Red Hat / Fedora :: Unable To Install Asus Usb-n13 Wireless Adapter
Feb 4, 2011
configuring my ASUS USB-N13 Wireless-N Adapter I was able to get the drivers installed as per the instructions I found in the forum but I'm not sure how to get the ASUS USB-N13 Wireless-N Adapter to be recognized by the drivers and how to configure it to connect to the Internet I tried following the instructions it came with but I did not understand the steps to set it up it was like chinese to me no clue what it said I am running Redhat Linux 9.0 on the laptop
View 6 Replies
ADVERTISEMENT
Jul 21, 2010
I just got my desktop set up with Ultimate Edition, an OS based on Ubuntu. For more information on my OS, please click: here. I am using UE version 2.6, which is based on Ubuntu kernel 2.6.32, so any Ubuntu users.I've gotten my wireless usb keyboard and mouse to work fine, and my speakers are ok, so I know my usb hardware is working properly. The Situation: I can't get my new ASUS USB-N10 wireless adapter to work. My computer hasn't recognized it, and there are no usable instructions on the driver CD for installing the device in Linux.ASUS claims this adapter works on Linux systems with 2.6-type kernels, but I've been trying for 2 weeks to no avail.
View 6 Replies
View Related
Jul 5, 2011
I currently know next to nothing about networks in Linux (yes I am working on that). I have just brought a Asus n13 wireless adapter after failing to get my laptop wireless working. I am using the 2.6.32-5 Debian squeeze kernel. The device connected once after I did the following:
apt-get update
modprobe rt2870sta
iwconfig
ifconfig wlan0 up
The device connected to wifi and was working fine. I then shutdown and rebooted to see if it would automatically connect on start up and now, although nothing seems to have changed and even after I repeated the steps above it did not connect. The network manager applet as well as listing the asus adapter(as ralink 802.11 WLAN) lists a Texas instruments PCI1410 pc card cardbus controller which i didn't before.
This is the output of iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 Ralink STA ESSID:"" Nickname:"RT2870STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:-39 dBm Noise level:-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon: .....
pan0 no wireless extensions.
This is lsmod | grep rt2:
rt2870sta 326811 1
crc_ccitt 1039 2 irda,rt2870sta
usbcore 98453 5 btusb,rt2870sta,uhci_hcd,ehci_hcd
View 10 Replies
View Related
Jul 26, 2011
I recently purchased an Asus n10 wireless usb adapter to use with my media server, running Ubuntu 10.04 LTS (Lucid Lynx). After spending several hours today with many of the threads (especially this one about the Asus n13) it seems that I've run out of ideas.
My network is running a hidden (non-broadcast) SSID ("Potato") with wpa2 personal encryption.
Here is the relevant information from lsusb:
Code:
Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer Inc.
Iwconfig follows. The rest of the values, like link quality & etc, are all zero:
Code:
wlan0 802.11b/g ESSID:"Potato"
Mode: Managed Access Point: Not-Associated Bit Rate: 0kb/s
And the kicker is that the interface doesn't seem to be available, despite the above reports. ifconfig wlan0 up produces:
Code:
SIOCSIFFLAGS: Resource temporarily unavailable
View 9 Replies
View Related
Feb 21, 2011
recently I bought a an Asus n13 usb wireless adaptor. It came with the linux drivers installed and some brief instructions, but make failed and I don't know why. I am running ubuntu 10.10 (64bit) and gcc version 4.4.5.The error messages from make
Code:
[angus@angus-laptop 2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13]$ sudo make
make -C tools
make[1]: Entering directory `/home/angus/bin/drivers/2009_0811_RT3070_Linux_STA_v2.1.1.0_USB-N13/tools'
gcc -g bin2h.c -o bin2h
[code].....
View 3 Replies
View Related
Aug 9, 2010
Im currently unable to install a wireless USB network adapter because it requires an installation which can only be done with a cd and im not sure how to install the software to run the wireless adapter.
View 1 Replies
View Related
Dec 31, 2010
I recently installed Fedora 14 and am unable to configure my Netgear WG111v3 wireless adapter in KDE However XFCE and Gnome work fine. Has anybody had this problem?
View 1 Replies
View Related
May 5, 2010
I have a Asus N13-usb adapter and i am running ubuntu 10.04 on my desktop. I tried all those commands that you have posted but it led me nowhere. I was wondering if you can help me start off from scratch. I have typed lsub and it showed the device. I followed this thread [URL]and i did it up the part where you downloaded the driver. but i was not able to go further once i typed in the command :
cd Downloads
tar -xvzf
View 9 Replies
View Related
Dec 24, 2009
I have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
View 4 Replies
View Related
Apr 12, 2011
I am running Fedora 14. I've had an ASUS wireless adapter working for a few months now, with no problems. Today, I installed updates, one of which required a computer reboot (not just logging out and back in). I rebooted the computer, and when it came back up, the wireless adapter did not work.The adapter is visible after lsusb, but there is no wireless showing after iwconfig. What happened? How do I fix it?
View 10 Replies
View Related
Jan 4, 2011
Running Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
[Code]...
View 9 Replies
View Related
Feb 2, 2010
I just got a new Asus Eee 1001P, and the wireless isn't working at all. I had an Asus EEE 1005HA before that and since both use the AR8132 network card I hoped it would be the same problem as with that, where installing the backports fixed the problem. However, that doesn't do anything. With the 1005HA the connection was only flaky and disconnected a lot, but the 1001P doesn't find any networks to connect to at all. Also, the mobile wireless will connect only once and after disconnecting every attempt to reconnect ends in that connection symbol spinning wildly until I tell the network manager to disconnect. On Kubuntu it doesn't even connect once.I never had that problem with the 1005.
Code:
$ lspci
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
02:00.0 Network controller: Atheros Communications Inc. Device 002c (rev 01)
[code]....
View 9 Replies
View Related
Mar 27, 2011
1. Installed a fresh 10.10 and upgraded all packages (via Ethernet).
2. Downloaded latest drivers from ASUS webiste (DPO_RT3070_LinuxSTA_V2.3.0.2_20100422)
3. Unpacked and tried to compile:
The wireless card is working with the driver rt2870sta, but I've read not all the capabilities of the device is unleash unless the native driver is used.
View 2 Replies
View Related
Mar 9, 2011
I have just installed Ubuntu 10.10. It is great and all but I am not able to get my wireless adapter working...it is a cheapo one and I have found different tutorials around the internet trying to get it to work...to no avail!
View 1 Replies
View Related
Feb 3, 2011
i am using fedora (2.6.35.6-45.fc14.i686), i am not able to configure the usb based wireless adapter, its DWA 125(Dlink) uses ra chipset.
lsusb
here is the output
Bus 001 Device 002: ID 07d1:3c0d D-Link System DWA-125 Wireless N 150 Adapter(rev.A1) [Ralink RT2870]
i have got the driver loaded with the help of modprobe, still unable able to make it right. when i use system-config-network - wireless - no sign of RT2870.
View 2 Replies
View Related
Jul 16, 2011
However I am having some issues with drivers. I need to install a Patriot Wireless N USB wireless adapter in Crunchbang but when I follow the directions for installing the drivers and am using the command "make" I get an error that says '*** /lib/modules/2.6.32-5-amd64/build: No such file or directory. Stop . *** [modules] Error 2"
View 1 Replies
View Related
Jan 13, 2010
I'm unable to use Cisco Linksys Wireless-G USB adapter - Model No. WUSB54GC ver 3.
Ubuntu distribution : Hardy Heron (updated)
Desktop Environment : wmii
lsusb :
Code:
Bus 007 Device 006: ID 1737:0077
Bus 007 Device 003: ID 04f2:b008 Chicony Electronics Co., Ltd
Bus 007 Device 001: ID 1d6b:0002
Bus 006 Device 001: ID 1d6b:0002
[Code]....
Tried startup with device connected, no success.
Read some threads which generally correspond to version 2 of the device.
It probably uses Ralink chipset(cmiiw). I neither have Rt73 nor prism2_usb installed, confirmed by lsmod.
View 2 Replies
View Related
Apr 27, 2009
I'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
View 9 Replies
View Related
Jan 15, 2011
I can't post messages, I think something is wring with my internet.Anyway, I'm gonna copy paste what I've been trying to say...I just bought the TP-LINK Model No. TL-WN821N. It's an atheros. And I was wondering where can I find the drivers for Linux. It only includes drivers for Windows.
I don't have much experience with networks,I found this website,
http:[url]......
I got stuck in the patch section, I don't know what they are trying to say. They are using
diff -urp compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c compat-wireless-2009-02-22_AR9170_230209/drivers/net/b44.c
They are comparing the same file, there is some code they are showing but I don't know what they want me to do.
View 9 Replies
View Related
Apr 21, 2011
I'm trying desperatly to install Ubuntu Netbook Remix on my Asus Eee netbook. I've created an USB bootable stick. It boots. I get to the screen where I can choose the language and where I have the choice between "Try" or "Install". I choose Install. After that, I get to the screen about the preparation of the installation. It says I have enough disc space, that I'm successfly connected to the power and to the Internet. I click on next and... nothing happens! It stays for ever on that screen.
View 8 Replies
View Related
Feb 15, 2011
I am trying to install ubuntu netbook remix on my asus netbook.I created a USB drive from windows.On Save and Exit from BIOS setup, system boots from hard drive with Windows 7 OS.
View 3 Replies
View Related
Jul 20, 2010
I haven't been able to find anything really useful on google either. Was hoping you guys could point me somewhere or explain a process that might work. What I've tried so far is downloading the driver from ralink and trying to follow their procedure for getting it setup. Following the readme I get lost at step 3 and attempting to make it, I get:
[boardbox@niflheim ~]$ cd Desktop/2010_07_16_RT2860_Linux_STA_v2.4.0.0
[boardbox@niflheim 2010_07_16_RT2860_Linux_STA_v2.4.0.0]$ make
make -C tools
[code]...
but this hasn't fixed my problem either. I can see networks but I can't connect to anything, so kinda still stuck at square one.
EDIT: Turns out in frustration and absent-mindedness I didn't reboot and that fixed it.
View 1 Replies
View Related
Jan 7, 2010
I have Problem with connection Wireless.I can't install wireless adapter.Now i'm installed Backtrack3.How i can Configure wireless adapter.
View 2 Replies
View Related
Feb 1, 2010
I have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP.
I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( )
Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like:
[ 1.957161] [] rb_erase+0xd6/0x160
[ 1.957266] [] page_fault+0x25/0x30
Could it be something about this new video card having ddr3?
View 1 Replies
View Related
Jan 27, 2011
Just upgraded to a super sexy Asus 27" LED monitor. It's awesome, however ther are a few quirks I'm wondering if I just have to live with or if they're fixable. These may not be directly related to the monitor...hence posting here rather than hardware.Specs: Asus 27" LED VE278Q monitor. Nvidia graphics card. Dell 8100 w/ 8GB ram, 64-bit. Fedora 13 running Gnome.
The first quirk is that I have a VNC window open almost all the time and if I leave my cursor on the VNC window, the screensaver won't come on, even if no action has happened on the keyboard or mouse (or in the VNC window). It would be nice if the screensaver worked.
The second problem is that when I'm using the keyboard and/or mouse in the VNC window, apparently, the screensaver doesn't realize the keyboard is being used...and the moment I switch to a different window, up comes the screensaver.
I'm having what I think is a documented hardware issue probably related to the Nvidia driver: at infrequent times, often when I'm using GIMP or other graphics-intensive program, the screen will flicker and/or go completely black for a split second. Distracting as all hell, but not a show stopper. It does not appear to happen when I'm using the web or doing other non-graphic intensive stuff, so I'm guessing this is not the monitor itself, but rather the card or the drivers for it.
View 5 Replies
View Related
Feb 24, 2010
I'm booting from disc on a compaq presario F700. Somehow, I messed everything up and now it's not reading that I have an OS. Which was previously vista. Now, when I boot from disc and try to install no partitions come up. I did open the blasted thing to clean it not too long but as far as I know, nothing dislodged. It is a laptop, btw. So, my kneejerk reaction is that the hard-drive got damaged or knocked loose. I also tried using kill-drive to erase it so I could start fresh, also no Hard drive detected. So, I'm going to try that. In the meantime I have another issue. When booting from disc I can't seem to get the drivers for my wireless adapter to install. I have them. Madwifi for AR5001X but I don't know where to put them via terminal.
View 9 Replies
View Related
Jul 2, 2011
How to install wireless USB Adapter WUA-0603 ?
I have Ubuntu 10.04 LTS
View 3 Replies
View Related
Oct 20, 2010
F5D7050 connectivity
Dell GX, Kubuntu 10.04,
K 2.6.32, FF 3.6.1, Clear modem,
Netgear WiFi router
Just received network adapter and unable to install. Belkin service was useless. Moved computer, running point to point on the LAN. Searching for a compatible driver and/or means of installation. Poor connection with Clear and modem's on top floor, Belkin's a good option.
View 4 Replies
View Related
May 2, 2010
Installation of my wireless USB trendnet adapter
View 2 Replies
View Related
May 3, 2010
I have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
View 1 Replies
View Related
