Ubuntu Installation :: Can't Boot Live CD After Windows 7 Double Install (Busy Box Pops Up)?

Aug 27, 2010

I have two hard drives in my laptop, they are NOT raid configured. I installed 32-bit Ubuntu on the second HD, third partition: Sdb3. I then installed 64-bit Windows 7 on the same hard drive, first partition: Sdb1 (Sdb2 is formatted NTFSd willusedasstorage).Windows installed fine.Then I installed Windows in 32-bit on the first hard drive, first partion: Sda1. Sda2 will again be used as storage.When I boot up, Windows boot manager gives me the option of the two windows OS's to install (but not Ubuntu of course).I wanted to boot into the Live CD, where I would reinstall grub, assuming it would recognize my two Windows, and I could boot into any of the three OS's upon start-up.The Ubuntu Live CD, will act as though it is going to boot, bringing me up to the loading screen, then it cuts out to "busy box" and I am not sure what to do. Buys box is almost like a command prompt, but I don't understand the commands.

View 1 Replies


ADVERTISEMENT

Ubuntu :: Message Pops Up While Trying To Install Inside Windows?

May 2, 2011

messege pops up while trying to install inside windows?

View 1 Replies View Related

Ubuntu :: Screen Pops Up Asking Boot Or Install?

Jan 27, 2011

I built a new pc with an intel atom processor and 1Gb Ddr2 ram with on board sound and graphics. When i try to intal or boot live (from flash drive) The screen pops up asking boot or instal. Whether i choose either/or i recieve an error on my monitor saying input not supported. I got a similar error when i tried an older monitor. My current monitor is an aoc lcd screen (not sure of model no.)

View 14 Replies View Related

Ubuntu Installation :: Won't Boot From Live CD In Windows XP

Jul 31, 2010

I'm trying to boot with my Lucid live CD on my Windows XP Pro so I can dual boot my system. I get to a black screen with a little rectangle at the bottom next to a a little guy in a circle and then suddenly my monitor goes to sleep and nothing I do can wake it back up.

I know the CD works because I used it to dual boot my Windows Vista computer. how to make the boot work so I can install Ubuntu?

View 1 Replies View Related

Ubuntu Installation :: Use Current Live CD To Allow To Boot Into Windows In Situation?

May 13, 2011

alrighty, long story short, I screwed up. I had installed a copy of ubuntu 9.1 to my sda1 partition and a copy of windows 7 to sda2 and it worked pretty well, but after needing to change the partitions around, I deleted sda1 and did a wubi install. I forgot to adjust the mbr before deleting the ubuntu install and my live CD is still running ubuntu 9.1 (think that's grub 1.5) and I can't update the live CD, as my only functioning OS is currently running off it. I suspect, therefore, that the mbr is still pointing to a now non-existant partition to find the boot files. So, in short, how do I use my current live CD to allow me to boot into windows in this situation? my current partition table is sda2: windows 7/wubi, sda1: media/backups

View 2 Replies View Related

Ubuntu Installation :: Install From Windows Or Other Live Cd

Apr 29, 2011

I'm currently running Ubuntu 10.10 and wish to do a clean installation since it has become very cluttered with programs (I had the ooh, that looks like a cool free program I can download and then never use it again syndrome for a while). Since I've been doing some sound stuff with my computer, I decided to try Ubuntu Studio. Anyway, I am at college and do not have any cds available to be able to burn the image on. Is there a way to install Ubuntu onto my current partition (yes, I want to back everything up and erase what is on this partition) without burning the .iso to a disk. I have a Ubuntu 10.04 live disk and a Windows 7 partition on my hard drive. Is this possible with what I have and can anyone give me instructions or link me to something showing how? (I googled for a bit, but must have been missing the magic keywords if it's out there.)

View 3 Replies View Related

Fedora Installation :: Double Boot 12 With Ubuntu 9.10?

Jan 21, 2010

I have Ububtu installed (9.10) which uses Grub2. How can I double boot Fedora 12 with Ubuntu 9.10?

View 12 Replies View Related

Ubuntu Installation :: Install Xubuntu On Usb But Boot From Live-cd?

Feb 20, 2010

The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.

Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?

View 2 Replies View Related

Ubuntu Installation :: 10.04 Wont Boot To Live Or Install?

Jun 25, 2010

I use Ubuntu at work on multiple machines. I have instaled one PC ok (although had a few issues with the errno5 install error. Took out some RAM, installed, put RAM back, works). Now trying to reinstall on my main PC and having some very weird issues.When I try to boot off the CD it boots, says there was a problem and takes me into the desktop session, but that session wont actually load up properly. I think its something to do with gnome messing up the activity applet etc. Sometimes I get a blank grey box in the middle that looks like a half loaded error, othertimes it actually loads and tells me 'The panel encountered a problem while loading "OAFIID:GNOME_IndicatorApplet".'

Other times it asks me if I want to delete the applet or not, but clicking doesnt seem to do anything. mouse pointer works as normal but clicking anything doesntseem to do anything, or it seems to catch up 10 minutes laterBreifly managed to get into another TTY but then that locked up too after I tried 'killall gnome-panel'.I dont think the CD is the issue as the md5 checksum is correct, and my colleagues pc is on 10.04 using this CD. Please help, I dont want to be stuck on 9.10 forever

View 4 Replies View Related

Ubuntu Installation :: Can't Install/boot From Live Cd Or Flash Drive

Aug 17, 2010

I have made several live Cd's and img for my flash drive and tried to even preview Ubuntu before install, but nothing seems to be working. it makes it to the screen that says Ubuntu with the dots and the dots "cycle" then afew seconds later, weather cd or flash drive, everything just stops and my computer freezes. Tried nomodeset and everything i could find between here and google to no avail.

cant get past that load screen. Ive been lurking on the forum for days and finally got fed up enough to post this because im fresh and have no clue what im doing when it comes to this. all i know is i want something better than windows(lol) and Ubuntu seems like its right up my alley...user, my "skills" if you will, are better than most, but Linux.its like trying to reed Greek for me.Also, computer specs...Toshiba A505-S6025 4gb Memory Nvidia GeForce 310M (from what i read i will have trouble with this) Realtek RTL8191SE wlan (also will have problems with this)

EDIT: just ran live cd with virtual box and it started the demo of Ubuntu with no problem with no options(like nomodeset) checked off... apparently i think im doing something wrong when it comes to booting the other way...

View 2 Replies View Related

Fedora Installation :: Can't Proceed After Boot On An Install With Live Cd?

Jan 12, 2009

i have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.

View 1 Replies View Related

Ubuntu Installation :: 9.10 Video Fails On Boot - Install - Upgrade And Live CD

Jan 24, 2010

When I ran the distribution upgrade from 9.04 in update manager, my screen went blank on reboot and will not recover. Every time I reboot, screen goes blank. I cannot press CTRL-ALT F1 - F6 to gain access to text shells.

I tested booting from the 9.04 live CD and it works fine. So I downloaded the 9.10 live cd on another computer and booted it on the disabled system. Same exact problem on the live CD that I had upon installation: on boot screen goes black and cannot access text shells.

What can I do next to get out of this short of going back to 9.04, which has problems that I do not want to live with?

View 1 Replies View Related

Ubuntu Installation :: Remove Install Option On Boot Custom Usb Live?

Jul 15, 2010

I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.

I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.

The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.

How can I remove that window on boot?

I want to boot directly on desktop...that way will be perfect!

View 1 Replies View Related

Ubuntu Installation :: 10.10 Live Cd Worked Flawlessly Install Hangs At Boot?

Oct 12, 2010

My live cd worked flawlessly.

After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.

Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.

Interestingly, the squares do not cycle until I hold down the power button.

Searching for "10.10 boot" somehow returned zero results. ??

View 4 Replies View Related

Fedora Installation :: Live KDE CD Install : How To Select Boot From /dev/hda4

Feb 28, 2009

I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.

I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.

There's an option in the Live KDE CD boot install, which allows one to select:

boot from hard disk:

Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?

P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.

View 3 Replies View Related

Ubuntu Installation :: Grub2 Can't Load Window 7 After Recovered Grub2 Using Live Cd To Boot Windows 7

Mar 7, 2010

i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.

Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.

sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5

[Code]....

View 3 Replies View Related

Fedora Installation :: Disk Boot Failure After Fresh Install From Live CD.12?

Feb 15, 2010

I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.

System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller

other items

All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.

The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.

View 2 Replies View Related

Ubuntu Installation :: Cannot Install Or Boot 10.10 (dual Boot With Windows 7)

Oct 19, 2010

I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.

View 1 Replies View Related

Debian Installation :: Get Grub2 To Boot Up Properly But "xputs" Error Pops Up And Drops To The Recovery Prompt

May 4, 2011

I switched over from Ubuntu because I realized Ubuntu sucks now (lol), but anyways... Now I'm trying to get Grub2 to boot up properly, but this "xputs" error pops up and drops me to the recovery prompt. I tried the grub-install dev/sda and all it did was recognize my Windows 7 OS (as Vista) and added it to the bootloader list and didn't fix the "xputs" issue.

I heard that doing a chroot is the most effective solution. Forgive me, but I don't know what "chroot" means or how effective it is. I can specify more information about where the OS is if needed. I have the boot flag set to the Debian OS at the hd(0,5) or sda5 I think, and Windows is at sda1 (I think). I just want to make sure I can fix this without damaging Windows, and I'll try to get more information.

Right now, I can only get into Windows or Debian with UBCD and Grub2 Super Disk and I know that sometimes Parted Magic could orderly mount the disks differently, so I don't know if it was sdaX or sdbX, but probably sdaX. I'll check again.

View 1 Replies View Related

Ubuntu :: Network Authentication Windows Pops-up Only To Disappear 0.1 Seconds

Dec 6, 2010

Morning, just installed lubuntu but having problems connecting to the wireless network. I find the network alright, however, the network authentication windows pops-up only to disappear 0.1 seconds later not giving me time to enter the network-code.

View 1 Replies View Related

Ubuntu :: Tring Of Commands Pops Up When Try To Boot Up?

Jun 19, 2010

this string of commands pops up when i try to boot up linux in any mode.fsck from util-linux-ng 2.16/dev/sda5:clean, 207703/1966080 files, 1500210/7859793 blocks (check in 2 mounts)i have no idea about computer stuff so

View 2 Replies View Related

Ubuntu :: Possible To Use Live Cd To Boot On Windows Machine

Feb 19, 2010

is it possible to use a live cd to boot on a windows machine then scan with clam av if so how would you load AV, would it be possible to have AV on the same cd or would a seperate usb work? & not install it but use via cd/usb

View 3 Replies View Related

Ubuntu Installation :: Windows 7 Will Not Boot After 10.04 Install?

Jun 28, 2010

I installed Ubuntu on my HP Laptop. The laptop had 4 partitions, one of them called HP TOOLS. I thought i didnt need this, so i simply deleted it so i could install Ubuntu. I had not made any system images so i couldnt restore it if i had any problems. After I had installed ubuntu, i just wanted to boot into windows to make sure everything was right..IT WASNT..It failed to boot at the Starting Windows screen, and it took me to an "Insert a Windows Repair disk page"So i downloaded a windows 7 repair disk, and popped it in to the machine. The system repair didn't recognize any problems, and it just said restart the machine and everything would be fine.

View 3 Replies View Related

Ubuntu Installation :: Can't Boot Into 10.04 After Windows XP Install

Oct 1, 2010

I have two hard disks: 160GB and 1TB. I had Ubuntu 10.04 installed on the 1TB drive (sdb). Then I installed Windows Xp on the 160GB drive (sda) following which I could no longer boot into Ubuntu (as Windows XP boots straight away). I have already tried to repair GRUB2 using the Live CD using the commands:

# fdisk -l (shows sdb5 to be the 'Linux' partition)
# mkdir /media/sdb5
# mount /dev/sdb5 /media/sdb5
# grub-install --root-directory=/media/sdb5 /dev/sdb

The above procedure shows success but I still don't get the GRUB menu.

View 8 Replies View Related

Ubuntu Installation :: Cannot Boot Into Windows After 10.10 Install?

Dec 16, 2010

I had Windows 7 installed on a 640GB Hard Drive and was using Wubi to try out Ubuntu , I tried to install Ubuntu as a dual boot option but I am now unable to boot into Windows .The output of sudo fdisk -l is

#Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

[code]...

View 4 Replies View Related

Ubuntu :: Boot.ini Failed - Can't Mount Windows Partition From Live Usb

Jan 17, 2011

The boot.ini file for windows fail(reason unknown) and now i cant boot to any installed OS. Used Ubuntu live from usb to explore the disks, but as i tried to mount the W�ndows partition it failed..

Code:

# mount -t ntfs-3g /dev/sda /media/c/
ntfs_mst_post_read_fixup: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument
Record 0 has no FILE magic (0xffffffff)

[code]....

View 6 Replies View Related

Ubuntu Installation :: Does Windows 7 Install Remove Multi Boot

Mar 31, 2010

I plan to clean install Windows 7 on my system ( currently windows XP ). At the moment I have Windows XP professional together with Linux Ubuntu and I want to keep using Ubuntu. When I do the clean install for Windows 7 Professional, does it leave the multi-bootloader in place? If not, what should I do to bring the multiboot-loader back? I have a CD of Ubuntu 9.10.2.6.31.14. My installed Ubuntu is version 9.10.2.6.31.18.

View 6 Replies View Related

Ubuntu Installation :: Forcing Windows 7 Boot In Wubi Install (9.10)?

Apr 14, 2010

I recently did a Wubi install of 9.10 on my netbook that initially ran Windows 7 Starter. I wanted to speed up the booting process so I went into Windows and set the OS selection list waiting time to be 0 and the default OS to be ubuntu. I did this assuming that there is a way to force OS selection list to be brought up during boot; I think I was wrong.So now, I'm stuck booting directly into 9.10 (not even a full install!). Is there a way to either modify the Windows boot file to reset the selection list timer or to force the list to be brought back out?

EDIT: I should note that editing the grub files within the wubi install would only make changes to the GRUB loader, which has no effect on the actual Windows loader.

View 3 Replies View Related

Ubuntu Installation :: Windows Install - No Boot Screen On Reboot

Apr 25, 2011

Using Ubuntu and any Linux OS. I installed Ubuntu using the Wubi installer. Everything went fine. When the install wizard completed and asked to Reboot Now, I did. When my computer rebooted, the Windows Boot Manager doesn't appear and it goes straight to Windows.

I'm using 32 bit Vista and have an AMD Athlon X2 Dual Core Processor 5000+. When using Wubi, the download defaults to the AMD 64 version and that is what I have installed.

View 3 Replies View Related

Slackware :: L 99 99 99 Pops Up - Fatal: Create /boot/map: No Such File Or Directory

Mar 4, 2011

Im sure that this issue is pretty old and you get some results from forums when you google it, but I cant seem to find the solution : When I boot my system ( its duel boot , win7 / Slackware 13.1 ) the message : L 99 99 99 pops up. I know this has to do with the MBR, When I looked online this is what people were told to do:

[Code]///

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved