0.1;
option routers 192.168.0.1;
[code]...
(I have tried to add "ddns-update-style none", and to remove the ntp-servers option, since my server is not a time server, without success). Unfortunately, even if the client (a mac running OSX 10.4) receives a right IP and gateway address, it displays neither dns server address nor default domain name. The same mac, on my office network (not managed by me), receives everything.
View 5 Replies
View Related
Jan 25, 2010
Over the last several days, I've been trying like hell to share my (wired) Internet connection with a netbook, running Windows XP, attached via crossover cable to my desktop's extra NIC (eth0). The eth0 link is established, but I can't get to the Internet from the Windows XP machine.I can ping one machine from the other, but any bits sent from the Win XP netbook mysteriously disappear when trying to reach any website.
There is no firewall running on the Ubuntu machine as far as I know. Windows Firewall is likewise disabled on the Windows XP machine. The Ubuntu machine connects to the Internet through another wired NIC, eth1.In Windows XP parlance, what I am trying to do would be called "bridging," where eth0 and eth1 would be the two parts of the bridge. In fact I already made it work, with both the netbook and my desktop running Windows XP. It took about 5 minutes.I can't believe what a huge pain this has been in Ubuntu. I'm pretty much ready to give up. There seems to be no way to get an Ubuntu system and a Windows XP system to share an Internet connection.
View 5 Replies
View Related
Jun 17, 2010
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
View 3 Replies
View Related
Mar 27, 2010
I just installed sever 9.1 with webmin. Everything was working great, untill it tried to set it to a static ip address. I tried to do it thur webmin. after it rebooted the server and it now stops at this line
init: network main process (61 terminated with status 1
Any idea what I did wrong? Or how I can fix this?
View 6 Replies
View Related
Sep 27, 2010
(Cross posting this from[URL]I am running an Ubuntu 10.04 server installation and I recently had to switch it from DHCP to static ip. I edited /etc/network/interfaces file and switched
"iface eth0 inet dhcp"
to
"iface eth0 inet static
[code]....
You'll notice the IPs are a little strange. This is because the sever is now on a special subnet dedicated to isolating specific servers. I also edited the resolv.conf file to include the proper DNS servers (including one of Google's just in case all hell broke lose).The problem is that, seemingly randomly, the machine will lose the ability to talk to the outside world. I know the machine is still up, but it acts like it has no networking at all.
I think part of the issue is that there is no DHCP running to this subnet (nor will there be) and the dhclient seems to still be running on occasion which causes some sort of conflict (no idea what) which causes networking to die. I cannot, however, remove the dhcp3-client package as it also causes the ubuntu-minimal package to be removed and that would be bad.
View 9 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
Apr 15, 2011
I am running Debian Squeeze with the following basic services running:DNS
DHCP
Samba
Squid
The server is setup with three NICs: eth0 (WAN1), eth1 (WAN2), and eth2 (LAN).The server addresses clients with an IP range of 10.0.30.1 - 10.0.30.254. Some clients will be set with reservations so they fall into the 10.0.40.1 - 254 range.
What I want to do is have any outgoing external traffic coming from the first range (10.0.30.0) to use WAN link 1, and any outgoing external traffic coming from the second range (10.0.40.0) to use WAN link 2.
I have sort of got something working. I have created a bare minimum transparent squid3 setup on port 3128, and set the iptables as follows:
Code:
iptables -t nat -A PREROUTING -i eth2 -p tcp -m tcp --dport 80 -j DNAT --to-destination 10.0.0.1:3128
iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128
iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128
I can get internet access, however obviously it only goes through one WAN link. It also seems slower than it should be. I experimented with tcp_outgoing_address, but seemed to not be my friend.
View 4 Replies
View Related
Feb 13, 2010
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
View 6 Replies
View Related
Aug 29, 2010
I've got a headless server (32 bit 9.04/9.10, can't remember) that started refusing SSH and HTTP connections a few days ago, and I'm just getting around to hopefully fixing it. The problem is that I can't even connect to the darn thing. I've plugged in a mouse, keyboard, and monitor, but the monitor tells me that it has no signal. I know the monitor works with the computer, as I used the same one to set up the server.
Just for kicks, I even tried to put in a live CD, but that didn't help. Any ideas on how I can connect to this thing?
[Code]...
View 2 Replies
View Related
Nov 9, 2010
I own a ubuntu-server (2.6.35-22-server x64) - a home router / NAS / etc assembled at the mini-itx motherboard with no attached keyboard / display.The problem is that the system does not detect the occurrence of SD-card in a USB-card reader. Card reader is normally detected and visible in the system.When I insert SD-card in cardreader, in "dmesg" and, accordingly, "udevadm monitor" does not display any events.If reboot with connected SD, everything works fine, but, of course, there is no event when removing SD.On the forum topics if problems arise, it is only with automounting. But it's not. I do not have events from kernel, that he discovered the SD-card.In the desktop version there is no problem.I installed the generic kernel; comparing kernels configurations for desktop/server versions, comparing the output "udevadm monitor" at the time when I inserted the SD-card on desktop/server, etc. - useless.I don't have more ideas. I don't understand something. Probably there is no package.Almost ready to give up, put the desktop version and delete unnecessary.On desktop versions missing events displayed as follows (the output "udevadm monitor" when inserting SD-card):
Code:
KERNEL[985153522.094479] change /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host4/target4:0:0/4:0:0:3/block/sdf (block)
[code]....
View 5 Replies
View Related
Jan 23, 2010
I'm running Ubuntu Karmic 9.10, I just downloaded Firefox 3.6 (the static tarball package, not the source code) and it runs smoother than 3.5, but it has one small issue: it won't use my flash plugin!I don't want to install via APT (the Mozilla Daily Builds PPA breaks my Firefox installation) but I DO want to use Firefox 3.6, so how do I make the static binary version of Firefox 3.6 use flash?
View 3 Replies
View Related
