Whenever I use the function hibernate or sleep - or just generally close my lid on my laptop, my laptop displays a black screen when I open the lid again - though it is turned on.
Basically, it hibernates/sleeps the laptop when I close the lid. When I open the lid though, it turns on the laptop, but brings me a black screen.
Code:
Issue: Black screen displays after nVidia splashscreen.
History: I performed a clean install of Fedora 12. I performed NVidia driver "GEForce 4 and below" install for a PAE kernel as found here:[URL]..I kept a log of each command in the order performed:
[Code]...
Well, I just got back from the Pepsi Center after watching the Denver Nuggets NBA basketball team look silly against the Dallas Mavericks. 4.5 hours later and I still have a black screen. Was it Einstein who said, "it is insanity to do the same thing, the same way, over and over and expect a different result"? I feel I will been testing that hypothesis soon.
since I've upgraded to 11.04 on my Dell Latitude E6400, every time I close the lid and open it again, Ubuntu fires up but the screen itself is totally messed up, it's just random patterns all over the screen. The laptop is locked, so I can type in my password, hit enter, and once I'm logged in again the screen is perfectly fine, so the system itself works, only the display is the problem
View 5 Replies View RelatedWhen I close my laptop and open it the screen become grey and blotchy with almost an argyle pattern. This has only started happening after I configured the usb ports to work in my VM. My startup screen also says something about a usb problem, and S for skip and M to manually fix it but I have had no problems with my usb. Oh except for my computer won't start
View 2 Replies View RelatedMy laptop screen will go black while i'm using it. I do not have any screensaver enabled. It just goes black (whenever) and I have to reboot to use my machine again
View 5 Replies View RelatedI connected my HP Pavillion laptop to a 1360x768 Vizio TV. On the TV it displays my laptop but on my laptop it has a black screen. How do I fix it so I can see my laptop screen on my laptop and on my TV at the same time?
I used to be able to do this with this TV as well as my friend's Samsung. I'm using a VGA connector. What should I do to have my laptop screen on my laptop and on my TV at the same time?
My laptop was shut down normally, but when it restarts - it just shows the very first image (Toshiba something....) which is the screen where it says what commands to type to get into bios.
After this - the screen shows nothing more. All black, except some faint (extremely faint) lines...
I don't know - my first thought was that the screen itself was caput, but since it shows the initial screen - I guess it's not...
Got a problem with Ubuntu 9.10 and a Lenovo T400 with an ATI Radeon Mobility HD3400 and ATI drivers /ATI contol center. Whenever the laptop wakes up from power-saving mode, the screen goes black (with some jagged mulicolored lines).
View 2 Replies View RelatedI'm having problems with the screen going black on startup in 10.10. It appears to go completely off (no backlight or anything). If I press ctri+alt+f1 I get a terminal, then I can ctrl+alt+f7 and the desktop appears. I have tried setting the mode to the correct resolution in xorg.conf and I tried using the vesa driver, but it still doesn't work. My graphics card shows as sis 661/741/760
View 5 Replies View RelatedI installed Ubuntu 10.10 to dual boot alongside Windows 7 on a Dell Inspiron. This worked fine and after restarting it seemed to be working normally, after the first boot into windows though when I tried to restart the laptop again I just get a blank screen with a blinking cursor in the top left instead of the grub screen.I'm still able to boot the LiveCD fine and tried to reinstall Ubuntu but the exact same thing happened? Anyone know what's going on/how to fix this?
View 9 Replies View RelatedI have a sony vaio laptop(model-VPCCW27FX) 64 bit.I am currently using windows 7 os. I tried installing ubuntu using wubi and also by making a bootable disc. The installation proceeds well. When I restart my laptop, it asks whether to start windows or ubuntu.But, when I select ubuntu, the screen goes blank.
View 1 Replies View RelatedI like to suspend my laptop when I close the lid. I have squeeze installed. When I open the laptop lid all lights indicated that it coming out of suspend but the monitor stays black. It is worse since I install the ati drivers for the card instead of the xorg. It did it with both but worse with nonfree drivers. I can get it to come out by ctrl alt f2 and the ctrl alt f7. However yesterday that did not work but that was the first time. My laptop is an acer 5251-1513 amd processor v120, and hd 4250 radeon
View 6 Replies View RelatedI'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
The screen of my years-old HP laptop (running Natty) freezes and eventually turns black. Ctrl-Alt-F# works to switch to the terminals. My fan is even louder than usual. I spend some time fooling around with ps and kill and shut down some of the most resource-consuming processes, which quiets the fan a bit, but tty7 still shows a black screen except for my mouse pointer.
I finally decide to shut it down altogether, but then I think to myself, "Self, you've used the power switch to shut down before in this situation, but shouldn't there be a more proper way to do it in the terminal?" So I try shutdown, I have trouble with it, it proceeds to get hopelessly tangled up, and it looks like it's frozen up in mid-restart when I throw up my hands and decide to go for the old power-switch-for-five-seconds method after all. Now when I start the computer and select Ubuntu from GRUB, I get this:
[Code].....
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
I have a laptop and an external monitor connected via displayport. I can configure both displays via settings with correct resolution and arrangement. However, this configuration is not sticking, and every time I shut down the laptop or close the lid I will need to fight with black screens and more to bring the same configuration again. Basically, it seems that the monitor is "stealing" the primary role to the laptop's native screen (I have it configured as secondary, but also being primary the configuration gets messed).
After many trial & errors, this is the routine I have found to make things work every time I boot / awake the system:
1. Boot. Laptop's display shows the booting sequence.
2. When the login screen should appear, laptop's display goes black, monitor shows background.
3. If I press F9 to increase brightness, the brightness icon appears in the monitor, but it is stuck at the minimum.
4. The only way to leave this point is by pressing F7 (project screen) and then F9 again to increase brightness. Then the laptop's screen does light up.
This is when I'm lucky. Sometimes the configuration goes mad and I get mirrored displays and different resolutions, without touching the settings myself. Also, if I unplug the displayport I run the risk of getting stuck with a black screen in the laptop, without any way of recovering the GUI other than rebooting (Ctrl Alt F2 will still show the command line screen).
My system is Debian 8 testing up to date, running in a Lenovo T430 with Intel components. I'm not sure the monitor is relevant here, but in any case it is an Eizo CS240.
I have an Asus z9100 laptop with an Intel 855GM integrated graphics chip, which is running Karmic (the purpose of the laptop is to be a MythTV frontend so my understanding is that it needs to run 9.x in order to connect to the MythTV 0.22 backend - I have installed and configured this using the installable Mythbuntu package) and the laptop is subject to this bug which causes random freezes:
[URL]
So, following advice for similar freezes I've seen, I have added the following options to my grub menu.lst on the kernel line:
nolapic nomodeset
and I have edited xorg.conf so that it makes use of the vesa driver instead of the Intel driver. This results in no freezes and if I wanted to watch Myth on the laptop screen I'd be squared away. However, the laptop has a damaged screen so the point was always to output the signal to an external monitor via its VGA out.
When I attach the external monitor and boot with the setup as described, the external monitor is never detected. But I noticed that if I remove the "nolapic nomodeset" from the kernel boot line, it is detected. However, signal is only output to it during the earliest part of boot (when the Ubuntu logo is in the center of the screen before the full-screen graphic with the animated progress line), after which the external monitor goes black and all the display output goes to the laptop screen. The external monitor power button is still lit up green as if it has been detected and is receiving signal, but it's just a black screen.
get the signal out to the external monitor after the initial part of the boot process, using the vesa driver? Here is the current state of my xorg.conf:
Code:
Section "Device"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
[Code].....
After running for a while, often after starting a program that displays graphics, such as Shutter, Gimp, Ocular, or maybe simply having previews in Dolphin (as some of my folders default to large previews)most menus, and some windows will go completely black. Some simply grey out (only ksystemlog does this that I have noticed so far)Blindly clicking anywhere on top title bar has no effect (would expect minimize/maximize etc to work if hitAlt-leftmouse or alt-middlemouse will allow window move/resize - black actively conforms to new window size/shape.
Often this blackening is preceded by a loss of all global hotkeys, which may not be related.With no visible menus or buttons, and with no hotkeys I am forced to hit the PC power button and allow kubuntu to shutdown.If I am lucky and hotkeys still work i can simply log out with ctrl-alt-shitft-del and logging in again fixes the issue.Linux betlogbox 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 08:03:28 UTC 2010 x86_64 GNU/Linux
I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedI have a dual screen setup with one card NVidia 8400GS.
Both screen are identical 22" LCD LG W2246 Monitors.
I have Dual X-Display setup.
I am using Gnome Desktop.
The left hand screen displays everything, menus, panels, background and of course desktop launchers.
The right hand screen displays everything except the desktop launchers.
If I create a new launcher on the left it appears on the left desktop when created.
If I create a new launcher on the right it appears on the left and can not be dragged over to the right screen.
I am running ubuntu 9.10, on a Lenovo laptop. Has been working perfectly until now. But now my screen is split into 6 very small screens which all work in synch. That is - I have 6 mouse pointers - it is really like having 6 very small screens. All software is still working. However - I need to go back to only one screen in full-size. Has anyone ever experienced this. Using Nvidia accelerated graphics driver.
View 4 Replies View RelatedSince my laptop went back to DELL to be repaired closing the lid does nothing. It used to put the laptop into suspend. I even tried on my windows partition and closing it still does nothing. I suspected that the switch(?) that controls this is not sending any data to the laptop - is there away to see if any input is being received when the lid is closed? Or does anyone have any other thoughts on what might be at fault?
View 3 Replies View RelatedI recently upgraded my laptop from Lucid to Meerkat 10.10. Everything was fine until I closed my laptop cover. In "suspend" , I can't come back. I get a black screen with a frozen cursor, and I have to reboot. Not a good situation with a laptop. Is there anything I can do? I prefer Meerkat to Lucid for my laptop except for this one area.
View 2 Replies View RelatedGnome (or XORG, I'm not sure which name to give it) freezes up not always, but about once every 24 hours after I close the laptop's cover/lid. I know this happens when I close the lid rather than open it judging by the time the clock is locked at. The cursor will move around on the screen, but noting will react to it in any way. Other services such as FTP and Samba still work just fine when the computer is "locked down". Without more details to why the problem is occurring, I have no idea what to search for or where to get started solving the problem. I have attached the XORG logs (found in var/log) in case they are of any use.
View 7 Replies View RelatedI am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
I've been struggling trying to get a Lenovo T410 to display video on both it's internal LCD and an external display at the same time, and I need to get it working by Monday or I'm toast. know this will work with other distros, but we are contractually bound to use RHEL5.If we use the laptop on it's own there is no problem, however once we set it in the docking station, the external display shows no video, unless it is rebooted. Then it will only display video on the external and not the laptops own display.
Our engineers are constantly going to meetings and need to be able to undock the laptop and have the display appear without having to reboot. Then conversely, return to their desks and have the video on the external display without rebooting.I suspect that the problem is that RHEL5 is only up to release X11R7.1 of X.Org, which is still using version 1.1 of RandR and from what I can surmise, 1.1 of RandR does not recognize multiple video outputs.I was hoping that someone more knowledgeablthan I can confirm this and if I'm right do I need to manually build the latest release of X.Org to get this to work
I'm wondering if there is any way to execute a program, run some command or anything else when closing the laptop's lid.
My question aims to be generic, both for Windows and Linux. Something useful should be locking the laptop when closing the lid (Win + L in windows), or running expensive processes such as antivirus analysis etc. without doing it manually before closing the lid.
I have a Dell Latitude D505. I installed Squeeze on 12 November 2011 from the weekly DVD. I install updates every day, when available.
My kernel: 2.6.32-5-686 #1 SMP Thu Nov 25 18:43:34 UTC 2010 i686 GNU/Linux
Everything is working fine except the button that is pressed when I close my lid. Hibernate works, Suspend works, blank screen works. user is member of the group "powerdev". I really thought thread "closing-laptop-lid-renders-computer-unusable-786822" would bring me a solution. When I close my lid my screens turns black with my mouse cursor on it. Connections with ssh are broken. Keyboard is dead, mouse pad too. It looks like it never start any software it just hangs immediately. I cant find anything in my logs.
It looks like something must've slipped the attention of Ubuntu developers as in the previous LTS version laptop suspension after closing the lid worked perfectly fine for me (Dell Latitude D820) while after upgrading to Meerkat it doesn't work any more....well sometimes it does sometimes it doesn't - it behaves sort of like a weather in UK/Ireland ...anyway...is there more information I could provide to you guys or is there something you could give me to point me to the right direction ?
View 3 Replies View RelatedI am using a old laptop as a server now and its running great! I would like to disable sleep/hibernation when I close the lid (i would prefer the screen still shut off if possible) ...
This has to be done via command line because I don't use a gui ...