Fedora Installation :: Transplanted Drive Won't Boot To X11/Gnome Desktop?
Aug 11, 2011
recently built a F14 x64_86 system on a dual core X64 AMD based box. Later I installed the drive in a dual Xeon dual core box. I have the os set to boot to run level 3 then after I login I run telinit 5 to get to X11-Gnome desktop.However, when I boot the xeon machine I am able to login and run shell commands, such as yum update, fdisk -l etc. But when I try to telinit 5 the process hangs, hitting the power button, the machine goes through it's shutdown script.
I haven't tried transplanting the drive back into the original machine. just to test it's integrity, but I suspect it not corrupted. Not sure this matters, but running it's nvidia's driver for the video card. I think I can also boot to nouveau, but not 100 % sure with out having to deinstall the nvidia binary. both boxes uses the same video card a nvidia 8800 gtfwiw, I can boot my i386 f14 usb thumb drives that have the generic video driver installed.
View 1 Replies
ADVERTISEMENT
Oct 2, 2010
I would like to replace my old 100gb boot drive in my server with a new SSD...for obvious reasons. So what is the best way to clone the existing installation (10.04 desktop) from the old boot drive onto the new SSD? I have read some guides online that suggest using the live CD and various software packages but most of them say it will only work if you are cloning to a disk of the same size or larger, nobody seems to address taking an installation from a larger volume down to a smaller one - in my case a 100gb IDE onto a 30gb SATA SSD.
As this is a datadump, the only drives I really care about are the various 1.0/1.5tb drives that actually store the data, the OS drive contains nothing more than the standard OS, samba/webmin and a few monitoring tools. So I guess it's not the end of the world for me to start fresh and install 10.10 next week, but I would like to know for the sake of this upgrade and future ones if anyone can be of assistance. basic specs if needed: Athlon64 X2 3800, 2gb DDR500, Asus A8N SLI Premium (Nforce 4/Silicon Image 3114R RAID controller). OS is on a 100gb IDE (WD1000BB-00C) and I would like to toss it on a Kingston 30gb SSD (SNV125-S2/30).
View 5 Replies
View Related
Feb 3, 2010
I had a request from one of my colleague that he would like to try my Fedora 12 installation which was set up recently. However, he said he would like to start with the KDE Desktop while my normal login uses the Gnome. Is it possible to have different desktops for different users (well I believe so)? If yes, I would be appreciated if some one will provide me guidance in doing so as I am quite new to Linux.
View 2 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Aug 12, 2011
I installed a fresh live CD version of Fedora 15 which has that new Unity desktop, but I also want the option of booting to the old gnome classic desktop session. So can I add that with the package manager, or just use terminal with yum install ?
View 3 Replies
View Related
Jun 11, 2009
I successfully installed fedora live CD KDE version on virtual PC. but I can't install the live CD Gnome desktop version. details: I just add vga=0x32D on boot, no problem booting after that. I am now log-in as live user, but I can't find the shotcut for installation on desktop "install to hard drive" but using the terminal, there's a file under Desktop, 'liveinst.desktop" I tried running it, graphical installation will appear, but during copying to hard disk, it says bad media.
View 1 Replies
View Related
Mar 24, 2010
i'm using Fedora 12, 32 bit, kernel 2.6.31.5-127.fc12.i686.PAE while using add-remove program to install programs, my desktop frezes, the keyboard becomes unusable, can't do anything so i have to do a hard boot.
View 4 Replies
View Related
May 29, 2011
Have just upgraded (14-->15) using the dvd option; installed the nvidia driver (I think) and am able to startx and get to the Gnome 3 desktop (Wallpaper and top "task" bar look correct)..But, the mouse and keyboard have absolutely no affect. No matter what I click on, or what keyboard combination I use, nothing happens..(Have spent the last 3 hours researching it; and just seem to be getting nowhere.. I can do anything I need to from the CLI; but am not sure what to do..
View 14 Replies
View Related
Jun 3, 2009
I just installed Fedora Core 9 on a older PC (Compaq Presario that dual boots Windows xp). It had a much older Fedora on it and I overwrote it. I did a basic install using 3 of the 6 discs and watched it say it installed Gnome. I remember from a few years back that Fedora just boots to the prompt after installation unless you *tell* it to boot to a gui environment.
View 2 Replies
View Related
Nov 4, 2009
I recently upgraded my computer and tried using same hard-drive in new one. Fedora 11 booted and allowed me to log-in. But system is un-usable as there are no Icons on desktop and no panels. While I know that initial installation is based on hardware profile of previous computer, is there any work-around to make it work without having to install fresh. Also, If I choose option "replace previous Linus version" from LiveCD, will that preserve my personal data and settings?
View 2 Replies
View Related
May 27, 2011
I'm running Fedora 15 with Gnome 3. I installed Gnome-Do using 'yum install gnome-do'. I opened it from the Terminal by typing 'gnome-do' but I keep getting an error message that says
Could not load desktop item: libgnome-desktop-2.so.17
Gnome-Do opens but it doesn't display any application I search for and when I try opening the Gnome-Do preferences, it quits.
I installed gnome-desktop-2.32.0-8.fc16.i686.rpm from here: [url] and then installed Gnome-Do. Everything works fine now.
View 1 Replies
View Related
Jun 26, 2011
I just installed Fedora 15 with the gnome desktop which looks like the android system for mobile phones, I installed wine which put the icons on my desktop but whenever I install a windows app it doesn't put an icon on my desktop for that particular application. How would I add an icon for those window apps so I can lunch them from the desktop, I don't know if you call that the desktop or just the program luncher either way how do I put an icon there so I can run those windows apps from there?
View 4 Replies
View Related
Jan 27, 2010
How to make my GNOME desktop auto recognize the NTFS partition of the USB drive.
On command line I can do the following perfectly:
Code:
which results
Code:
All files permission on the drive is 777. I can read, I can write, do whatever I want.
But in GNOME Desktop environment, when the USB drive is plugged-in, the partition is auto-mounted with other options:
Code:
All files permission on the drive is now 555. I can't write to it anymore. I saw a post earlier having similar mount result, but this one is USB drive though.
So how to configure GDE mount automatically with my intended mount options?
View 9 Replies
View Related
May 1, 2010
I upgraded to Lynx.When I plug in a USB drive, the drive icon no longer appears on my desktop.If I go to Places/Computer it shows up.And once I open it, the icon appears on the desktop.
View 1 Replies
View Related
Dec 5, 2010
I am not smart enough to figure out how to install Fedora 14 correctly. I have an older computer with 2 20gb drives. On the first drive (sda) I have Windows XP, and on the 2nd drive (sdb) I am trying to install Fedora 14. The catch is that I would like to put Grub and the MBR on the first drive so that when the computer boots, it asks whether to load Windows XP or Fedora. I know I have done it with Fedora 13 in the past, but have forgotten how to do it. How to accomplish this in Anaconda for Fedora 14?
View 2 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
Mar 17, 2009
This machine has two internal HDDs which are dedicated to Vista (ergh). For various reasons, I elected to use an external drive for the installation of Linux. When I installed Fedora, I didn't have an eSATA cable, so I installed it via USB. if I change the boot device so it boots off the USB drive, the machine apparently remaps the drive to BIOS drive 0. However, when Linux boots, it'll still be considered sdc. So far so good. However, when I plug in the eSATA cable and try to boot Linux that way, the machine will boot off the internal sda because the only available option is "Internal Hard Drive." (And yes, the eSATA is working properly.)
I obviously need to install GRUB on the first drive, and it will then let me choose between Vista and Linux. I've done this kind of thing before on other machines and haven't had to much of a problem. However, running 'grub-install /dev/sda' resulted simply in blowing away my Vista boot loader, and a Grub installation that would hang at a black screen. Which of course then resulted in a plethora of pain trying to fix it with Microsoft's deliberately pathetic engineering.What did I do wrong there? And incidentally, the external hard drive isn't always going to be hooked up, so I don't want to be dependent on it to get into Vista.
View 3 Replies
View Related
Jun 22, 2009
I just downloaded the Fedora11 LiveCD and booted it......it boots, but when it starts to load KDE, it takes a very long time, and it never ends. It just keeps on reading from the CD-ROM drive. I can see the GUI is loading, but the loading time is so long that the mouse sometimes freezes. My Config is 512MB of RAM and 2 IDE Hard Disks. Also note that I verified the image with SHA256, and even burnt the CD at two different speeds, one at 48X and the other at 16X. Still nothing. There has also been severe kernel panics on EXT4.
View 2 Replies
View Related
Jul 9, 2009
I have a drive... let's say SDA1 On that drive I do a F10 install.
Now I remove the drive and put another drive in and did F11 install on another drive in the SDA1 slot.
Now I put the other first drive in.
Now, F10 is on SDA1 and F11 is on SDB1.
What can I add to FSTAB and GRUB.CONF so I can choose which drive I want to use at boot time?
View 14 Replies
View Related
Dec 22, 2009
I know that several people have answered this type of question before, but I can't seem to find the information I need to get it working for me. According to my research what I want to do cannot be done. However, i'm sure there must be a way.This is my scenario - I will try to be as accurate as I can be to make it easier for poeple to help. I have a Sony Vaio PCG-141C laptop, the half sized old ones. It has a usb floppy drive that I can boot from. I have also got a usb cd-rom drive but the laptop simply will not boot from it! I have got the F12 cd images downloaded and on a usb hard drive.
I want to boot from a floppy disc, to load F12 from the cd images stored on the usb hard drive. Now with Redhat 9 you could use a floppy drive to do just this. However, F12, does not support it.
Is there a work-around that I could try. I have already tried Smart Boot Manager, but it won't detect the usb cd-rom drive. I have Redhat 9 installed on the laptop, and can mount the usb hard drive from terminal. Could I start the install process from here with the images stored on the external drive??Is there anything I can do, or am I doomed to never get past this.
View 6 Replies
View Related
Oct 14, 2015
I have debian8.2 installed in VMware 12 with gnome desktop as guest os.
It boot into gnome successfully. But it will not boot into CLI mode and recovery mode. While boot into CLI, It is stucked in a blank screen, no cursor, after long long boot log splash in the screen.
To boot into CLI rather than gnome, I just set default.target into multi-user.target for systemd. I checked the syslog for boot into CLI, found that systemd execute getty 1~6, but it seemed to no success log and it seem to no other log for systemd. Is it failed to getty?
I check the grapyical.target and multi-user.target in systemd, find multi-user.target is the only one target required by graphical.target. Multi-user.target can be execute successfully during boot into graphical mode, while it will not be successfully execute during boot into CLI mode. That's is so unpredicted. Is there something else I missed?
View 0 Replies
View Related
Feb 1, 2009
After going back & forth between win7b & F10 installs, I can't get both to live on the same hard disk for dual booting anymore. win7 complains about fedora's GPT disk being unacceptable for installation. win7 blows away fedora's GPT partitions when it installs. Fedora doesn't recognize win7 partitions when it installs. I can't specify exact partition boundaries with windows even if I know what they are, and I can't seem to find any info how to do it in parted either. I have win7 installed in partition 3 in a known location on disk, but if I reinstall f10 (again), it's going to blow away the win7 boot data on the disk. How do I tell grub where to find the chainloader thingy? Can that still even be used? win7 no longer uses ntldr, and I haven't found an updated procedure for this new boot method.
View 4 Replies
View Related
Dec 27, 2010
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies
View Related
Feb 5, 2011
i have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
View 6 Replies
View Related
May 3, 2011
I noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
View 3 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Aug 27, 2010
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
View 14 Replies
View Related
Jun 11, 2011
Back in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
View 5 Replies
View Related
Apr 30, 2011
I would love to go back to my Gnome Desktop, how can I do it?
View 7 Replies
View Related
Oct 24, 2009
I created a separate /home partition to share between F10 and F11. And, of course, the gnome settings conflict. I really don't need to go back to F10 and when I install F12 over it I will omit including the separate /home directory during the install set up and that will force F12 to create the /home Dir on the same file system. So, to clear up gnome settings for now, is the only way mean deleting the .gconf, .gnome* directories? This was recommended in another post back a few years ago.
View 2 Replies
View Related
