Ubuntu :: KUbuntu 10.04 Installs Fine, But Hangs On Next Boot?
Jul 5, 2010
coming from the Windows world recently decided to give Linux a try and with it, she decided to go with KUbuntu. I had her go at it under VMWare so she could have something to fall back on while learning Linux. Problem is after installing KUbuntu we can no longer get back into it as the system locks up while it is trying to boot. All that is seen on the screen is the KUbuntu bootup logo screen and it stays there.
View 1 Replies
ADVERTISEMENT
May 1, 2011
I made a post in http://ubuntuforums.org/showthread.php?p=10753227 but I guess it's closed.I'm having the same issue. I've installed Kubuntu 11.04 32bit twice now. Both times it doesn't do anything when it reboots.No output to the screen.When I boot to the LiveCD and chroot or simply mount the /dev/sda device and run sudo grub-install --root-directory=/mnt /dev/sdaIt says grub installs successfully, but it doesn't fix the problem.
View 1 Replies
View Related
Feb 15, 2010
OpenSuse and rpm. Been using Debian for 7 years, so be gentle. I upgrade KDE 4.3.1 to 4.3.5 through the one-click install. After confirming some actions due to dependencies the install runs and in the end it said it failed to install a bunch of packages. These packages installed just fine and everything works as it should.
I was wondering if this happens more often, as it makes me kinda nervous if the installer warns me? Perhaps even more if it warns about things that aren't correct.
View 5 Replies
View Related
Mar 26, 2009
I recently installed fedora 9. Everything works fine after install (except sound but thats a different story). When i run updates everything seems to have worked fine but when i reboot afterwards i get to the login screen which works but as soon as i log in it freezes? the only way to restart is to press the power switch...
View 5 Replies
View Related
Feb 25, 2010
I've just installed Karmic 9.10 to a new 500GB sata in a friends PC and it boots and runs fine; internet and everything just works. Just reinstalled XP-SP3 to old 80GB pata drive in same PC, it boots ok, but has no sound, poor graphics and network is limited to 1394 - no ethernet.
I built this PC about 3 years ago and it had been running XP with SP2 then SP3 installed, and everything worked fine. So over the past day I have installed XP-SP3 (slipstreamed disc) in it 3 times now, then went back and tried XP-SP2 (earlier slipstreamed disc) twice with same result - no ethernet, poor graphics, no sound?
But it all works fine in Karmic?
I ran Karmic's disk utilities (Palimsest) on the old 80GB and it tested fine, no problems at all.
PC comprises Gigabyte M55plus-S3G m/board, AMD 3800+ 2.4Ghz CPU, 1 GB RAM and a 64MB NVidia graphics card (can't recall model)
Is it possible MS built 'crippleware' in to XP, or could there be a hardware problem that Karmic didn't detect (doubt it)
Karmic is going to be the main OS now, so I don't think the loss of XP is a problem, but friend still wanted to be able to boot XP, even though XP is installed in Virtualbox in Karmic (I did this by importing a previously saved XP 'appliance').
View 1 Replies
View Related
May 24, 2011
so the problem is that when I try to install anything with Software Center I get this error
Code:
installArchives() failed: Selecting previously deselected package alarm-clock-applet.
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading
[code]....
View 3 Replies
View Related
Jan 4, 2010
I'm trying to install opensuse using the internet install feature. After the loading linux kernel screen, I see a black screen with a lot of commands/steps. It keeps hanging at the line: [2.202543] [<c0804db73>] kernel_thread_helper+0x7/0x10And at the same time, caps-lock and scroll lock lights on my keyboard are blinking. What does this mean? what i see is this:
Code:
[2.121594] VFS: cannot open root device "<null>" or unknown-block (3,1)
[2.121873] please append a correct "root"= boot option; here are the available options:
[code]....
View 9 Replies
View Related
Mar 28, 2011
I have an old averatec machine (3200 series) Slackware 12.2 is working fine out of the box (13.1 is not even booting after installing, so i decided not to work in this direction) except for the wireless. the wireless is working some seconds after putting the interface up, later stops working, and if you mess around a little with the interface, the computer will hang (caps and num lock will flash and thats all) I tried diffferents kdrivers (right now i downloaded the latest linuxwireless and im using those drivers) same situation. was working fine with kernel 2.24 and old drivers (the iface wass called ra0, right now is wlan0) I know this is not much information, but i will try to get another pc to make a ssh and beeing able to get some traces.
View 5 Replies
View Related
Nov 10, 2010
I have more than a dozen servers running CentOS (mostly supermicro servers) everytime i do mkfs.ext3 or mkfs.ext4, it always hangs the server (nothing is responding, not even the terminal) can't even do Ctrl+C to kill it. but the funny thing is, if i leave it on for hours, it'll finish eventually.
this puzzles me, i've tried so many different SATA drives and different servers, different kernels, different CentOS. for example purposes, my CentOS 5.3 runs 2.6.18-92.1.13.el5 kernel. i also have 5.4 and 5.5. mkfs.ext3 works fine on SAS, but always hangs on SATA. here's where it usually hangs Writing inode tables: 2126/7453
View 5 Replies
View Related
Mar 31, 2010
XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10
Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?
View 4 Replies
View Related
Jan 5, 2011
Basically i run Kubuntu 10.10 without much trouble but then after a bit it hangs, it goes slow, it just misbehaves...now i checked top in order to see if something was going wrong but nothing looks odd...it seems to happen mostly after i used Google Chrome (not chromium)...but even if thats killed, it still misbehaves...it also does this if i have just plugged in my headphones....its strange.
View 4 Replies
View Related
Feb 2, 2010
I installed kubuntu 10.4 with dual boot. Initially it worked fine but after 2 days it started hanging after the login screen.
View 5 Replies
View Related
Jul 31, 2010
I can get to a terminal with it in this state and use a ps aux [pipe] grep acpi and kill processes but how do I get it to resume booting after this? Typing startx doesn't work as xserver is already running on screen zero displaying the never-ending loading screen.
View 1 Replies
View Related
Feb 3, 2010
Distribution = Oracle Unbreakable Linux 5.4 x86_64Machine = HP DL180 2U ServerModifications = LSI SAS/SATA PCIExpress CardSo I plop 5.4 on this box, and install goes great, but then when I try to reboot the machine ('install is complete, click to reboot'), it won't go... post completes, fibre card and sas card get done with their posts, and then it just craps out when you'd expect it to start loading the OS.So I thought the card was bad... stuck the horrendous HP Storageworks PCIExpress SAS card back into it and had the same behavior, good install, but boot failure.
Bios is set to defer to the PCI card for boot priority -- first bios boot device is the DVD drive, then it defers to the card. With the LSI, I had chosen physical drive 0 (1st one) to boot. With the HP Storageworks, you can't boot physical drives, so I just made a logical drive from one physical drive and went that route... same behavior
View 5 Replies
View Related
Apr 22, 2010
Just received Intramfs update, within the hour (4/22/10 11:47 central) , installs correctly on a new 10.04 install but now machine cannot bootIt is somehow resetting the video it appears as the boot screen comes up in different (larger) type. then blanks and all activity stops,, I have been having similar problems if I apply all updates after an initial install of 10.04 but if I hold the opne gl modules the system will work but a backup taken with Remastersys made after the open GL installs will not work while the one made prior to the open GL install will restore the system so I'm guessing some sort of erroneous HW reset sequence
View 1 Replies
View Related
May 19, 2010
Recently I have built an old pc using bits and bobs that have been collecting in the garage for years and decided to try and turn it into a file server, and to get some experience in networking etc. Now I had a choice of 2 motherboards for the system:
1.)gigabyte ga-8siml
2.)elitegroup l7s7a2
I first built the pc using the gigabyte board,install was successful and ubuntu server booted on restart. The only problem was,there is no onboard lan on the board and the only spare wireless pci card I found was completely frazzled. Rather than buying a new wifi card to get the system running, I thought I would try the other motherboard since this had onboard lan. The elitegroup motherboard however does not have onboard vga, so I dug out an old agp ati radeon 9200se 128m ddr tvo graphics card and plugged her in. The install went fine,but after a restart, I'm left with a blinking cursor at the top left of the screen.
If I hold down 'shift' for long enough I can bring up the grub menu,but if I select anything I get no signal on the monitor. After a while on the blinking cursor screen the monitor will time out to no signal on its own. I have tried the installation using different combinations of the options given by F6 of the first installation screen but to no avail. I have also tried installing the generic kernel as opposed to the generic-pae.
View 4 Replies
View Related
Apr 21, 2009
I am having a problem getting F10 to boot after install.I downloaded the DVD, burned it and installed from it. No errors during the installation but when I go to reboot the system comes up saying:"VolGroup00 not foundUnable to access resume device (/dev/volgroup00/logvol01)Mount: error mounting /dev/root/ on /sysroot as ext3:h file or directory"This is being installed into an AMD Opteron Blade with an Adaptec SC2000 controller card, 4 SCSI disks configured in a RAID 5 array.I gather it's looking at the wrong device for a boot track/loader, but not sure how to fix thisAny ideas? I figured if it found it during install it should find it during boot but that doesn't seem to be the case
View 14 Replies
View Related
Jun 20, 2009
upgraded from Fedora 10 to 11, had both KDE and Gnome desktops installed under 10 but now upgraded to 11 I get a boot error when truing to boot to KDE and most KDE apps that used to run under Gnome no longer do so
View 1 Replies
View Related
May 24, 2009
Since puppy installs in ram, unstead of on harddrive, does that mean you could not use that computer as a dual boot one? I mean won't puppy always be wanting to run on boot up, since it's not on a seperate partitian ?
View 5 Replies
View Related
Apr 16, 2011
In the end, I am trying to dual boot my MacBook Pro with Fedora 14 and OSX. I am having issues getting the bootloader working for Fedora though. I have setup my partition table like this:
/sda1 - EFI
/sda2 - OSX
/sda3 - /boot
/sda4 - LVM (root, home, swap)
Fedora installs fine, and the bootloader installs to sda3. I use rEFIt to allow me to boot to my Linux partition, but when I do I get "no bootable device". I have done a little reading and have found people have problems doing with this with GRUB (default Fedora bootloader). So what I would like to do is try installing LILO or maybe even GRUB2. how to change the bootloader Fedora installs from the Live CD?
View 1 Replies
View Related
Jan 1, 2011
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
View 2 Replies
View Related
Nov 8, 2010
I'm running Kubuntu with KDE 4.5.3 and noticed that if I don't have any chat windows open and kopete minimized to the message indicator, it will appear to "hang" and log out all of my accounts. I sometimes have to do a killall from the command line or restart it. If I keep at least one chat window open on the desktop of the main Kopete window open, I never have any problems.
My Google-Fu hasn't turned up anything so I thought I'd check if anyone else has had this type of problem?
View 8 Replies
View Related
Jul 29, 2010
Today when I turned my laptop on it went to the bios like normal, and after that all I saw was a cursor.I am able to boot into a live CD and view my files on my hard driveim using Lucid Lynx. and there was a kernel update kind of recently that required a restart but i didnt do that immediately.
View 4 Replies
View Related
Sep 17, 2010
Trying a LiveCD of 9.04 and it wont boot on iMac 8,1 with Intel CoreDuo2. Using rEFIt or not doesn't help, boot to cd gives a black screen with overlength cursor and takes no keyboard input (CAPS light wont even come on). No splash screen or chance to get a prompt. md5 check of cd against iso file using dd is fine and matches published md5. Tried alternative (text) cd iso and same story. Tried Bootcamp for the initial partitioning and no difference. Mac installation cd boots fine as does OSX, burned cd from multiple machines and no joy. Graphics is an ATI Radeon HD2400. Mac running OSX 10.5.8
View 5 Replies
View Related
Feb 14, 2011
I have an Acer Aspire One AOA110 (SSD version that came w/ Linpus Lite) that my brother gave to me several months back when it stopped working. I've been trying various ways to revive it or make it useable, but haven't had any luck so I figure it's time to look to the community for ideas. I have already updated the BIOS to the latest (v3310) version, so I don't think it's the common issue these netbooks have where they don't even post. I'm kind of thinking the GPU died halfway or something. If I could just get it to work in a command line only mode, I'd be happy.
The netbook will post fine, but when I try to boot into Linux, the screen will go blank part way through the boot process. I don't ever remember hearing sound afterwards so I don't know if just the screen is blank or if the computer is locked up as well. I have tried several distros, but all of them seem to run into the same issue. Some with text based installers (Debian) get all the way through the install, but won't get all the way through the boot process. I'm only trying to get to a command line, not into X or anything graphical. Arch Linux also uses a text based installer, but I couldn't even get into the installer before the screen goes blank. I've tried changing some of the kernel options such as nomodeset, vesa and framebuffers options, but didn't have much luck with them either. I've also tried some older versions of Ubuntu (I think back to either 8.04 or 8.10) and tried the text installs, but I can't remember if I couldn't get into the installer or if I just couldn't boot, I want to say I couldn't even install. Mind you it's not random, it's always at the same point for a particular distro.
So the other small twist to this all is that FreeDOS works fine, besides not being able to get the sound card or network card working. I can play games, set different resolutions in ZSNES, etc. This seems a little odd to me, but I'm hoping it makes perfect sense to someone reading this.
I want to be able to run Linux with a command line interface, but I can't find the right distro/settings/whatever that it stays in the video mode (vesa?/framebuffer only?/I'm not even sure what to search for) where I keep the display and get to a command line. Any thoughts on what's happening when the screen goes blank or what I can do to get Linux working on here again?
View 4 Replies
View Related
Nov 24, 2010
This started a few days ago and I checked back through recently installed packages and nothing looks related. If I boot into ubuntu normally, plymouth looks a mess, but then things boot fine but while the mouse is showing and ubuntu goes about with connecting to networks and so on, but it doesn't register the and input from the mouse or keyboard. It will sleep if you press the power button, but its no more responsive after waking up.
If I boot into recovery mode, and use the failsafe graphics option then everything runs fine. Apart from 3D graphics being pretty slow, which I can kind of understand. I get the same behaviour on all of the last three kernels. I'm running the latest maverick on an HP 6715b. i386 version although the processor is 64 bit compatible. 2Gb RAM.
View 1 Replies
View Related
Nov 25, 2010
To start off, I am about 3 days into my new ubuntu operating system. I am a complete newbie, but i have picked up alot in the last couple days. My sound was previously working, but the microphone was glitching when using skype. After running a bunch of different commands in terminal that were posted on forums from all over the internet, I rebooted my computer to find no sound. I have searched the forums again and tried many different command lines in terminal to no avail. My system setup is found here: [URL]
View 7 Replies
View Related
Nov 2, 2010
I'm trying to install 10.10 to HP nw8440, it boot's from cd, installs and don't start's, just showing me "No such partition" error.Partitions on my laptop are:
Code:
sda1 -> Win7 Bootloader
sda2 -> Win7
[code]....
View 1 Replies
View Related
May 25, 2010
I'm running Ubuntu 10.04 and a small Windows 7 partition (cuz I can't get Ubuntu to run my MSI TV@nywhere plus card but that's another issue).I can log into Windows fine. If I choose Ubuntu, however, the boot process will go thru a few screen flickers. Then one of two things happens:1) I get a scrambled up pixelated image (not sure what it is) for about 3 second, then it goes into the login screen and I can log in normally.2) I get the scrambled up pixelated image and it hangs. This happens about 4 times out of 5 when rebooting.
I do have an nVidia card and a beta driver (they published it the 21st, I believe, of this month) but this happened long before that. It's happened ever since I installed any of the drivers (I've tried a couple different versions, hoping to fix this) for my card.
My system is a frankenputer:
Phenom II quad core 3.0 cpu
nVidia GeForce BFG 6600
4G DDR3
500G drive
Note: I do have 3D rendering when I finally get into the desktop. Everything works great, except that when I'm playing my mmorpg, Regnum Online, it freezes the entire computer and I have to reboot (not sure if that has anything to do with it or not).In case it's needed, this is my grub:(Second note: I'm sorry for the length of the post but I don't know how to upload documents/files to show)
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[code]...
View 1 Replies
View Related
Aug 28, 2010
When I boot up my laptop whith memorycards in the slots the boot hangs at "Wating for /dev to be fully populated", "Activating swap" or somewhere in between.If I take out the memorycards so the slots are empty, the laptop boots just fine...Its a CFCard and a SDcard in a PCIMAslot.Does anyone have a clue?Its not a big problem just very annoing to have to take out the memcards all the the time.
View 4 Replies
View Related
