Debian Installation :: Asus H97-Plus - UEFI (Secure Boot) / Black Screen Install
Aug 29, 2014
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
View 1 Replies
ADVERTISEMENT
Sep 26, 2014
I have Acer Aspire S7-392. It has two 128GB SSD drives. They are using RAID 0. Currently there is Windows 8.1 installed on the RAID 0 drive.I am trying to install Debian 7.6 (wheezy) alongside Win 8.1 (dual boot). Actually I have already created linux partitions and installed mentioned Debian on my computer. I had to skip grub installation due to fatal error that had occurred. (Everything on existing RAID 0 volume).Now I am looking the way to install grub and boot Debian. I have disabled UEFI Secure Boot. It didn't work.
My question is:
1. Is it possible to have Win 8.1 and Debian dual-bootable on the same RAID 0 volume? How to install grub and boot debian?
2. If not, what am I supposed to do to achieve what I want (these two systems on one computer)? Delete old one RAID 0 and create two new: one for windows and one for linux partitions?
View 0 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Sep 12, 2014
I installed Debian Jessie (netinst, daily snapshot) on my Acer Aspire V5-123 laptop in the UEFI mode with the secure boot turned off. everything (network, hardware, partitioning, ...) went smoothly to the last step, but after removing the boot media (USB stick) and rebooting, the firmware could not find the boot device ! The only thing I can think of, is that the EFI boot is not set up properly by Debian installer, but I don't know how to fix it.
View 11 Replies
View Related
Jul 8, 2010
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
Dec 28, 2014
I am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.
I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.
View 14 Replies
View Related
Aug 16, 2015
On a Zenbook UX305, I did a fresh install of Debian. After booting, the screen turns black and I can't switch between terminals by typing Ctrl-Alt-F1..F7. After a boot with the keyword debug, the file /var/log/debug has the following contents:
URL] ....
View 4 Replies
View Related
Sep 19, 2015
Yesterday I installed Debian Jessie, I ran into a few problems at first, but in the end everything worked fine. It started the desktop environment (gnome). I installed a few programs(sudo, chromium, tor) and saw that everything was working correctly. I shutdown the system with the command "shutdown now". Then I booted into windows to make sure I hadn't broken anything there (which I did not), but when I tried going back to Debian, it booted to a black screen with a cross as a pointer. By pressing ALT CTRL <FKEY>, I can effectively get to other virtual terminals and login there, however trying to start the desktop environment with "startx" results in the same thing.
I installed Debian on an external hard drive and made four partitions, boot, /(root), /home, and swap.
I also tried to apt-get install --reinstall gnome and apt-get install --reinstall xorg, but the result is still the same
Not actually solved, but in the end just reinstalling got rid of the problem.
View 6 Replies
View Related
Feb 6, 2015
I have a server in which I'm trying to install Debian into. There's no BIOS, only EFI boot. The vendor locked it down so there's no way to see it or get into it.
The Wheezy 7.8 netinst CD has EFI boot parameters and works on everything I throw it in, except this one server. Booting it up, the code doesn't see the EFI and boots into normal mode, negating every chance to install it (dozens upon dozens of failed installs).
During boot, I press the [TAB] at the Debian Linux installer menu and get the load parameters (/install.amd/vmlinuz vga=788 etc). What parameter can I add to this line to get it to run in UEFI mode so we can install it?
View 10 Replies
View Related
May 27, 2015
I have Debian installed but I need to dual boot with distribution based on Ubuntu 14.04. This is my first UEFI dual boot install attempt. And I must do it right. I must not lose my Debian !
Code: Select allDisk /dev/sdb: 232,9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
[Code] ....
Ubuntu will go to /dev/sdb5 but I don`t no for sure what to do when installing Ubuntu. How to select during install existing UEFI partition(/dev/sdb1) so Debian and Ubuntu can use it. Can I select existing UEFI partition like I would do for /home or /swap ? Will this work ?
And what will happen with Grub if I select install grub ? I want to manage grub from Debian, it is my main OS. Can I skip Grub install and just update grub on my debian after ubuntu install ? Or I just install grub, then after completed Ubuntu install I install it again from Debian. Will this work ?
Is procedure of installing dual boot trivial like before or UEFI hide`s some unpleasant surprise.
View 8 Replies
View Related
Dec 15, 2015
I'll start off with stating my problem and summarize how I got to it.
I installed Windows 10 on an SSD. I installed Debian 8.2 after it. The SSD was/is a GPT disk. I installed both installations from a UEFI booted device (DVD for Windows, and USB drive with Live CD for Debian).
I tested it after each installation making sure I could boot via UEFI into Windows, then Debian, then Windows, to make sure nothing broke.
I rebooted the machine. Suddenly, no more UEFI. Nothing. I didn't change any BIOS/UEFI setup menu settings. Not even my USB drive with Live CD will boot through UEFI anymore. Even when nothing else is plugged into the system.
My situation is actually a bit more complicated than that, but I think that will suffice for now. I can still boot into the Live CD on the USB drive, just in Legacy mode only. I mounted the EFI partition on /mnt/boot after I mounted the file system for Debian on /mnt. It is identical, as far as I can tell, to as it was before when it was working.
My motherboard has CSM and Secure Boot, both have been set up how they need to be to boot UEFI into Debian. Tinkering with them further after things broke did not fix it. I tried all variations of options/settings.
The GRUB Reinstall guide says to be in EFI mode before starting it, so I can't do that.
My motherboard is an ASUS X99 Deluxe, and I've heard ASUS has special "features" (read: bugs) that come with their boards. Searching hasn't brought up any other people with this issue. I believe the firmware is updated to it's most current one.
I've tried dd-ing my backup of my old system, from before trying to migrate to a Dual Boot system, to the SSD (after backing up the dual boot setup with dd -> <name>.img via the Live CD USB). However, that won't boot either as it is a UEFI install as well.
The layout of my EFI partition is as such:
/boot/EFI/Boot/bootx64.efi
/boot/EFI/Microsoft/<Microsoft-naming>.efi
/boot/EFI/debian/grubx64.efi
I've heard that the standards on how that's supposed to be set up isn't a standard. However, since it worked booting into the OS' the first time, I don't see how that could be the issue (a bad hierarchy layout leading to the UEFI not being able to see the OS installs).
I've seen that I can boot to an EFI shell (called Shell.efi, apparently) via an option in my UEFI BIOS setup menu on my motherboard. Is that an option here to somehow bypass this strange issue?
All I can think to try is burn it all and start over. But not knowing what caused it means I could just make it happen again. Plus, I can't boot into UEFI install media, so I can't install UEFI boot OS'. :/
View 5 Replies
View Related
Feb 15, 2016
As you probably know Debian LIVE ISOs is not (U)EFI bootable since there is no EFI bootloader on them. I need to boot usb for uefi mode...
View 3 Replies
View Related
Dec 23, 2014
My Toshiba Satellite C870-198 has Debian 7.7 installed in UEFI mode alongside Windows 8.1. The GRUB menu no longer displays, but the machine boots straight into Windows.
I can boot into Debian or Windows from rEFInd installed on a USB stick. The rEFInd menu has the following entries:
The Debian entry actually launches the GRUB menu which was installed with Debian.
Code: Select allBoot Microsoft EFI boot (Boot Repair backup) from Basic data partition.
Boot supposed Microsoft EFI boot (probably GRUB) from Basic data partition.
Boot EFIubuntugrubx64.efi from Basic data partition.
Boot EFIdebiangrubx64.efi from Basic data partition.
Boot bootootx64.efi from Basic data partition.
Boot vmlinuz-3.2.0-4-amd64 from boot.
In an attempt to fix GRUB I executed the commands in the 'Reinstalling grub-efi on your hard drive' section of: [URL] ....
Code: Select allmount /dev/sda1 /boot/efi
... surprisingly returned:
Code: Select all$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
Did not find any restart pages in $LogFile and it was not empty.
The file system wasn't safely closed on Windows. Fixing.
Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
... returned "EFI boot on HDD".
[Code] ....
... Where is Debian?
FULL HISTORY ....
=============================
The laptop came with Windows 8 preinstalled. I switched off Secure Boot and installed Ubuntu for UEFI dual boot. I recall having to use Boot Repair to get the GRUB boot manager working properly for both systems.
Recently I decided to replace Ubuntu with Debian 7.7 and first cloned the entire hard drive to a USB drive (The Clone Drive). This drive successfully boots into Ubuntu in UEFI mode.
Following this I took the opportunity to update Windows to 8.1, which broke GRUB as expected, so that the machine would only boot straight into Windows.
I installed Debian from a live USB stick in the mistaken belief that it would be bootable in UEFI mode. It did boot OK in legacy mode.
I then burned the full Debian 'DVD' image to a USB stick, booted it in UEFI mode and reinstalled Debian. In UEFI mode GRUB allowed me to boot into both Debian and Windows.
At this point I tested The Clone Drive. It was still able to boot into Ubuntu as previously, but after powering down, unplugging The Clone Drive and rebooting, the GRUB menu failed to appear and the machine booted straight into Windows. This is its current state.
View 13 Replies
View Related
Sep 18, 2015
Debian-live-8.2.0-amd64-xfce-desktop.iso do not boot in uefi mode. I would like to know if live image can boot uefi mode? If not how can I do later from bios to install grub efi?
View 1 Replies
View Related
Jul 8, 2011
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
View 14 Replies
View Related
Nov 8, 2010
I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies
View Related
Mar 8, 2010
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies
View Related
Mar 24, 2015
I've set up a dual boot system with Debian and Windows 8, both installed on their own drive, with their own boot partition. I installed eveything in UEFI-Mode with fast- and secure boot turned off. Both installations are working, as I can access them by changing the boot priority in the Bios. What I cannot achieve is to let grub boot my windows installation.
This is the output of parted -l:
Code: Select allModel: ATA Samsung SSD 840 (scsi)
Disk /dev/sda: 128GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 512MB 511MB fat32 boot
2 512MB 111GB 111GB ext4
3 111GB 128GB 17,0GB linux-swap(v1)
[Code] ....
As you can see, my linux install is on sda, my windows install on sdc (sdb beeing a data disk). This is the entry I made in the 40_custom file in etc/grub.d:
Code: Select allmenuentry "Windows 8.1" {
insmod part_gpt
insmod chain
set root='(hd2,gpt2)'
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
boot
}
I think this should be fine, but if I choose the windows entry wehen grub is booting, it says: error: no such partition. It's my first debian installation, and I am stuck here. Not too much of Linux experience in general.
View 12 Replies
View Related
Nov 20, 2015
I just installed Debian jessie on my Dell Latitude E6410 using the UEFI install. No everything went well during the install, but after the install the first boot i ran into an issue that the laptop will not boot.
When I go in to the boot menu of the Dell Latitude E6410, I see that debian has created a uefi name (Debian)
When I select this, it boots without any issues. After again a reboot again, no luck still a black screen during the boot.
Seems that the only option to get my laptop booting is by pressing F12 and select Debian in the UEFI boot of the laptop.
Is there any way i can get my laptop to boot Debian directly from UEFI, without having to press F12?? (Also disabled all legacy devices to start up but no luck)...
- Debian Jessie X64 (Using 32/64 network install, via USB)
- Dell Latitude E6410 i5 (1280x800 intel graphics) latest bios A16
- SSD drive (Samsung 470 series)
- Debian is the only OS installed
View 1 Replies
View Related
Feb 17, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on an IBM ThinkCentre. I have earlier had a dual boot Win 8 and Ubuntu 14.04 installed on the computer. When I installed Debian Jessie, I deleted the Ubuntu partitions and created new partitions from the free space. The install went fine and the Debian EFI/UEFI version of Grub was installed, but clearly at some other place, as when I boot the system, the old Ubuntu Grub pops up and of course cannot find the necessary files that it is looking for.
View 9 Replies
View Related
Jan 1, 2010
Im newer in ubuntu i try to install ubuntu 9.10 in my Laptop HP DV5 Core2Duo 4Go Ram rin Windows 7 32bits and in Disc C: already windows 7 install on then i want install the both in th same HDD, like the same operation i make it in my Desktop Dell and it work perfectly, but now i have a error message please see Screenshot and I try to boot from CD and install Ubunto also i have screen black with 1000 ligne error
View 7 Replies
View Related
Jul 16, 2015
I got a Lenovo T430s and when I boot up the USB I am presented with different options like
install
install graphical
install 64
install 64 graphical
etc
When I pick one and hit Enter I am presented with a black screen.
View 6 Replies
View Related
Feb 23, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:
Holding shift on startup - Nothing
Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.
I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.
View 2 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
May 11, 2011
I tried out many distros on my desktop before experimenting with my oshiba Satellite A665 laptop with integrated intel graphics. Everything worked out as normal until I was testing Ubuntu on a live cd, I clicked install and it sent me back to the login screen before I had made an account. So I then chose to restart and it started glitching so I had to manually power off. Ever since then whichever distros I try to install, they face numerous errors. On Ubuntu and Peppermint they freeze on the 5 dots installation part and Linux Mint just has a permanent black screen. Even the current Peppermint OS (only distro i have)hangs on the 5 dots when trying to boot onto the computer. This has resulted me in a computer that cant do anything, i've tried the noquiet and nosplash options but they don't seem to work. I was thinking of installing Windows and maybe erasing the disk by installing another distro later?
View 8 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
Jan 30, 2015
I'm trying to install debian and when the installer starts it UEFI at the top, instlal completes however on reboot it says 'no operating system found' i've read it can be because of UEFI but I have tried different bios options but to no avail.
Bios options
Sata mode: AHCI/IDE (haven't tried IDE yet)
Tried various combinations of the below
CSM: enable/disable
Boot Priority: Auto/legancy first/uefi first
Quick Boot: enable/disable
Boot up Num-lock Status: on/off
View 14 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
