Fedora Installation :: Black Screen Displays After NVidia Splashscreen
Dec 28, 2009
Issue: Black screen displays after nVidia splashscreen.
History: I performed a clean install of Fedora 12. I performed NVidia driver "GEForce 4 and below" install for a PAE kernel as found here:[URL]..I kept a log of each command in the order performed:
[Code]...
Well, I just got back from the Pepsi Center after watching the Denver Nuggets NBA basketball team look silly against the Dallas Mavericks. 4.5 hours later and I still have a black screen. Was it Einstein who said, "it is insanity to do the same thing, the same way, over and over and expect a different result"? I feel I will been testing that hypothesis soon.
View 14 Replies
ADVERTISEMENT
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
May 24, 2011
Whenever I use the function hibernate or sleep - or just generally close my lid on my laptop, my laptop displays a black screen when I open the lid again - though it is turned on.
Basically, it hibernates/sleeps the laptop when I close the lid. When I open the lid though, it turns on the laptop, but brings me a black screen.
Code:
View 3 Replies
View Related
Feb 11, 2010
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies
View Related
Jul 24, 2009
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 Replies
View Related
Sep 23, 2009
NVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).
This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.
Is there a way to fix it or at least, recover from a broken video card driver ?
View 4 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
Nov 8, 2010
I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies
View Related
May 18, 2011
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies
View Related
Mar 8, 2011
My screen displays everything in a very wide but also very short way. When i click on (X Server Display Configuration) NVIDIA X Server Settings
I get this:
View 1 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
Dec 24, 2009
I had a fully working Nvidia driver setup in FC 12 with no problems using an old LG monitor (LCD panel) on a VGA connection. I have just replaced the monitor with a newer Dell model that has a DVI connection. I plugged it in and got nice Post Screen, FC 12 boot progress display but when it got to displaying the login screen it went black.
Ctrl +Alt+F2 took me to a command prompt where I can type commands no problem. If I change the driver to the Nouveau (and Chattr +a the xorg.conf file) I get a lovely gui. So far nothing I have tried has let me use the Nvidia driver. I have searched around Google and tried nvidia-xconfig, system-config-display, livna-config-display xrandr (which fails to work at all) but so far I have got no where.
View 5 Replies
View Related
Feb 5, 2011
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies
View Related
Mar 6, 2010
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies
View Related
Jan 25, 2010
After installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies
View Related
Jul 28, 2010
I have Asus N61jv laptop with optimus, and i use ubuntu 5-6 months, i know that i can't use my nvidia graphic card, today ubuntu offered to install nvidia drivers and I accidentally clicked, after restart i see only black screen, can someone explain me how to get back to a previous state, i found some topic with this solution "except booting to a live cd and disabling gdm.". How can i fix this problem, i have important data on ubuntu?
View 3 Replies
View Related
Nov 29, 2010
I've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
View 3 Replies
View Related
Sep 15, 2010
After I upgraded F11 to F12 on an x86_64, the new system boots and the daemons come up, then the screen goes black and the computer restarts. But then it won't boot at all. It just keeps restarting.It could be a monitor driver problem. The one time I managed to press "I" fast enough to bring GRUB up, I tried adding "nomodeset". Nothing changed. The monitor is an HP 2009m, so it should not need "nomodeset" anyway. Xfree86.cf has not changed from F11 to F12.
I have a full DVD, so I can bring up Rescue Mode. I had hoped to find clues in (/mnt/sysimage)/var/log/messages, but nothing is being written to it. Once after I rebooted off the hard disk from Rescue Mode, I witnessed a long SElinux conversion. That disquiets me. But disabling SElinux does not solve the problem either.Can anyone suggest some kernel options that might overcome this problem? I shrink from reinstalling F11 from scratch and having to restore all my files from my backup system!P.S. I just found in my personal X11 log a message to the effect that /usr/lib64/dvi/nouveau_dri.so is missing. So it is; the directory has 12 drivers and not this one. If I remember right, "nouveau" often figures in trouble reports.P.P.S. As myself in Rescue Mode I can use xinit to bring X up! But it has only a vanilla text window and no mouse cursor, so I cannot use it or get out of it.
View 8 Replies
View Related
Jun 29, 2015
I have a system running a fairly new copy of Stretch. I have an nvidia Geforce 210 (on my desktop)
Code: Select allVGA compatible controller: NVIDIA Corporation GT216 [GeForce 210] (rev a1)
Previously running Squeeze I was using the proprietary driver and never had any issues. Now using the nouveau driver video playback of mp4 files is glitchy and programs like google earth don't operate smoothly. I installed the nvidia driver from the repositories based on this guide, used nvidia-xconfig to generate an xorg.config file. I made sure noeveau was blacklisted and rebooted my machine.
I was greeted with a black screen. So I booted up in recovery mode, used telinit 2 (side note: what happened to /etc/inittab???) to change to a runlevel that doesn't start X, and confirmed that nouveau was, in fact, not loaded. Typed startx and without any errors or warnings the screen went black. ctrl+alt+fN wouldn't bring me back to a terminal, but hitting the power button did shut down X and halt the machine.
I'm not really sure how to go about debugging this as I get no useful output from anything, just a blank screen and that's it.
For the time being I just blacklisted the nvidia driver and let the system boot with nouveau; I'd still like to get the nvidia driver working properly, though. I've always just downloaded the driver right from nvidia and installed it, but I know that isn't the best way to do it. I'd rather not screw up a brand new system, it's so nice and fast with the new SSD.
View 5 Replies
View Related
Aug 14, 2010
My KT4AV-based PC has burned up two GEForce 6200 cards, so I decided to try an AGP bus Radeon HD 3650.At the same time as the nVidia card went "black screen" (no video at all, not even text) my CMOS battery died.I put in a new CMOS battery and fixed up the CMOS settings as well as I can.I put in an old Trident TVGA96PCI cardnd got as far as terminal mode, but even with the xserver-xorg-video-tridentdriver already n the system, I couldn't get the display manager to run. I gave up on the Trident card becauseold and bought a new Radeon HD 3650 card and changed the display bus from PCI toAGP in the CMOS settings.
The Radeon card now also gets me only to terminal mode.tried coaxing the system by renaming xorg.conf, but that didn't help - rebooting still gets me nowhere,no new xorg.conf file. The renamed one is still configured for the nVidia card. The xserver-xorg-video-radeon driveris also present, as "sudo apt-get install xserver-xorg-video-radeon" tells me it's already the latest version.I'm presently stuck without direct network support, as the ethernet connection hangs the computer during rebootthe message, "ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready." If I unplug the ethernet cablefor starting successfully, when I plug it back in while I'm at the command prompt, I get a message to the effectthat eth0 up and running,"ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready" messageappears again and the sytem again freezes.I have successfully pinged this PC from another on the network, but not while it's hung up at the above-quotedmessage. In that case, it's "unavailable."How do I purge the system of the nVidia stuff and replace it with an approporiate Radeon driver ?
View 4 Replies
View Related
Aug 5, 2009
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
View 3 Replies
View Related
May 28, 2010
Quote:
product: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz
vendor: Intel Corp.
[code]...
View 1 Replies
View Related
Oct 21, 2010
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
View 3 Replies
View Related
Apr 29, 2009
I am trying to install Fedora10 on a eeeBox, where I understand the graphic card is highly irregular. After the initial loading (the white/blue ASCII-art bar in the bottom) I get a black screen and that's all.If I Ctrl-Alt-F2 to a text screen and, as advised, do "init 3" and then "Xorg -configure" and restart the server with the new config - the same happens. Just a blank screen..
View 1 Replies
View Related
Jul 19, 2009
why do i get the black screen at install just after when it loads
View 3 Replies
View Related
Jan 19, 2010
I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/
View 2 Replies
View Related
Sep 1, 2010
yesterday I updated the system, and that involved kernel 2.6.34.6-47.fc13.x86_64. After rebooting, the progress bar goes fine, but when finished the screen flickers a little and goes black. I can't switch to other terminals via Ctrl + Alt + Fx, so I'm using remote access via ssh. I thought it could be nvidia issue, so I updated kmod modules with rpmfusion-nonfree-updates-testing, and when booting nothing complains, but I'm still getting black screen. Xorg log doesn't seems to complain (no errors (EE)).
View 14 Replies
View Related
May 27, 2011
downloaded Fedora 15 Live CD and made a booting live CD with it , everything went Okbut after the first screen " automaticlly boot after 10 s " everything just went creepy and the contrast of my screen has become very very low , I was able to see that unity booted but I barely could see the icons without being able to see anything esle , just dark*darkthe same happened with the usb live version .Im having a " Mageia RC " installed in dual-boot with windows 7 and I have the same problem with it . which means, the distro is there but cannot be used cuz the contrast is very very low
View 1 Replies
View Related
Jun 25, 2011
I upgraded my machine to F15. I was asked to reboot. From that point on, the system will not boot. I get to the blue screen with the 'egg', about 1/3 of the 'egg' turns white, then the screen goes black. No cursor, nothing.
I hit shift to get the Grub menu, tried booting my old kernel. Same result.
I tried burning a F15 live cd and booting that, but I get a desktop background with no mouse, no docks. It doesn't seem to respond to anything I do. I can boot it in the "basic graphics" mode, or whatever you call it, but I would rather not overwrite my entire hard drive with a fresh install.
I have seen references to some kind of recovery mode provided on the live cd that might repair my install without wiping my data, but I can't find it anywhere.
My hardware:
Dual core Atom D525
Intel NM10 chipset
View 1 Replies
View Related
Aug 13, 2011
I found a bug, it's due to light the screen, if I start not choose nomodet the screen is very dark, I use the setpci -s 00:02.0 F4.B=00 the screen back to normal, but when I restarted, which continued to setpci. How to fix this,
My laptop infomation:
Acer 4937
CPU: Intel Core 2 Duo T6600
RAM: 2GB
Graphic: Mobile Intel 4 Seri 796MB
I have installed Fedora 15 from USB. If i start without nomodeset then screen startup is black!
View 4 Replies
View Related
