Fedora Installation :: Cannot Boot F15 Live USB?
Sep 1, 2011
I'm trying to install using live USB stick. The F15 live CD was downloaded and copied to the USB stick via liveusb-creator. The target machine has Award BIOS v6.00PG, I set the first boot device to USB-HDD. When I tried to boot it from the machine, I get the following error:
SYSLINUX 4.02 2010-07-21 CHS Copyright (C) 1994-2010 H. Peter Anvin et al
ERROR: No configuration file found
No DEFAULT or UI configuration directive found!
[code].....
View 1 Replies
ADVERTISEMENT
Jul 30, 2009
I already know what the problem is, which is that I have an AGP Nvidia graphic card. When I try to boot the live cd it freezes. I've done some research and I've already tried using "nouveau.noagp=1" as a Boot Option from the live cd. But it says unknown boot option ignoring. And it still fails to boot up. Im anxious to begin using Fedora.
When it is trying to boot...it also says IO APIC resources could not be allocated.
View 11 Replies
View Related
Jun 2, 2010
I get it to boot to the loading screen and it gets to what looks like 99% loaded and it just sticks, i have tried multiple downloads, different cds and did "verify and boot" just to be sure and it just sticks and does nothing?
Just read up that it's an issue for a lot of others as well, so i'm downloading the dvd to do a straight install from
View 14 Replies
View Related
Jul 30, 2009
I'm trying to install F11 in my new laptop [URL] and I'm unfortunately about to give up, but I want to give this option. What I want to do is use the live cd (on a usb stick) to boot on a text-only session. Supposedly the way to do that is type "linux text" on the boot prompt but the problem is that I can't even get there. After booting I get the grub menu with two options: boot, and verify and boot. Hitting esc doesn't bring me to the boot prompt. I can get to the grub menu, but I'm not sure what to do from there. And I can edit the boot and kernel options, but I'm not sure whether that will allow me to log in a text-only session.
View 4 Replies
View Related
May 28, 2010
I currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
View 12 Replies
View Related
Jun 1, 2010
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies
View Related
Jan 12, 2009
i have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.
View 1 Replies
View Related
Mar 11, 2009
I'm making life difficult for myself. Summary, I have a laptop with F10 installed on a portable harddrive (sdb 1-3, i.e., no logical volume) Works great, no complaints so I guess this reduces to a grub question; how do I edit grub.conf to boot an iso on sdb4? Fedora10.iso for example.
View 1 Replies
View Related
Jun 11, 2009
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies
View Related
Jan 1, 2010
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
View 2 Replies
View Related
Oct 8, 2009
I want to dual boot Fedora 11 and Windows Vista, and the last time I tried I deleted my Windows Vista (big no no). So, I've made a partition of about 30GB, and I'm trying to go through the installation (from the live CD), but I don't know quite what to do? If I select Shrink existing disk, it doesn't let me do it for any amount that I put in, by the way.
View 14 Replies
View Related
Feb 28, 2009
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
View 3 Replies
View Related
Jan 15, 2011
Well Fedora 14 sees my Emu soundcard right out of the gate with the live cd! I have windows 7 installed right now. I would like to install Fedora 14 from the live cd to have a duel boot setup. What I am trying to do is just give Fedora 60GB of the drive and keep the rest for Winows. How can I go about this with the live cd. I am sure it's been covered to death but I couldn't really find it.
View 14 Replies
View Related
Sep 12, 2009
I am running Vista on my C: drive and I just got Fedora 11. I planned to dual boot Vista and fedora 11. I Downloaded the Live CD from the site (680 +- MB) and burned the files IN the .iso file to an empty DVD and CD. Shrank my D: drive and now have about 27 GiB wort of unpartitioned space. I booted from the Live CD. everything went OK until i chose Boot from the Boot Menu that came up. First it took me to a screen with the following message:
ACPI: expecting a [reference] package element found type 5. and then in went on to boot normally. Then when it reached the user login screen, I found that my mouse and keyboard were'nt responding and that there was no lights on any of the keys. I checked the USB cables and did a hard shutdown and booted from the Live CD again, but the problem persists.
View 5 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Apr 3, 2011
I have a Toshiba a105-s2236 laptop and am trying to install Fedora 14. Is there any way to tell Fedora not to look for the pcmcia slots on boot? My live CD is freezing at the point where it tries to probe the pcmcia socket IO port.
I tried adding the 3 to get to a console, but that fails as well. I had to add acpi=off to the kernel boot args to even get it to go this far.
Even using the nopcmcia option, it still tries to probe the socket's IO port.
View 7 Replies
View Related
Apr 13, 2010
I just bought a new laptop--Toshiba, AMD processor and ATI video card, i think--and i can't get Linux installed!With Fedora, the Fedora icon appears, first pure white, then it fills in, and finally the Fedora icon shows properly, but it doesn't go any further than that. I woke up in the morning and found it hadn't made any progress since last night. The same story for booting with USB or CD.When i press ESC, the screen goes black with the fallowing text:udevd-work[196]: '/sbin/modprobe -b acpi:LNXVIDEO:' unexpected exit with status 0x0009
I am under the impression that live versions of Linux don't mess with the video card since the drivers may not be installed, and so i believe that this has nothing to do with my ATI card. Is this correct?I also tried to install Ubuntu, but the problem there was that it would spew text on to the screen, resembling in my mind a call stack, and would seem to freeze on this line:[2.473359] [<c0104087>] kernel_thread_helper+0x7/0x10I almost don't care what distro i end up using, but Fedora is indeed my favorite thus far. So, the most appreciated help would be for getting Fedora working, but if anyone can suggest another distro, that is acceptable.
View 9 Replies
View Related
Aug 1, 2009
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
Jun 19, 2010
I'm aware of the issues of the ACPI that Toshiba laptops have...
Unfortunately I found out after I bought the laptop.
Auto-boot initiates, and then the screen freezes with this text:
View 10 Replies
View Related
Nov 9, 2010
My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==
[code]....
View 3 Replies
View Related
Oct 13, 2010
I downloaded Ubuntu 10.10 2 days ago and tried to instal it on my:HP EliteBook 8540wIntel Core i7 740QMIntel QM57 Express8GB RAMnVidia Quadro FX 1800 with CUDA (1GB)Of course I went 64bit, but the Live CD wouldn't start. Instead I get some weird artifacts on my screen.I can see bits of my Windows-background with taskbar and some of the windows I was using earlier before restarting, like the download manager. If cold boot my PC I see black and white boxes with coloured dots on them.
Thus I thought of an issue with the 64bit architecture and possibly the grafics card too (the artifacts are clearly remnants of data from the VRAM)I tried the same with the 32bit version and got the same issue (indicating NO issue with 64bit, at least not directly).In the end, I installed Ubuntu from the alternate 64bit CD and now am stuck with a non-working installation of Ubuntu.I get some kind of error concerning pcieport (probably PCI Express).When I install Ubuntu on Virtualbox through Windows 7 however, I don't get any kind of issue (I'd still like to be able to run Ubuntu natively)Any idea on how to fix the problem?PS: I'm not very experienced with Linux, so if you ask me to go into console mode, please be detailed on what command I should input.
View 2 Replies
View Related
Feb 19, 2015
Ok so I wanted to try out Debian, so I got the wheezy live image (gnome) via torrent. The problem is after I write the image to the USB, the computer cannot boot from it. It doesn't even display the USB in the boot menu. I've tried many ways of writing the image like dd, powerISO, UUI, imagewrite (not sure if that was the correct name) etc. Strangely enough, it works on a virtual machine via Plop Boot Manager, but not my actual PC.
View 8 Replies
View Related
Jan 6, 2010
Hey I have a laptop thats being stubborn and refuses to boot the xubuntu live cd like it cannot read the disc, while it will boot a FreeDos live cd. I can put the xubuntu CD in while in freedos and view it in as the X directory, is there anyway that I can try and boot the live CD from the FreeDOS interface
View 2 Replies
View Related
Feb 17, 2010
I tried installing Ubuntu 9.10 on an older computer. I figured since it was not that powerful, I'd try running it from the Live CD to see if it was acceptably fast. Of course, I forgot that I had put in a pair of unformatted 40 GB hard drives, so the Live CD didn't like those because there were no file systems to access. So I figured I would just reboot and install it. One problem: my PC acted as if there were no CD in the drive. So I tried a Windows XP CD, but I got the same result.
I reset the configuration data in my BIOS and I set the drives up correctly in there, made sure the boot order was right, and all of that. I was wondering if anyone has experienced something like this before, and if there's anything I can do before I try replacing the CD-ROM drive with another one. Computer info: Gigabyte 7IXE4 mobo with Athlon 1.2 GHz, 512 MB RAM, 2x 40 GB Seagate Barracuda HDs, not sure what the video card is (I'll worry about that one when I get there)
View 2 Replies
View Related
Feb 23, 2010
I cannot get past the login screen. I tried entering through it but that fails, it keeps returning me to the login. Is there a generic login for the Live CD to test drive UBUNTU?
View 4 Replies
View Related
Feb 24, 2010
I had issues installing Ubunut 9.10 on my Asus UX50 laptop but it installed perfectly on my tower. When installing 9.10 on my laptop I would get the live disc menu to try or install etc. Whenever I installed I got a big black screen for long lengths of time (each time varied from 15 minutes to 5+ hours), then on occasion I would get the glowy white Ubuntu logo, then if I was lucky, I would get scrolling code. It would scroll and scroll then stop. After the code stopped I would get the nice little blinking curser. I can type all types of fun things at this black screen but nothing seems to work.
I have tried 4 different CDS to no avail, my tower had the OS installed by one of the same discs.
I am successfully running 9.04 on this laptop.
a command of : lspci
gives me
Quote:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[Code].....
From what I understand, my nVidia card may be the issue. So I have tried to boot in safe graphics mode and this also does not work. Safe mode directly delivers me to my black screen with my blinking curser.
I have also checked my drivers and I have no proprietary drivers installed.
Since I have 9.04 installed successfully does any one think that upgrading from Upgrade Manager would be successful?
View 9 Replies
View Related
Apr 9, 2010
My notebook is an HP Envy 15 (Core i7 720QM, Intel DMI Host Bridge, PM55) I have 2 ISO files, Ubuntu Karmic 9.10 and Ubuntu lucid lynx 10.04, both have correct md5sums, i burned each on cd's and flash usb disks ( using unetbootin and lili usb tool ). However i never had a successful boot, i always reach : (initramfs): Unable to find a medium containing a live file system.
Bios of notebook has no settings to tweak regarding HDD Could this be a sata issue anyway ? I tried searching for this issue on the forums but all the posts were having burn problems, I also tried the flash usb disks on a desktop machine and they boot properly with no problem.
View 9 Replies
View Related
May 4, 2010
I'm trying to get a persistent live usb of ubuntu lucid, with usb creator. When trying to boot, it will just display "boot error". So I clean the USB key, re-installed everything. Still the same. Then I try on laptop, and surprise, it works. So i restored default on the desktop's BIOS. And updated BIOS.No changes.
View 9 Replies
View Related
May 23, 2010
I am trying to boot the latest Ubuntu/Kubuntu 10.04 Lucid Lynx but im facing the same problem. The scrolling dots appear but then when its supposed to load X, no display on my monitor.. My monitor shows no signal.I am getting this bug on ubuntu, kubuntu and even linux mint which is a spinoff of ubuntu. Is there no way for me to boot the live cd using safe graphics mode or something? Same error when trying to install using wubi.
View 4 Replies
View Related
