Fedora Installation :: F15 Install Fails On Asus 1101HA / What To Do?
Jun 19, 2011
I have been running Fedora 14 on my Asus 1101HA netbook for several months without real problems. This weekend I tried to install Fedora 15, but the install failed in two ways:
* The GUI login screen never appears. I'm able to log in using character mode, but that's all.
* The network hardware is not configured, even the wired connection. Hence, I'm unable to apply updates (which I hoped might fix the GUI problem). I tried manual configuration (which is hard to find instructions for these days), but it didn't work.
The output of ifconfig shows no eth0 device, but rather something called "em2":
I've attached the Xorg.0.log file and the output of dmesg and ifconfig.
View 6 Replies
ADVERTISEMENT
Mar 12, 2010
I have an eeepc 1101HA with NBR 9.10 dual boot with XP Home
I have been using this configuration successfully for months, after quite a bit of work fixing the sound issues, wifi issues and video issues. It still has a standby issue, but its liveable and Im quite happy with its performance for such an inexpensive machine.
I tried to boot to XP today, and I must have picked the recovery partition by mistake out of the grub menu.
It loaded "windows pre-execution environment" and then asked me if i wanted to run recovery. I told it to cancel before it did anything, or so I thought.
It only had 10-15 seconds, so whatever it did couldn't have been much.
When it rebooted I got this error.
Code:
I booted to a usb stick with the 9.10 live environment, and ran fdisk
Code:
Does anyone know what I can do to recover this partition?
View 6 Replies
View Related
Apr 6, 2011
I just assembled a new computer with Intel Core I3 processor and Asus P8H67 motherboard and 4 MB of memory. It has a 2TB Hitachi Deskstar Hard Drive and Asus DVD. I am trying to load Ubuntu 10.10 directly (without first loading Windows) without success.
I have tried 4 separate downloads of Ubuntu - 64 bit, 32 bit with Desktop and Alternative. I have changed a variety of parameters and various tricks suggested on other threads. The Desktop (32 and 64) versions get me to Busybox shell with message (Initramfs) Unable to find a medium using live file system. The Alternative version hangs with the messages:
RAMDISK: Couldn't find valid RAM image startgin at 0;
No filesystem could mount root, tried ext3, ext2, ext4, fuseblk;
Kernal panic - not syncing VHS;
Unable to mount root fs on unkown block(1,0).
For parameters I think have tried them all (but not in all combinations). I tried exiting twice from BusyBox as suggested on forums but that just hangs the system. I also turn off the quiet and splash to try and see what is going on....but it is too complex and goes to fast for me to follow.
A final suggestion was that the P8H67 is too new for Ubuntu 10.10 and to try the new version 11 coming out...I am new to Linux and reluctant to try a Beta
View 3 Replies
View Related
Aug 10, 2009
I would like to install Fedora 11 on an ASUS P5L-VM 1394 motherboard with a 3 GHz Pentium 4 CPU. This is an LGA775 socket mobo with a Intel 945G chipset. Two SATA hard drives are plugged into SATA ports. An IDE DVD drive is plugged into the IDE/ATA port. Using the 32 bit Fedora 11 installation disk, I have seen two cases:
1) No hard drive recognized. When i get to the disk configuration screen, there are no options to choose from.
2) By monkeying around with the BIOS settings or switching the SATA ports the disks are connected to, I can get an alternative mode in which no drivers are found for the DVD drive either.
Currently, a version of Ubuntu is installed. UPDATE: The board was purchased in a P3-PH4C barebones, which for unknown reasons requires a different BIOS issue than the regular P5L-VM 1394. Updating to the most recent BIOS does not resolve the problem. One the installation procedure fails to recognize the hard drives, going into a shell and examining the boot up log shows that the kernel recognized both hard drives. So it's down to why the installation procedure is not recognizing them.
View 1 Replies
View Related
Jan 23, 2009
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
[Code]....
View 7 Replies
View Related
Jun 28, 2009
I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
View 1 Replies
View Related
Sep 10, 2009
I am attempting to install Fedora 11 on a Dell Windows Server 2003 computer from CD (I just want to override the Server PC with F11). I used this media in my class last night after testing it, so I know the media itself is good. We did have lots of issues getting the keyboard and mouse to work during the install attempts last night, too, but eventually it worked. Unfortunately, at home is a different story!
I boot from install Disk 1 and get to the first screen with the option of testing the media or skipping it and I only get one keystroke then nothing. F11 just hangs/stops/freezes/locks up. Reboots don't help and I attempted to install from the F11 DVD I made, too, but the machine completely wouldn't see that disk at all! The keyboard is connected directly to the computer via PS2. I don't have a USB keyboard laying around nor an adapter to try.
I would love to hook up my children with F11! I did manage to figure out what files to download, burn to disk and how to install F11 at school yesterday).
View 2 Replies
View Related
Feb 26, 2010
I'm newbie in Linux, but have used Windows and Mac OS X Leopard. Used RedHat in the past, and can't figure this out. I burned Fedora12-x86_64 DVD image on DVD, and start install. Whether I use "linux text" command from boot or just select Install at graphical prompt, everything goes OK until I select hostname. I leave it as "localhost.localdomain" and press Enter. It always give me an error "Can't load class=TimeZoneWindow".
My computer is connected via ethernet to my router, and I had no problems getting online in Windows. Now, in case there are hardware questions:
Intel Pentium 4 with HyperThread enabled and 64bit support (Windows 7 Ultimate 64bit runs perfectly in 64bit mode)
2Gb of DDR 400Mhz RAM
I have 2 SATA hard drives with RAID option as Mirror (BIOS settings - RAID or AHCI)
And 128Mb ATI RAdeon X300 series. Pretty simple, but this error aborts my installation.
I tried to do Anaconda updates, but I have no clue about URL where the image is, ex:
linux updates=[URL]
or I tried configuring network:
linux ip=192.168.1.113 netmask=255.255.255.0 gateway=192.168.1.1 dns=68.193.158.40,24.115.70.53
and no luck. Why does "Can't load class=TimeZoneWindow" appear? Is it a network issue or what? I've seen the screenshot for TimeZone screen in the Installation Guide, but I never get to it.
View 13 Replies
View Related
Dec 27, 2010
I am saddened that I can't install any Linux distro with ease on my HP m8530f computer which runs on a m2n78-la motherboard. It has a Phenom CPU, 6 SATA ports and probably a fakeRaid (at least that's what I guess is causing problem). The Fedora 14 Desktop install goes all the way to the end and then I get a fail message due to not being able to mount /dev/mapper/xxxxx.
P.S. the motherboard only has SATA mode or disabled for HardDrive mode and no any other options. Seems like this is an HP custom made motherboard from Asus hence the limited options in Bios setup.
View 3 Replies
View Related
Mar 12, 2009
As I have no blank cds handy right now, I had to go the way descirbed here:URL...But when I seect my partition and / (no sub dirs, an empty ext3 formated 6.8GB partition, exclusivly for that usage) it tells me there ws no installation media found and the search path got automagically adjusted to /imges/image.img.And ideas howto fix that? Or how to install fedora from harddisk (without big fuss)?
View 2 Replies
View Related
Jul 24, 2009
I have sevral older machines that cannot boot from usb. Until now I have installed fedora using the provided boot.iso on a CD and an external USB dvd drive with the full install DVD.
With Fedora 11, this fails. It gets as far as "finding storage devices" and fails, telling me that an unhandled exception has occured. It offers to save the details, but freezes looking for a suitable location. I have no such problems with the same DVD/external rw drive on systems that can boot directly from usb.
View 2 Replies
View Related
Jun 7, 2010
I'm currently running F11 and am trying to replace it with a fresh install of F13, using the same partitioning layout. I downloaded the F13 i386 DVD ISO using bit torrent. (The sha256sum of my downloaded ISO matches the reference sha256sum value.) I'm trying to do the fresh install of this ISO from hard drive (without burning a DVD). Last summer I did the same procedure of installing a downloaded DVD ISO from HDD when replacing F9 with F11. The installer (Anaconda 13.42) proceeds to the point where I specify my custom partitioning layout. It then prompts me about storing a boot loader. Shortly after I reply to that, the installer gets an "unhandled exception".
rpmdb: Program version 4.8 doesn't match environment version 4.7
error: db3 error (-30971) from dbenv -> open: DB_VERSION_MISMATCH
The only nonstandard thing I did was the following. According to the F13 installation guide, for installation from HDD the file "install.img" from within the ISO files must be copied to a directory named "images". The F13 installation guide gives the following procedure:
mount -t iso9660 /path/to/Fedora13.iso /mnt/point -o loop,ro
cp -pr /mnt/point/images /path/images/
umount /mnt/point
Instead, I used "Archive Manager" to extract "install.img" from my DVD ISO. I copied it to a directory named "images".
View 9 Replies
View Related
Mar 7, 2011
Installation fails part way-in , prelim formating of drive is ok, Failure comes when network connection is require to continue. The Marvell 88E8056 PCI-E gigabit Lan Controller is correctly listed but network manager fails to bring it up. when I put the old F10 drive in , everything boots up , I can surf the web.
View 2 Replies
View Related
Jun 20, 2011
Both F15 KDE Live CD and DVD new installs fail on HP 2133 mini notebook. The device has previously accepted F12 installation without a problem. The HP 2133 has a VIA C7 processor. Is this CPU is no longer compatible with Fedora? The syslog repeats endlessly 'microcode: no support for this CPU vendor'. The Live CD will not even begin the install to diskl. The DVD will install but will fail on reboot with the microcode error. How to overcome this installation problem?. Is there a kernel upgrade or microcode update that has already resolved this and how can it be installed?
View 1 Replies
View Related
Aug 23, 2009
FC11 i386 dvd iso image passes pgp verify. Burns fine and verifies fine under nero. Boots fine and verifies fine on my athlon system and installs just fine. Not one issue at all. 1374 pkgs install without issue. Take the same disc put it into my dell poweredge 2850 (dual xeon) and the disc fails to verify.
Even if I go ahead and try to install, it will boot and go through the menus. Then on package install at some point it will say one is corrupt and halts the install. Yet ubuntu 9.04 installs just fine on it. So I don't see how it could be the dvd player itself, though not 100% ruled out.
View 4 Replies
View Related
Dec 5, 2010
Chili555 where are you?
I am running Ubuntu Release 10.04 (lucid), Kernel Linux 2.6.32-26-generic-pae, GNOME 2.30.2.
I have installed the ASUS USB-N13 according to your advice in previous posts, specifically, in your advice to 828688 Ben.
The dongle seems to be operating as it should. The LED does its flashing at what appears to be the correct time. Wicd also looks correct. Networks are found with good signals shown. Everything looks correct. But when I attempt to connect, "validating authentication" runs for quite some time, and eventually results in a dialogue window stating the communication failed. The required WEP password is entered in the RT2870STA.dat file, and again in the wicd window.
I have entered as much detail in the RT2870STA.dat file as I dare, and believe it to be correct.
ndiswrapper is not installed. Network Manager is uninstalled. Only wicd remains.
View 9 Replies
View Related
Jan 1, 2011
when i select try from the usb drive everything works fine, but when i select install it never goes further than the "preparing to install ubuntu-netbook" page all options (available space, power, and internet are all checked. it will stay on this page all day and i don't see any hard drive or usb drive activity.
View 1 Replies
View Related
Dec 10, 2010
Trying to install 64-bit F13 or F14 on an Asus P5KC, 2.4Ghz Q6600, 4GB OCZ RAM is proving futile.Initially Fedora 13 would boot, but after the initial yum update it picked up a delay of about a minute at the'Starting mdmonitor' stage, although it was not mdmonitor causing this, as disabling the service simply moved the delay on to the 'Starting system message bus' stage.I could and was living with this for few days, then more updates were available, so I hoped they'd fix it and applied them. Bad mistake as now Fedora 13 now gets stuck permanently at this point. Even after a fresh re-install and update.Fedora 14 does exactly the same thing, it's fine (bar some graphical glitches when booted) until I run 'yum update', then it dies in the same way.On both installations, attempting to boot the previous kernel doesn't help, so I don't think it is the kernel itself but a change that is made to the system during the update process. I know the machine's hardware is fine, before being formatted it was a file server running CentOS 5.1 with an uptime in excess of 200 days.
View 9 Replies
View Related
Oct 14, 2010
I used this laptop since 8.4. When first 10.10 beta arrived I decided to upgrade as usual. all seemed to go well. At reboot the computer was hanging after grub, with a blinking cursor on top left. Then was turning off and had getting into a weird hung mode. Was not possible to start it over. The only solution was unplug, take battery off and wait for a minute. Now with the official 10.10 I decided to install it over. But the live CD start right after the first screen. Again with the blinking cursor and angs the machine again. Windows works perfectly as well as all Ubuntu, including 10.4
View 9 Replies
View Related
Apr 21, 2011
I'm trying desperatly to install Ubuntu Netbook Remix on my Asus Eee netbook. I've created an USB bootable stick. It boots. I get to the screen where I can choose the language and where I have the choice between "Try" or "Install". I choose Install. After that, I get to the screen about the preparation of the installation. It says I have enough disc space, that I'm successfly connected to the power and to the Internet. I click on next and... nothing happens! It stays for ever on that screen.
View 8 Replies
View Related
Nov 23, 2010
I tried to run Ubuntu 10.10 - Netbook and Ubuntu 10.4 live CDs on my ASUS 901.
Both run well.
But neither reboot after clean install.
After the machines BIOS splash screen there is just a blinking cursor at the left top of the screen. No ubuntu/linux/kernel messages whatsoever.
I tried installing both versions on both SSD-s (4GB & 32GB) and ensured the BIOS was correctly set to boot from the correct one.
I searched the net quite a lot but didn't find anything that could relate to an ASUS 901
View 1 Replies
View Related
Feb 15, 2011
I am trying to install ubuntu netbook remix on my asus netbook.I created a USB drive from windows.On Save and Exit from BIOS setup, system boots from hard drive with Windows 7 OS.
View 3 Replies
View Related
Feb 4, 2011
configuring my ASUS USB-N13 Wireless-N Adapter I was able to get the drivers installed as per the instructions I found in the forum but I'm not sure how to get the ASUS USB-N13 Wireless-N Adapter to be recognized by the drivers and how to configure it to connect to the Internet I tried following the instructions it came with but I did not understand the steps to set it up it was like chinese to me no clue what it said I am running Redhat Linux 9.0 on the laptop
View 6 Replies
View Related
Jul 8, 2010
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies
View Related
Oct 20, 2010
I just purchased a new PC with the following specs:
Intel Core i5-760
ASUS P5P55D-E LX (S1156 mobo)
Sapphire HD 5750 Vapor-X 1GB Video Card
Samsung 1TB HDD
Corsair DDR3 PC1333 Gaming RAM - 2x2GB
DVD: Samsung DVD burner (internal)
I have made several trials to install Lucid Lynx but all failed:
1. Installed Windows 7 64-bit, hdd formatted as NTFS and ext3, then trying to install Lucid Lynx 32-bit : failed.
2. Installed Windows XP 32-bit, hdd formatted as FAT32, then trying to install Lucid Lynx 32-bit : failed.
3. Trying to install Lucid Lynx 32-bit with a clean hdd formatted as FAT32: failed.
In all the scenarios above, I have tried using Ubuntu installers on CD, DVD, or USB. on CD and DVD, the process always stopped after the Ubuntu logo screen, not even reached the langauage selection screen. On USB, with Legacy set to On in the BIOS, it did run and started by the option screen where we get to choose booting from the usb, or booting from hdd, or memory test, etc., but after choosing the booting from usb (and then hdd also) option, the process also stopped after the Ubuntu logo screen. I have experience dual booting Windows XP with Lucid Lynx on an older system, so I'm not completely new in this. I'd like to know what actually went wrong?
View 2 Replies
View Related
Dec 6, 2010
I bought ASUS K50c with SIS graphic card and have win7 on it (i install it alone).I want to install ubuntu!I found installation of ubuntu 10.10 and tried to install it. There is a huge problem with my graphic card because resolution is 800*600! I found installation of ubuntu 10.04 LTS and tried to install it. Again problem. I tried to download drivers from www.sis.com but there are tar.file and i don't now what is that or how to install it.In windows I now how to install anything, but there is a problem.I am ready to install any version of ubuntu just to solve this problem.
View 2 Replies
View Related
Feb 28, 2011
I have problems installing Ubuntu Netbook Edition (ubuntu-10.10-netbook-i386.iso)on Asus eeepc 1001PX. code...
I have tried both Universal-USB-Installer-1.8.3.3.exe and the Ubuntu start up disk creator to prepare my USB-stick.
I have earlier installed the Ubuntu desktop 10.10 on the same machine with the same method without problems.
View 6 Replies
View Related
Dec 24, 2009
I have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
View 4 Replies
View Related
Aug 29, 2014
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
View 1 Replies
View Related
Jan 20, 2011
The situation: computer based on Asus P6T motherboard. Two RAIDS:
- 'boot', on motherboard built-in RAID controller (CentOS 5.5 installed on this RAID)
- 'data' on 3dware RAID card
At one moment a CPU fan fails and the system halts. After the fan is replaced, BIOS informs it's reset and all the inner controller data are forgotten. After I switch it to 'RAID' mode, it remembers it was a mirror raid (RAID 1) installed, but the file system on it is completely trashed.
The 'data' RAID run by external controller isn't affected by the system failure. Three questions:
- is it worth trying to install OS on the rebuilt 'boot' RAID once again? Looks like if BIOS settings are lost for some reason, there's chance of completely losing RAID data
- has someone encountered similar problem with built-in RAID nd was it possible to recover data?
- will the software RAID be worth creating instead of using hardware RAID to replace the 'boot' drive?
View 2 Replies
View Related
