Fedora Installation :: Can't Proceed After Boot On An Install With Live Cd?
Jan 12, 2009
i have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.
View 1 Replies
ADVERTISEMENT
Feb 28, 2009
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
View 3 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Feb 12, 2010
No matter which ubuntu version at 95% through the install it will complain that grub failed to install.
I'm installing this on an HP XW6600 with hardware raid striped.
I can use the supergrub rescue CD to boot to ubutu after, but whatever I do doesn't seem to get grub installed.
Any ideas on how to proceed? I'm guessing I need to install grub from scratch.
View 3 Replies
View Related
Feb 20, 2010
The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
View 2 Replies
View Related
Jun 25, 2010
I use Ubuntu at work on multiple machines. I have instaled one PC ok (although had a few issues with the errno5 install error. Took out some RAM, installed, put RAM back, works). Now trying to reinstall on my main PC and having some very weird issues.When I try to boot off the CD it boots, says there was a problem and takes me into the desktop session, but that session wont actually load up properly. I think its something to do with gnome messing up the activity applet etc. Sometimes I get a blank grey box in the middle that looks like a half loaded error, othertimes it actually loads and tells me 'The panel encountered a problem while loading "OAFIID:GNOME_IndicatorApplet".'
Other times it asks me if I want to delete the applet or not, but clicking doesnt seem to do anything. mouse pointer works as normal but clicking anything doesntseem to do anything, or it seems to catch up 10 minutes laterBreifly managed to get into another TTY but then that locked up too after I tried 'killall gnome-panel'.I dont think the CD is the issue as the md5 checksum is correct, and my colleagues pc is on 10.04 using this CD. Please help, I dont want to be stuck on 9.10 forever
View 4 Replies
View Related
Sep 14, 2010
I installed a copy of Fedora 13 onto my HDD yesterday and everything went fine until, for some reason, it stopped working. (Got stuck at the white bar while booting up). Well, I wasn't sure what the problem was so I decided to run the live CD again (which *is* a good CD, unless it somehow managed to destroy itself since yesterday) and I get "Could not mount root filesystem," sleeping forever. Hm.I haven't changed any of the hardware, and all the connections seem to still be good, so, I dunno... Any ideas on what could be the problem? Thanks in advance for any input.:UPDATE:Now my computer simply displays a list of repeating errors, each one like:Quote:
ata1.00: failed commnad: read DMA
(...)
ata1.00: [ABRT]
View 1 Replies
View Related
Aug 17, 2010
I have made several live Cd's and img for my flash drive and tried to even preview Ubuntu before install, but nothing seems to be working. it makes it to the screen that says Ubuntu with the dots and the dots "cycle" then afew seconds later, weather cd or flash drive, everything just stops and my computer freezes. Tried nomodeset and everything i could find between here and google to no avail.
cant get past that load screen. Ive been lurking on the forum for days and finally got fed up enough to post this because im fresh and have no clue what im doing when it comes to this. all i know is i want something better than windows(lol) and Ubuntu seems like its right up my alley...user, my "skills" if you will, are better than most, but Linux.its like trying to reed Greek for me.Also, computer specs...Toshiba A505-S6025 4gb Memory Nvidia GeForce 310M (from what i read i will have trouble with this) Realtek RTL8191SE wlan (also will have problems with this)
EDIT: just ran live cd with virtual box and it started the demo of Ubuntu with no problem with no options(like nomodeset) checked off... apparently i think im doing something wrong when it comes to booting the other way...
View 2 Replies
View Related
Jul 30, 2009
I already know what the problem is, which is that I have an AGP Nvidia graphic card. When I try to boot the live cd it freezes. I've done some research and I've already tried using "nouveau.noagp=1" as a Boot Option from the live cd. But it says unknown boot option ignoring. And it still fails to boot up. Im anxious to begin using Fedora.
When it is trying to boot...it also says IO APIC resources could not be allocated.
View 11 Replies
View Related
Jun 2, 2010
I get it to boot to the loading screen and it gets to what looks like 99% loaded and it just sticks, i have tried multiple downloads, different cds and did "verify and boot" just to be sure and it just sticks and does nothing?
Just read up that it's an issue for a lot of others as well, so i'm downloading the dvd to do a straight install from
View 14 Replies
View Related
Sep 1, 2011
I'm trying to install using live USB stick. The F15 live CD was downloaded and copied to the USB stick via liveusb-creator. The target machine has Award BIOS v6.00PG, I set the first boot device to USB-HDD. When I tried to boot it from the machine, I get the following error:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found!
[code].....
View 1 Replies
View Related
Jan 24, 2010
When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.
I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.
What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?
View 1 Replies
View Related
Jul 15, 2010
I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
View 1 Replies
View Related
Oct 12, 2010
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
View 4 Replies
View Related
Jul 30, 2009
I'm trying to install F11 in my new laptop [URL] and I'm unfortunately about to give up, but I want to give this option. What I want to do is use the live cd (on a usb stick) to boot on a text-only session. Supposedly the way to do that is type "linux text" on the boot prompt but the problem is that I can't even get there. After booting I get the grub menu with two options: boot, and verify and boot. Hitting esc doesn't bring me to the boot prompt. I can get to the grub menu, but I'm not sure what to do from there. And I can edit the boot and kernel options, but I'm not sure whether that will allow me to log in a text-only session.
View 4 Replies
View Related
May 28, 2010
I currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
View 12 Replies
View Related
Jun 18, 2010
I Installed Ubuntu x64 10.04 on an Hp HDX 16 with Nvidia 9600m video card. I am having an issue that the screen is very dim and it gives one a headache to read it for long periods of time, especially in a bright room. I can adjust the contrast and brightness from the nvidia control panel but I can never get it just right it will either look washed out or just muddy. Everything was fine in Windows 7 a day or so ago. Is this a backlight issue?
Any suggestions on how to proceed?
View 1 Replies
View Related
Aug 7, 2011
I'm using Fedora 15 and i want to install Ubunto 11.04 using live usb and then the two linux systems to be on my computer.note:first fedora 15 is to be installed
View 1 Replies
View Related
Jun 1, 2010
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies
View Related
Aug 27, 2010
I have two hard drives in my laptop, they are NOT raid configured. I installed 32-bit Ubuntu on the second HD, third partition: Sdb3. I then installed 64-bit Windows 7 on the same hard drive, first partition: Sdb1 (Sdb2 is formatted NTFSd willusedasstorage).Windows installed fine.Then I installed Windows in 32-bit on the first hard drive, first partion: Sda1. Sda2 will again be used as storage.When I boot up, Windows boot manager gives me the option of the two windows OS's to install (but not Ubuntu of course).I wanted to boot into the Live CD, where I would reinstall grub, assuming it would recognize my two Windows, and I could boot into any of the three OS's upon start-up.The Ubuntu Live CD, will act as though it is going to boot, bringing me up to the loading screen, then it cuts out to "busy box" and I am not sure what to do. Buys box is almost like a command prompt, but I don't understand the commands.
View 1 Replies
View Related
Mar 11, 2009
I'm making life difficult for myself. Summary, I have a laptop with F10 installed on a portable harddrive (sdb 1-3, i.e., no logical volume) Works great, no complaints so I guess this reduces to a grub question; how do I edit grub.conf to boot an iso on sdb4? Fedora10.iso for example.
View 1 Replies
View Related
Jun 11, 2009
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies
View Related
Jan 1, 2010
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
View 2 Replies
View Related
Oct 8, 2009
I want to dual boot Fedora 11 and Windows Vista, and the last time I tried I deleted my Windows Vista (big no no). So, I've made a partition of about 30GB, and I'm trying to go through the installation (from the live CD), but I don't know quite what to do? If I select Shrink existing disk, it doesn't let me do it for any amount that I put in, by the way.
View 14 Replies
View Related
Jan 15, 2011
Well Fedora 14 sees my Emu soundcard right out of the gate with the live cd! I have windows 7 installed right now. I would like to install Fedora 14 from the live cd to have a duel boot setup. What I am trying to do is just give Fedora 60GB of the drive and keep the rest for Winows. How can I go about this with the live cd. I am sure it's been covered to death but I couldn't really find it.
View 14 Replies
View Related
Sep 12, 2009
I am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.
View 5 Replies
View Related
Apr 3, 2011
I have a Toshiba a105-s2236 laptop and am trying to install Fedora 14. Is there any way to tell Fedora not to look for the pcmcia slots on boot? My live CD is freezing at the point where it tries to probe the pcmcia socket IO port.
I tried adding the 3 to get to a console, but that fails as well. I had to add acpi=off to the kernel boot args to even get it to go this far.
Even using the nopcmcia option, it still tries to probe the socket's IO port.
View 7 Replies
View Related
Jul 8, 2009
I try to install by clicking "Install to Hard Drive" icon on the desktop, but it's not responding. And then i try '/usr/bin/liveinst' and i got the following error :
Code:
umount: /media/*: not found
07:27:29 Starting graphical installation...
Traceback (most recent call last):
File "/usr/sbin/anaconda", line 876, in <module>
[Code]....
View 9 Replies
View Related
Sep 11, 2009
This usb-memory-stick loaded wtih fedora11 and 4GB space for persistence runs nicely
When I click install icon and choose "shrink other partitions" or "use free space for installing", it aborts.I've tried installing on C hard drive and on 300GB-usb-disk with lots of free space; still won't work
View 1 Replies
View Related
Nov 12, 2010
I cant install fedora on my pc from live cd because my hard disk has many bad sectors anyone knows how to fix this?
View 14 Replies
View Related
