I'm using F15 and I have big problem. Sometimes GNOME-Shell is taking too much CPU, and my computer is slowing down. This is "top".
Code:
[kuba@Kuba-fedora ~]$ top
top - 16:08:18 up 2:05, 2 users, load average: 0.45, 0.49, 0.43
Tasks: 159 total, 3 running, 156 sleeping, 0 stopped, 0 zombie
Cpu(s): 29.2%us, 2.8%sy, 0.0%ni, 67.1%id, 0.5%wa, 0.0%hi, 0.4%si, 0.0%st
[Code].....
I have laptop with Mobility Radeon HD3200 graphics. Gnome 3 works more or less fine until I start Skype. When Skype is running switching between the windows is a pain in the a$$. The screen flickers, looks crappy, takes ages to refresh, etc. Anyone experience similar things? I also noticed that when I start yumex I also get the screen doing the same things as with Skype, but to a much lesser extent and only for a few seconds. Could it be related to the network connection? Running F15 64
View 4 Replies View Relatedis there some wiki page on GNOME or Fedora that list which graphics cards work without problems on Fedora 15 with GNOME Shell? I have tried 3 older cards and they all failed, so I would like to share this info with others so people know which cards to avoid if they want to use full features of GNOME 3 via GNOME Shell.
View 1 Replies View RelatedI am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
I need show the number of process per user, and after the date of the oldest process per user also.
With "ps -eo user | sort -u" i get all users that are running any process. And with "ps U username | wc -l" i get the number of process that the user "username" is running.
But how can i merge both commands for do what i need? Like a FOR or something like that. There is any method of make a FOR using the list that i get with the first command?
And then for show the date of the oldest process.. with "ps U username | sort -k 4" (4 is TIME field) i can show the process of the user "username" sorting they by time. But how can i get the date of the process takes longer running?? I can get only the time, but no the date.
Is there any easy way to do that in gnome shell with a key shortcut or setting it up like in gnome2 days with a hotspot?
ctrl + alt + d - should minimise all windows and focus the desktop - but it's not working for me?
How can i write a shell script that takes a file path as command-line arguments.and it should report whether the path denotes a file or a directory.
View 2 Replies View RelatedI feel like this is a RTFM question, so if anyone wants to just direct me to the right manual, that's fine.
I just installed gnome-shell and i cant seem to find anyway to customize anything, esp. the task bar, the clock, et cetera
is there a preferences gui or something that I cant find? I feel like i'm trying to use a mac....
It seems pretty sweet, but, i dont know how to get used to not having a window list... i dont wanna pull up the "activities window" or alt tab every time i want switch windows (esp when my hand is used to just moving to the top of the screen and clicking on the right window...
There's this autohide taskbar at the bottom of the screen, but i cant for the life of me figure out what it's for, or how to put things on it....
I see in Ubuntu 10.04 there is a PPA repository for latest gnome-shell, and it contains a newest version, the included in fedora 13 is older.
Is there a repository out there with the latest gnome-shell?
it's my first time using gnome-shell and i like it so much but i notice that i lost 'menu' button in nautilus and GIMP[URL]
View 3 Replies View RelatedJust did an update to gnome-shell.x86_64 3.0.2-1.fc15 and now the shell extensions don't work.
View 4 Replies View RelatedSeems many icon themes still don't really play nice with gnome shell. They work totally fine for the most part, except the tray icons, they like to change them to their own monochrome icons which usually look bad (and most of the time not even all of them are changed). Is there a way to make any icon theme use the default gnome shell symbolic icons? Right now I am using elementary and its mostly fine, but it changed the battery icon to an ugly smaller version. I'd love to be able to change it to the default icon.
View 4 Replies View RelatedI've been googling such terms as "Gnome Shell Developer Reference", etc, and poking around developer.gnome.org; and i can't seem to find documentation on how to code interface elements against the gnome shell for javascript / xHTML / css. Does anyone know where they keep it, or am i completely misunderstanding that aspect of the new gnome hell, in that you only use js to do themes, but not plugins or inteface changes?
View 3 Replies View RelatedSooner or later you may experience a Gnome shell lock up. After two weeks of daily use I experienced my first one today: the cursor turned to a hand, and no amount of clicking and pressing Esc would have any effect; Windows key didn't bring Activities in focus either. If you experience these or similar symptoms you can restart the gnome-shell in order to unlock the Gnome session:
1) pass to a console (press Ctrl+Alt+F2)
2) log in
3) execute: ps -ef | grep gnome-shell in order to find the gnome-shell process id (PID); the output may look something like
[Code]...
Pressing Ctrl+ALt+F1 (or, if that doesn't work -- Ctrl+ALt+F7) should take you back to the Gnome session. You should see the restarted gnome-shell. (You can now return to the console, log out from the console, and return to the Gnome session).
I'm looking for a feature in Gnome Shell that would allow me to tile all of the open windows on a desktop. Something akin to Fluxbox's ArrangeWindows keyboard shortcut. I know you can tile two windows side by side, but I would need something capable of tiling ALL of them. Does something like this exist, or would I need to look into writing a Gnome Shell extension?
View 4 Replies View RelatedI just want to be able to remove a couple programs listed in the menu if possible.
View 3 Replies View RelatedI updated last night and after a reboot I can get the GDM login but as my desktop loads it suddenly stops and complains of an error and won't load. If I load legacy Gnome desktop with Compiz it loads but ALL the lettering and words on the interface are messed up. By this I mean the letters are upside down and the words are spelt backwards. The mouse menus also work in reverse as in the menus themselves are also upside down and the highlighting moves from bottom to top as I move down the menu. Amusing but not what I want from my computer. There is nothing in /var/log/messages or /var/log/Xorg.0.log that would indicate anything is wrong.
I sooo don't want to have to rebuild, again, because of instabilities in F15 updates.
Is there any way I can switch my desktop shell from unity to, say, gnome-shell? I can switch using other console shell I like (bash, csh, fish, etc.). Assume that there is a stable alternative desktop shell, I should be able to choose, too.
(For console shell, we goes to /etc/passwd. But for desktop, I can't find the way to config.)
The installation was fine, after all the updates were done, I've installed Mesa-dri-experimental and then Gnome-shell.After I activated Gnome-Shell windows have some weird aspect (see image below )I've a acer 8930g laptop with a geforce 9600m gt.Do you have any Idea of what's wrong?I've also noticed that this problem disappear as soon I apply a theme with non rounded windows ( like Crux )
View 1 Replies View RelatedThis isn't the first time this has happened and it can get *very* frustrating but when I tried to install gimp today I got:
Code:
Error:
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
So I then did a quick
Code:
Is there something I am overlooking here or is the GIMP installation (in)correctly asking for misnamed dependencies? If so, is there a way to report this to the RPM repo to ensure it is corrected quickly?
How do I resolve the transaction check error?
View 9 Replies View RelatedI am running Fedora 14 on my Thinkpad T410. Tried to see what Gnome 3 shell looks like. So I went to: System->Preferences->Desktop Effects and chose GNOME Shell. Now the bottom and the top pannels are gone. I can see only the desctop and the icons on it. How can I get back to the previous settings? I tried and tried without any luck.
View 3 Replies View Relatedany chance, in Fedora 15, to remove the username and the related menu from the top right corner of gnome shell? I don't use IM of any sort, i'm not always connected and I don't like a menu remembering me my name and my availability status...
View 14 Replies View RelatedI am trying to theme my Gnome Shell experience, and I have little complaints for the Shell Theme/GTK3 side of things. However, even though there are GTK2 files included in the packages, my GTK2 apps are theme-wise broken. The colors are not on par and the buttons are not round as the theme should say, as it's still supposed to work since the files are provided.
View 1 Replies View RelatedGedit windows don't aerosnap left or right. They do upwards (to maximize).
Fedora 15, Gnome Shell, enjoying it.
A classical case for "aerosnapping" two windows side by side, in my experience, is a terminal on one side and a HOWTO in gedit on the other side. This allows easy copy and paste.
Anyway, a gedit window doesn't aerosnap left and right (it only heeds to aerosnapping on the top, for maximizing its window).
I am running Ubuntu 10.04 Lucid, and it works perfectly.However, since last week (probably after some update), the gnome menu bar takes much longer to appear when I login. After it appears, it works just fine.To clarify, I turn on the system, login, the desktop background image and icons appear, and only after about 30 seconds the upper and lower gnome menu bars appear (a week ago all of it loaded almost instantly).
View 1 Replies View RelatedNot sure if others have noticed this. When I go into sound settings, click the output tab, select the sound device I want to edit and change the bass levels etc, close the window and go back in all the settings are reset to default and no changes are saved.
If I leave the window open and make the changes they are reflected in VLC for example, but if I close the window it again resets to defaults and my Bass is back at Maximum....
Is this a BUG I should report or is there something I can download to get this configured elsewhere or to fix this issue? I seem to recall something similar in Fedora 14 that was fixed, but I cant remember how I did it now
I'm going to play w/ OpenCL on Fedora 15. I instaled their (AMD) SDK, and need to install their ICD driver. But I heard, that there are problems w/ AMD proprietary video driver with Gnome 3 shell. Does anyone have an experience with this configuration?My machine has Phenom II and ATI 4750 video.
View 2 Replies View RelatedGnome-keyboard-applet takes 16MB or RAM. This is million times the total amount of memory my first computer had. It included the whole operating system and a graphical file manager in 1/1000000th of what gnome-keyboard-applet takes!
gnome-netstatus-applet takes the same room!
I installed ubuntu 10.04. After logging in,it's taking time to load the gnome menus.
View 1 Replies View Related