I recently decided to try KDE4 and would like the change the clock on the panel to display 12 hour format and not the default 24hour format but i can not find where to change this option currently the clock looks like the attached picture. Gnome has this option and I would like to see it in KDE if it exists in the default clock. I am willing to replace the default KDE clock with a seperate widget if one exists for this.
I need to change the time displayed in the task bar from a 24 hour clock to a 12 hour format. I could not find the relevant settings in OpenSuse 11.2 and same is the case for 11.3 as well.
how to make the change? I have tried System Settings ---> Computer Administration ---> Date & Time; but I was not able to make the desired change.
Similarly, I have a digital clock widget that shows GMT + 5.5 hours and I need to change that to 12 hour format as well.
I just switched over to Lubuntu, and so far, it's been great.It's rendering quite well with my laptop, even though the fan is constantly running.I've had some small annoyances that I haven't been able to figure out. How do I get the power button and/or other related actions to the 'start' menu? Is there a way to drag and drop applets like in Ubuntu? How do I setup default brightness like in Ubuntu? How do I change the time to normal US time (12 hour instead of 24 hour)How do I change the time to a 12-hour instead of 24-hour?Is there a software center?
I wish to run a cron job every half hour, where exactly do I put the job? The reason I am asking is that I am used to entering jobs into crontab, I am not used to using fedora and its cron layout.
I'm running a fully updated Fedora 15.In Evolution's calendar, my days are limited to 12 hours: from 0:00 to 11:45, always.Under preferences->Calendar and Tasks->General, I have "day begins" as 07:00, and "day ends" as 23:30. Changing these numbers has no effect whatsoever. Selecting "12 hour" under "time format" also does nothing.I REALLY hope this isn't a deliberate change by the Evolution developers. My days have normally consisted of more than 12 hours since I was three or four (I'd have to call my parents to ask). Jokes aside, what's going on and how do I change this?
I found (Red Hat Fedora Core 6 Server) a CRON entry for "backupmng" that has repeats at 1,16,31 and 46 minutes every hour of every day, 24/7.It is located at:/usr/local/psa/admin/sbin/backupmng >/dev/null 2>&1.
I'm experiencing a problem with cron.hourly running mcelog.cron on Fedora 11:Quote:mcelog: warning: 18446744073709551600 bytes ignored in each recordmcelog: consider an updateI've read a dead end email thread here from February 2010 describing what I am seeing on Fedora here:Does anyone have any insight into this problem? This is relevant portion of strace(1)ing mcelog which shows /dev/mcelog is open()d and configured correctly:Quote:
How to backup in such way that, data will be backed up in every 1 hour...but every time not full data;; only the data/file which have been modified within last 1 hour. Its on locally. And how to back up local data to remote system. Because I have tried with ssh-keygen also , but everytime its requiring password.
Fresh 12 install. I did a yum install yum-fastestmirror and it took over 30 minutes to download its database, at a speed of 5-9 KB/s. Drove me nuts to wait 30 minutes to download a 60Kb program. Then after the install of fastest-mirror, I thought I was out of the woods, and launched a YUM UPDATE, and its still downloading fedora/filelists_db at 13KB/s. Estimated to take over 20 minutes. After that, it will be downloading the 500MB of stuff - hopefully at a better rate. Sigh!! No way to speed this up?
I had an aging RH 7.3 server that I decided was time to upgrade the hardware and software as well. I chose Fedora 13.This server runs an ircd with several bots connected to it. The bot in question is a perl bot based on the old dreambot script. On the RH 7.3 server, it ran forever. On the new Fedora 13 server, it does an EOF and restarts every hour, exactly one hour after it's been started.Is there something limiting the time that a perl script can execute?
I have a python script that I would like to run every hour regardless of whether I am logged in. I have tried putting a link to the script in cron.hourly, however, it does not run.
why did i have every time a black screen after 1 hour and can do nothing any more. But the music that play with rhytmbox is playing good.No energy saving only screen saver that must be active after 10 min non activitie on pc
Yesterday I configured an NTP Server, and synched a sever with my NTP Server. Now some how my Client clock jumped one hour ahead at 12:00 AM, while HW Clock and NTP Server Clock remained.
Code: cat /etc/sysconfig/clock # The ZONE parameter is only evaluated by system-config-date. # The timezone of the system is defined by the contents of /etc/localtime. ZONE="Asia/Karachi"
I need to build a system that can provide me capacity to send more than 50.000 mails per hour. Now I have inherit a server farm with 40 postfix servers, and one server managing which of this servers send the mails but its programming for someone but it's too complex. I would like to have a new system for do that, (To manage hotmails, Yahoo and others complains i have a contract with a specialist company to have ours ips in whitelist, activate and deactivate servers )
Do you like programming? Can you take challenges? Would you match yourself with others? Here is your chance! Grab it! The jubilee X. BME International 24-hour Programming Contest will be held this year in May!
This contest is a real test of creativity, knowledge, endurance and team-work, an EXTREME CHALLENGE! Sponsors and the offered prizes worth 6000 euros contribute to the high standards of the contest. The team which gaines the utmost points can take home the award and the cup.[URL]..
My internet disconnect mabe every second hour and I have to restart the Ubuntu to get internet again. This started to happen when I bought a new wireless card called NETGEAR WG311v3. The live CD didnt have the drivers for it so I had to download XP drivers and install it with ndisrwapper.
So my question is how do I fix it? Do other network drivers crash with my current one? If so how can I see wish one to remove?
Note that my card works fine with XP on same computer.
Installed Lucid netbook-remix on my Aspire One with SSD and 3 cell battery last night. Under 9.10 I got 2hr 15mins with wifi and up to 3hr without wifi. This morning on the train to work I booted the new release only to find that without wifi I'm now getting only 1hr 20mins battery life (fully charged battery). I have the brightness turned down low to try and save a little power but it makes no difference. What can I do. As this is a netbook-remix release having just over an hour of battery life is plain awful and impractical.Any suggestions to increase battery life?
Recently moved into amazon's ec2 cloud and noticed our server time was in UTC where we use EST. I did some looking around, and changed using the following;
Followed up setting the correct time using the date command with the correct time, then date showed;
Now, that is correct, but if I do an ntpdate pool.time.org or any other time server, the offset is huge and the date moves back one hour. Is this a daylight settings or something I am just missing?
i have file server 1 (filesvr01acess.log) and disc server 1 (discsvr01acess.log) in unix box(say ip adress of the box 10.39.66.81) Similiarly i have file server 2 (filesvr01acess.log) and disc server 2(discsvr01acess.log) in unix box(say ip adress of the box 10.39.66.82). Now my requirement is write sheel script for ..
1. I need only last 24 hour data out of the file server 1 and file server 2 and then finaly put this data in one new file
2. Similiarly same need for discserver 1 and discserver 2.
FYI, each .log files mentioned above is nicely order as date and time as it is created. I can view through cat or search by using grep comand in unix I am wondering if we can achieve through grep command in unix
I was wondering if any one came across that issue before. Everytime I reboot my PC something (I assume GNOME) reset my system clock to an hour behind what is was the last time. So if a reboot twice in a row that'll be two hours behind and so on. It used to work fine until I had to change my system time backward temporally to overcome and issue with GPG. Since I put it back I get that phenomena. It's like it's adjusting it for the Day light saving everytime a boot. Problem is Japan does not have any day light saving. I run OpenSuse 11.2 with Gnome 2.28.2 as my interface. I'm currently located in Japan GMT+9 not DST. /etc/localtime -> /usr/share/zoneinfo/Asia/Tokyo
I suspect a bug in Gnome or Yast. It's not user specific because the time is already altered even before I log it.