Fedora Installation :: F10 Installs But Will Not Boot?
Apr 21, 2009
I am having a problem getting F10 to boot after install.I downloaded the DVD, burned it and installed from it. No errors during the installation but when I go to reboot the system comes up saying:"VolGroup00 not foundUnable to access resume device (/dev/volgroup00/logvol01)Mount: error mounting /dev/root/ on /sysroot as ext3:h file or directory"This is being installed into an AMD Opteron Blade with an Adaptec SC2000 controller card, 4 SCSI disks configured in a RAID 5 array.I gather it's looking at the wrong device for a boot track/loader, but not sure how to fix thisAny ideas? I figured if it found it during install it should find it during boot but that doesn't seem to be the case
View 14 Replies
ADVERTISEMENT
Jun 20, 2009
upgraded from Fedora 10 to 11, had both KDE and Gnome desktops installed under 10 but now upgraded to 11 I get a boot error when truing to boot to KDE and most KDE apps that used to run under Gnome no longer do so
View 1 Replies
View Related
May 19, 2010
Recently I have built an old pc using bits and bobs that have been collecting in the garage for years and decided to try and turn it into a file server, and to get some experience in networking etc. Now I had a choice of 2 motherboards for the system:
1.)gigabyte ga-8siml
2.)elitegroup l7s7a2
I first built the pc using the gigabyte board,install was successful and ubuntu server booted on restart. The only problem was,there is no onboard lan on the board and the only spare wireless pci card I found was completely frazzled. Rather than buying a new wifi card to get the system running, I thought I would try the other motherboard since this had onboard lan. The elitegroup motherboard however does not have onboard vga, so I dug out an old agp ati radeon 9200se 128m ddr tvo graphics card and plugged her in. The install went fine,but after a restart, I'm left with a blinking cursor at the top left of the screen.
If I hold down 'shift' for long enough I can bring up the grub menu,but if I select anything I get no signal on the monitor. After a while on the blinking cursor screen the monitor will time out to no signal on its own. I have tried the installation using different combinations of the options given by F6 of the first installation screen but to no avail. I have also tried installing the generic kernel as opposed to the generic-pae.
View 4 Replies
View Related
May 1, 2011
I made a post in http://ubuntuforums.org/showthread.php?p=10753227 but I guess it's closed.I'm having the same issue. I've installed Kubuntu 11.04 32bit twice now. Both times it doesn't do anything when it reboots.No output to the screen.When I boot to the LiveCD and chroot or simply mount the /dev/sda device and run sudo grub-install --root-directory=/mnt /dev/sdaIt says grub installs successfully, but it doesn't fix the problem.
View 1 Replies
View Related
Jan 1, 2011
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
View 2 Replies
View Related
Apr 16, 2011
In the end, I am trying to dual boot my MacBook Pro with Fedora 14 and OSX. I am having issues getting the bootloader working for Fedora though. I have setup my partition table like this:
/sda1 - EFI
/sda2 - OSX
/sda3 - /boot
/sda4 - LVM (root, home, swap)
Fedora installs fine, and the bootloader installs to sda3. I use rEFIt to allow me to boot to my Linux partition, but when I do I get "no bootable device". I have done a little reading and have found people have problems doing with this with GRUB (default Fedora bootloader). So what I would like to do is try installing LILO or maybe even GRUB2. how to change the bootloader Fedora installs from the Live CD?
View 1 Replies
View Related
Aug 27, 2009
I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.
Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?
View 7 Replies
View Related
Jun 3, 2010
I am trying to install Fedora 13 on a new system from CD. DISK 1 runs but terminates without using disks 2-5. There is a system I can access as 'root' but I was not prompted to create a unique user or which packages should be installed.How do I complete the process?
View 1 Replies
View Related
Mar 26, 2009
I recently installed fedora 9. Everything works fine after install (except sound but thats a different story). When i run updates everything seems to have worked fine but when i reboot afterwards i get to the login screen which works but as soon as i log in it freezes? the only way to restart is to press the power switch...
View 5 Replies
View Related
Mar 31, 2010
I just did an upgrade and it included the kernel. As time goes by, I will be stuck with a lot of kernels to choose from, and lower disk space. How do I remove an older kernel and everything it's related to it without breaking stuff?
View 8 Replies
View Related
Jul 15, 2009
I'm having trouble installing Fedora 11 using the URL method. When I put in a F11 netinstall CD, or even Disc 1, I press tab on the first option and add "askmethod" to the end of the text. Each time I point the installer to my local FTP and press enter after typing in the FTP url, the installer just hangs there. I've even tried deleting ALL the files from the F11 folder on my FTP server and downloaded ALL the files at:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Still...the same thing.
When I pointed the installer to:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Everything worked fine, albeit slow as it was DL from the NCSU FTP server.
Am I doing something wrong with my FTP server? It is anon, so there is no authentication issues.
View 5 Replies
View Related
Nov 2, 2010
I'm trying to install 10.10 to HP nw8440, it boot's from cd, installs and don't start's, just showing me "No such partition" error.Partitions on my laptop are:
Code:
sda1 -> Win7 Bootloader
sda2 -> Win7
[code]....
View 1 Replies
View Related
Feb 3, 2010
Distribution = Oracle Unbreakable Linux 5.4 x86_64Machine = HP DL180 2U ServerModifications = LSI SAS/SATA PCIExpress CardSo I plop 5.4 on this box, and install goes great, but then when I try to reboot the machine ('install is complete, click to reboot'), it won't go... post completes, fibre card and sas card get done with their posts, and then it just craps out when you'd expect it to start loading the OS.So I thought the card was bad... stuck the horrendous HP Storageworks PCIExpress SAS card back into it and had the same behavior, good install, but boot failure.
Bios is set to defer to the PCI card for boot priority -- first bios boot device is the DVD drive, then it defers to the card. With the LSI, I had chosen physical drive 0 (1st one) to boot. With the HP Storageworks, you can't boot physical drives, so I just made a logical drive from one physical drive and went that route... same behavior
View 5 Replies
View Related
Apr 22, 2010
Just received Intramfs update, within the hour (4/22/10 11:47 central) , installs correctly on a new 10.04 install but now machine cannot bootIt is somehow resetting the video it appears as the boot screen comes up in different (larger) type. then blanks and all activity stops,, I have been having similar problems if I apply all updates after an initial install of 10.04 but if I hold the opne gl modules the system will work but a backup taken with Remastersys made after the open GL installs will not work while the one made prior to the open GL install will restore the system so I'm guessing some sort of erroneous HW reset sequence
View 1 Replies
View Related
Jul 5, 2010
coming from the Windows world recently decided to give Linux a try and with it, she decided to go with KUbuntu. I had her go at it under VMWare so she could have something to fall back on while learning Linux. Problem is after installing KUbuntu we can no longer get back into it as the system locks up while it is trying to boot. All that is seen on the screen is the KUbuntu bootup logo screen and it stays there.
View 1 Replies
View Related
May 24, 2009
Since puppy installs in ram, unstead of on harddrive, does that mean you could not use that computer as a dual boot one? I mean won't puppy always be wanting to run on boot up, since it's not on a seperate partitian ?
View 5 Replies
View Related
Feb 25, 2010
I have tried many things but none of which seem to work.
Motherboard : N2PAP-LITE
Processor : AMD SEMPRON 2800+ (32 Bit)
Stock FSB Settings : 166/333MHz
Chipset : NVIDIA NFORCE2
This is a really odd problem. It installs under 133/266MHz and runs fine. When it's at 133/266 it reconizes it as AMD ATHLON XP in the BIOS and the Linux Installation. I want to be able to install it using 166/333MHz which is the stock setting of the processor! When I set it to that in the BIOS it reconizes as a AMD SEMPRON 2800+ but will not install Ubuntu 9.10.
This is the error I get if I try to run it from the CD, Install it, or boot from the current installation which I installed it with 133/266MHz. If anyone can please help me figure this out it would be great, im trying to use it as a server and would not like to bottleneck it as it shouldn't be. I get these errors
Code:
check_bugs+0xbb/0xe9
start_kernel+0x2dc/0x2ec
? unknown_bootoption+0x0/0x1ab
i386_start_kernel+0x7c/0x83
Now if you want the whole error list I will type it up.This is a link for the motherboard manual.
[URL]
View 9 Replies
View Related
May 29, 2010
I burnt a 10.04 LTS disc when it was released and just tried installing on an old Pentium 2 400 MHz with 320 MB and two 10 GB drives. After rebooting, it comes up in text mode with a tty2 login. Did this install the server version only? Is there a command to launch the GUI shell? There were no options during the install to choose GUI or server version and I assumed this was the 32-bit GUI version and the install disc ran we GUI during installation.
View 4 Replies
View Related
May 11, 2010
I'm planning to have two installs on the same pc, so I can break / test one and still have a usable system. I've got my partitions setup so I have a separate /home for both installs to share, but how do I share the updates? I'm going to use clonezilla to copy the working (/) partition, but how can I use the updates for both installs. I'm just trying to save downloading twice if possible. Is there a way to copy or use the updates applied in one partition to the other? Does apt save the updates somewhere?
View 1 Replies
View Related
Nov 15, 2010
I've been installing Ubuntu on more and more systems for people. But I'm just doing the install from the the LiveCD download on the Ubuntu homepage. Once I do the install people want their desktop to look like mine so then I have to install Compiz and Cairo-dock and configure them both like mine. Is there a way to create a LiveCD or installation disk already pre-loaded and configured with Cairo-dock and Compiz. I'd also take off F-Spot and add digiKam, along with making sure a working version of Flash and Java are also included in my personal installs..
View 5 Replies
View Related
May 27, 2011
I'm pretty new with boot loaders, and I'm having some troubles. I had Ubuntu 11.04 installed and working pretty well, but I went to give Fedora 15 a try. I thought dual boot would be ideal.
So I used some free space in my HD, installed Fedora 15 Live USB, / in one partion, and /home in another, and a swap.
I always use /boot in another 100 MB partition at the start of the disk, so during the F15 bootloader, I directed it to the /boot partition.
After reboot, I can get into F15, but when I select 'other' I get an error message (sorry, its hard to remember "boot img not found, press cntrl alt del " )
In a panic, I used an old boot cd, ubuntu 10.10, created yet another really tiny partition of 2.3 gigs from free space, and installed its bootloader in my /boot partition again.
I can boot back into Ubuntu 11.04 (or 10.10, which I will see nuke anyways.) But no fedora choice anymore at all?
Is there a boot cd/tool that I can use to read all 3 of my OS, and allow me to boot into the one I want?
Or should I reinstall a Fresh F15 (since i've not done anything) and make different changes during install ?
Any reason why F15 and Ubuntu can't see each other during their installs?
View 2 Replies
View Related
May 12, 2010
I am trying to figure out how to install this program i found atIt is a simle application that monitors systems.I have uncompressed it but i cant figure out how to install it.it's driving me nuts reading many websites on installing things and getting no place after a week.
View 3 Replies
View Related
May 22, 2010
Here's a screenie of partitions where Ubuntu is currently installed:[URL]..sda1 is the partition where Windows used to reside - that's why it's flagged as 'boot'. When I nuked Windows, I just left it flagged that way as I figured that's where Grub is installed and didn't want to screw anything up.
I'm about to add a new 1TB drive for Lucid (most likely). I want to move this current drive to the second drive bay so it will become sdb 1,2,3 but keep it functional (at least until I'm convinced that Lucid will work for me). Here are my questions:
Will Lucid find the old Ubuntu install on sdb automatically and give me a choice of dual boot?
Will the old Grub legacy be overwritten? Should I remove the old 'boot' flag or leave it like it is? Do I even need a boot flag on sdb since BIOS is set to boot from sda? Any other tips before I start mucking around in a perfectly functioning system?
View 8 Replies
View Related
May 31, 2010
I installed ubuntu 10.04 server in VBox. I forgot to check Samba during installation so I installed it later with apt-get. When it was finished, Samba 4 was installed. I did apt-get remove and tried to install samba 3 and can't figure out how to do it. It wants to install Samba4 again. I tried "apt-get install samba3" but no joy.
View 1 Replies
View Related
Sep 14, 2010
On a new installation of Ubuntu Lucid I can install a network printer by getting the Printer utility to search the network to find it. The Printer utility then proceeds to install the driver. However when I try to print the test page I get an error saying that it can't locate the printer. The printer is not new, and all other computers on the network (all Ubuntu Lucid) can print to it.
[Code]...
View 4 Replies
View Related
Feb 4, 2011
I work at a local library. In a few days I am getting 8 new HP g72t laptops. Is there a way to do multiple installs of 10.10 with the same partition setup, installed programs, config settings , etc? I am a volunteer and have set up many ubuntu installs before but always had each machine old and different. Now I would like to automate all the installs somehow.I picked that laptop as linuxcity.com sells them with Ubuntu installed.I got them with windows and plan to remove win 7 and do Ubuntu 10.10
View 2 Replies
View Related
Mar 6, 2011
So I have decided to switch to ubuntu since xp gave out on me. Everything seemed so easy during install untill it randomly shut off. It now does this during different stages of installation but never gets further than after entering my user details and beginning the install. Its not faulty hardware as boots into xp home ed fine. I want a full install of ubuntu only though.I have tried both 10.04 and 10.10 (32 bit) booting from Live CDs (3 diff copys, as was paranoid of probs with the iso download)
The hardwares largely unknown but easily ran xp media center previously a year or 2 before. I'm very confident its not underpowered for this.As you can probably tell I'm completely new to this and not overly technical. I have looked around and some things suggest a problem with graphics cards.
View 1 Replies
View Related
Sep 1, 2011
Has anyone done a recent install of the latest Ubuntu on a EFI motherboard? Last time I tried (right as 11 came out) I had horrible graphic errors during the install, problems install grub2-efi, and then even when I got everything installed I had graphic errors on boot up that rendered the install worthless. I think I am going to have to go to a different linux distro, which I am not really that happy about, but I need linux on this computer. know experiences with ANY linux distro and recent EFI motherboard installs.
View 2 Replies
View Related
May 11, 2011
As the title says... (when using add/remove). Not sure how it got this way, so can't just put something back - need a way to correct it.
View 1 Replies
View Related
Jun 7, 2011
I have a workstation running Fedora 15 with custom software and settings. I want to make an image of this machine for fast and easy deployment around the office (preferably a DVD, but could also use an external USB drive for install).How would you go about doing this from an existing install?
View 6 Replies
View Related
