Fedora Installation :: Cannot Partition And Takes Errors,it Is Of Primary Partitions That Is About 77GB?
Dec 25, 2009
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
I'd be very grateful if some charitable person could help with a problem. I have a portion of unallocated space, 15GB, which is situated to the left of all my other partitions (according to GParted). Unfortunately I already have 4 primary partitions. Although I am willing to delete my last partition, I still amn't sure how I could go about reclaiming the 2 portions of unallocated space under one new partition
I am having a 250 GB hard disk in my Acer Laptop. C: - a 65 Gb partition with Win7. D: - a 150 GB partition with general data. and 2 partitions by default - a 13 GB and a 3.5 GB one( I guess backup and recovery by Acer or sumthn) I shrank the D: partition to 135 GB and had made the 15 GB unallocated space to install Ubuntu. Everytime I checked I got the free space shows as 'unusable' in the Ubuntu partitioner. I tried shrinking again with EPM, Win Disk Management and also Ubuntu partitioner. Each time the free space which showed up said Unusable. A friend of mine advised me to defragment and use 'GParted' through the live cd. I did so and when click on the unallocated space to format it said "IT IS NOT POSSIBLE TO CREATE MORE THAN 4 PRIMARY PARTITIONS. If you want more partitions you should first create an extended partition. Such a partition can contain other partitions. Because an extended partition is also a primary partition it might be necessary to remove a primary partition first."
I didnt know all of my partitions were primary! And I dont even want D: to be primary. It just is there to hold some data.
I'm trying to install Crunchbang on a partition I made. I managed to resize my Ubuntu for space to install Crunchbang (which essentially is another Linux OS).I currently have Ubuntu 10.10 and Win7 currently installed. The error I get in GParted is the one above in the title. I know there is a way to install a third OS but this problem is killing me. I need some to help my step-by-step. I'm not that bright when comes to technical terms and writing stuff in the terminal. My current filing system:
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I'm trying to install Ubuntu, Windows 7, Meego, and Android x86 for a project. Here is what I have done so far: Partition the drive into 4 primary partitions of equal size (10gb each). Install Windows7, Android, and Meego onto separate partitions, in that order. Then, install Ubuntu, hoping that GRUB automatically detects the other OS's and creates entries for them. Unfortunately, the only entries in GRUB are for Ubuntu and Windows 7. How do I get to the other 2 OS's (Android and Meego) to show up?
I have first installed Windows7 to sda2 (sda1 being the MBR). Then I installed Ubuntu as follows: sda3 /boot, sda5 swap (sda4 being the Extended partition), sda6 /, sda7 /home. So far so good. Windows and Ubuntu worked fine. I also planned to create another partition for data and two more partitions for Arch Linux. And here is the problem.I just assumed that the Extended partitions were created logical but actually they are also primary. So, as things stand, all my 7 partitions are primary and I cannot create any more partitions.I must've erred somewhere during the Ubuntu installation. Is it possible ti change the Extended partitions into logical, without affecting all the stuff within? Any ideas? Otherwise I will have to delete everything after Windows and install Ubuntu again, making sure that I create logical partitions in the Extended part
I used Acronis' Disk Director Suite 10.0 ["DDS"] to create 7 logical partitions of 23GB each, into one of which I asked Fedora 11 to install. Fedora 11 completely ignored me and created 2 primary partitions of its own: a 217.4GB, a 2GB and a 2GB "unallocated." I will likely delete this installation for a number of reasons. How can I force fedora to install into a 23GB logical partition that I created for just that purpose? If I can't use DDS-created partitions then why do I need DDS-created partitions?
I've installed Arch Linux onto my Western Digital SATA drive.I love it, best ever, however, I need the fglrx proprietry driver for better 3-d performace, and decided to create a new partition. I decided to install Linux Mint.Sadly, in all my noobishness, I forgot about the 4 primary partition limit (oops!) and as I have /, /home, swap, and /boot partitions (all primary) already installed, I have run into a bit of a problem.I resized my /home partition (almost 500GB) to about 225, and was then told I have over 200GB unusable space. Is it possible for me to change at least 1 of my primary partitions to logical partitions AND keep all the data intact (AND edit the arch configuration so that it'll still work) so I can install a second linux? I sincerely doubt it
I would like to install Ubuntu on an HP Laptop, but they have taken up the whole disk with 4 partitions. I have removed Linux partitions and made an extended one in it's place creating new UUIDs before, but i am worried that windows will not recognize the new partition.
I'm setting up my laptop to dual boot (default Vista installation and Ubuntu). There's also a possibility I may add XP later as a triple boot.
My laptop came with two partitions already, the second one labelled "Recovery". I was planning on adding three partitions, one for the Ubuntu installation, one for Swap, and one for storing my files (accessible to both OSs). However, this would be five partitions (or six, if I add XP later).
I've never had to deal with this many partitions before and just learned about the maximum of four primary partitions.
creating a new partition when i have only primary partition on my 40gb harddisk.
what i did while installation was selected use entire partition and now i want a additional partition other than primary ?
I want to assign 10GB for Primary one and wanna create Two 14GB partitions , I Also dont know what Swap partition Is.
Since i am a month old ( January 2011 ! ) UBUNTU user who hates MS Windows now, if i gets this problem solved , i can convince more people to replace their OS to Ubuntu .
What's the "Force to be primary partition" in Fedora partitioner? At least it doesn't work for me, it only uses primary partition using Fedora XFCE Live CD ( the only one that I checked that ).
I have F14 live on a USB stick and the PC boots fine from this.Now I want to install to the HDD but I need to get a handle on the existing partitions.I don't need too much space for linux, can I delete the 3rd and 4th partitions (D drive and EFI partition) and add my linux partition in this space?Investigation so far suggests that the EFI partition is not used and the D drive is empty.
right now I've been playing around with Ubuntu using Wubi and I would like to actually install Ubuntu onto its own partition. But I dont want to lose my Windows OS either (I need it for applications like MATLAB and LabVIEW).
My issue is, my laptop currently already has three primary partitions. One for windows, one for recovery and one "SYSTEM_DRV" (used to hold OEM windows license info apparently). I dont want to mess with any of those partitions. my question is, can I still install Ubuntu when I only have one primary partition?
I read about extended and logical partitions in the guide, but the wording was pretty confusing. All it said was Ubuntu needs two partitions, it didnt say if the partitions could be any type.
I have recently ghosted, using g4u, an 80 gig drive to a 30 gig drive. The data size is about 15 gig so no problem there.The system does work and it doing everything it should, except for some errors in dmsg log.The thing is though, that the system works! all the services are running and live.And i have years worth of customizations in this machine. Has been running for several years, so i dont just want to reformat and reinstall. Its hard to get linux the way you want it sometimes!So my question is this, is there a way to fix my partition or somehow tell the machine what the current boundries <i>should</i> be?
just got a new laptop with Windows 7 Home Premium 64bit pre-installed, and when I boot into my 11.04 CD, there is no simple option to install alongside windows 7. Only the options to erase the entire disk (wiping windows) or manually specifying partitions. I'd like to keep my windows install as I use it for gaming, but I don't want to mess around with partitions while I don't know what I'm doing. According to the 'Allocate disk space' part of the installation, all 4 primary partitions are being used, a main one for the Windows 7 install, one entitled HP tools, and another two I forget the names of. I have looked up that I may need to turn a primary partition into an extended one,
My motherboard on my old HP laptop died, so I bought a new machine that's running Windows 7.The machine is a Compaq (HP) and has a 250 Gig hard disk. I used Windows Disk Manager to shrink the space Windows is in so I can install Ubuntu in that space.When I start the partitioner it says the free space is unusable. I ran Gparted and sure enough, there are already 4 primary partitions on my drive:
/dev/sda1 = ntfs - SYSTEM /dev/sda2 = ntfs unallocated
I'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3 Log / ext3 Log swap swap Pri /media/X ext4 <- 2TB
Initially I had vista and redhat 9 due to some reasons i had to re instal my vista again.. since then the dual boot menu disappeared.. i tried to re install redhat and changing the boot configuration of redhat 9 but i am not getting both the OS back .. I am not aboe to boot linux redhat 9 .. please check the attached screenshots for details .. Vista is getting on fine but no redhat .. every time i try to fix the issue i get an error message "Unable to align partition properly..incorrect BIOS geometry .plz check the attached files.
i'm trying to install 98se to a 110gb partition so i can dual boot with ubuntu 10 for 98 and 100 for ubuntu after the resize. when i tried making multiple partitions manually for ubutnu putting it on separate partitions i got grub boot errors. the problem i am having every time i try to install 98 it forces me to scandisk it then i have to hit space bar to fix every error i thinks it finds wich is impossible to press it 2 million times. now if I format in a non 98 format and tell it to format in lba it keeps asking for a boot disc, i burned one off but, still kept asking for it. if i do it in non lba, it only saw 2 gigs in 98 and when i went to install ubuntu it was a giant hard drive no partitions. i did try making 3 fat 32s 1 for 98 and then swap and linux partition but, the i got grub errors 17 and 18.
the problem is that bios a cap of 130gb for each drive or in this case partition. it's 320gb WD blue Scorpio. the short i want to dual boot 98se and ubuntu 9.04 with 2 fat32 partitions for storage 110 +100 + 80 = 320 also some visuals.
I have installed oracle enterprise linux on VM ware with 20 gb allocated to guest OS. Now I want to install oracle apps in the guest Os, so I need to extend the volume. I have extended in Vm , but I have to partition in the guest OS, for that purpose I am using Gparted. But I am unable to extend to sda1. I need to have all the unallocation space allocated to sda1. Here is the screen shot, how can I do that. Right now when in press the command df -h in terminal I am gettig 18 gb as space available for sda1, I want to make it 200 gb, in which I would like to install oracle apps. Check out my screen shot.
Why is it faster to have more primary partitions when using Linux? Please give some real examples; I know some theoretical reasons but I don't understand them well.
I just got an Hp Pavillion laptop, and I'm trying to install Ubuntu. I resized the Windows 7 partition, and tried to install, but was unable because you can have no more than 4 primary partitions. Is there any way around this?
The current partitions are: Windows 7 ntfs file system BOOT RECOVERY HP_TOOLS
I have a laptop with Ubuntu 9.10 installed. It will not boot to the login screen. If I remove this HDD and connect it as a secondary drive to another PC running Ubuntu, will I be able to access the files on this HDD? There is a lot of data which I haven't backed up which I need to retreive. I don't think the hard drive has failed.
sda1 -> ext3 /boot 1023 cilinder sda2 -> swapp 2048 MB (i have 1024MB of RAM) sda3 -> ext3 /
GRUB tell me where to put MBR, and i have to choose beetween sda and sda1, which is the good choice and why? Is right to define the three partitions (also swapp) primary?
So I noticed while using guided partitioning that most distro installers will attempt to create a logical partition for the root file system besides the swap and /boot on the HDD. Why is this the case? Why does the partition for root file system have to be logical and not primary?
Around 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.