I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 RepliesI installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies View RelatedNVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).
This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.
Is there a way to fix it or at least, recover from a broken video card driver ?
Issue: Black screen displays after nVidia splashscreen.
History: I performed a clean install of Fedora 12. I performed NVidia driver "GEForce 4 and below" install for a PAE kernel as found here:[URL]..I kept a log of each command in the order performed:
[Code]...
Well, I just got back from the Pepsi Center after watching the Denver Nuggets NBA basketball team look silly against the Dallas Mavericks. 4.5 hours later and I still have a black screen. Was it Einstein who said, "it is insanity to do the same thing, the same way, over and over and expect a different result"? I feel I will been testing that hypothesis soon.
I had a fully working Nvidia driver setup in FC 12 with no problems using an old LG monitor (LCD panel) on a VGA connection. I have just replaced the monitor with a newer Dell model that has a DVI connection. I plugged it in and got nice Post Screen, FC 12 boot progress display but when it got to displaying the login screen it went black.
Ctrl +Alt+F2 took me to a command prompt where I can type commands no problem. If I change the driver to the Nouveau (and Chattr +a the xorg.conf file) I get a lovely gui. So far nothing I have tried has let me use the Nvidia driver. I have searched around Google and tried nvidia-xconfig, system-config-display, livna-config-display xrandr (which fails to work at all) but so far I have got no where.
I just updated from FC 10 to FC 12 via install/upgrade disk, and when re-booted the screen is then black (at the point that it should display logins). I think it may be due to nvidia driver in FC 10 not being upgraded, because I think I compiled it from nvidia rather from yum install. Anybody else have this problem? BTW, it is a dual boot with Win XP, but has never caused a similar problem before.
View 8 Replies View Relatedyesterday I updated the system, and that involved kernel 2.6.34.6-47.fc13.x86_64. After rebooting, the progress bar goes fine, but when finished the screen flickers a little and goes black. I can't switch to other terminals via Ctrl + Alt + Fx, so I'm using remote access via ssh. I thought it could be nvidia issue, so I updated kmod modules with rpmfusion-nonfree-updates-testing, and when booting nothing complains, but I'm still getting black screen. Xorg log doesn't seems to complain (no errors (EE)).
View 14 Replies View RelatedI should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.
View 3 Replies View RelatedI just rebooted from an yum update, which updated my kernel 2.6.31-something to kernel 2.6.32-whatever-is-up-to-date-in-testing. My disk layout was LVM2+encrypted root. When I rebooted it prompted me for the encryption password as always. After I entered the correct password the loading screen (progress bar) finishes up as usual. Then, the screen is black.
It just stays in console resolution, but its just black. No typing, no chars, no X-mode, no errors, no VT-switches, nothing... just black. I remember to have started at 2.6.27-something and never had to kernel-update problems, so I dont know why it's annoying me now with todays update. I cant work with the machine any more.
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies View RelatedTried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
I'm new to Fedora! My problem is this, I was updating Fedora using yum, the updates were in the process of installing when I got up and tripped over my power cord and of course cut power to my computer killing it and interrupting the installation. I plug my computer back in and boot it back up. I make it to the blue Fedora loading screen with the blank Fedora symbol that fills with white while loading; loads fine but before the user login screen appear Fedora melts down. The screen goes black, the cursor appears with the circle loading timer, and some form of terminal is there were I can enter text but no commands like SU or whatever seems to work.
View 4 Replies View RelatedI have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
View 1 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedAfter installing Ubuntu and seeing my resolution would only go to 800 x 600, I found this strange. A message popped up about the nVidia drivers I could downlaod that would enable me to do more so I did. I restarted and all was fine. Nice effects, high resolution. However, after going on XP, then going onto Ubuntu, the screen ahs gone black. The white Ubuntu logo can be seen for a while as it loads, but then the monitor goes completely blank as I hear the sound when the log-in screen appears.As I said in my title, it was the 185 driver
View 3 Replies View RelatedI have Asus N61jv laptop with optimus, and i use ubuntu 5-6 months, i know that i can't use my nvidia graphic card, today ubuntu offered to install nvidia drivers and I accidentally clicked, after restart i see only black screen, can someone explain me how to get back to a previous state, i found some topic with this solution "except booting to a live cd and disabling gdm.". How can i fix this problem, i have important data on ubuntu?
View 3 Replies View RelatedI've been using ubuntu fine for a while when I decide to activate my nvidia graphics card.After rebooting, however, I hit nothing but a black screen. I've searched the nets and others have seemed to solve the problem after hitting alt+ctrl+f1/f2 and editing some files after that, but that doesn't work for me. Booting into recover console gives me nothing but a long stream of white words before it runs to --> done. and then it goes back to a black screen. Running from Live CD I can't access my ubuntu files.
View 3 Replies View RelatedI have a system running a fairly new copy of Stretch. I have an nvidia Geforce 210 (on my desktop)
Code: Select allVGA compatible controller: NVIDIA Corporation GT216 [GeForce 210] (rev a1)
Previously running Squeeze I was using the proprietary driver and never had any issues. Now using the nouveau driver video playback of mp4 files is glitchy and programs like google earth don't operate smoothly. I installed the nvidia driver from the repositories based on this guide, used nvidia-xconfig to generate an xorg.config file. I made sure noeveau was blacklisted and rebooted my machine.
I was greeted with a black screen. So I booted up in recovery mode, used telinit 2 (side note: what happened to /etc/inittab???) to change to a runlevel that doesn't start X, and confirmed that nouveau was, in fact, not loaded. Typed startx and without any errors or warnings the screen went black. ctrl+alt+fN wouldn't bring me back to a terminal, but hitting the power button did shut down X and halt the machine.
I'm not really sure how to go about debugging this as I get no useful output from anything, just a blank screen and that's it.
For the time being I just blacklisted the nvidia driver and let the system boot with nouveau; I'd still like to get the nvidia driver working properly, though. I've always just downloaded the driver right from nvidia and installed it, but I know that isn't the best way to do it. I'd rather not screw up a brand new system, it's so nice and fast with the new SSD.
My KT4AV-based PC has burned up two GEForce 6200 cards, so I decided to try an AGP bus Radeon HD 3650.At the same time as the nVidia card went "black screen" (no video at all, not even text) my CMOS battery died.I put in a new CMOS battery and fixed up the CMOS settings as well as I can.I put in an old Trident TVGA96PCI cardnd got as far as terminal mode, but even with the xserver-xorg-video-tridentdriver already n the system, I couldn't get the display manager to run. I gave up on the Trident card becauseold and bought a new Radeon HD 3650 card and changed the display bus from PCI toAGP in the CMOS settings.
The Radeon card now also gets me only to terminal mode.tried coaxing the system by renaming xorg.conf, but that didn't help - rebooting still gets me nowhere,no new xorg.conf file. The renamed one is still configured for the nVidia card. The xserver-xorg-video-radeon driveris also present, as "sudo apt-get install xserver-xorg-video-radeon" tells me it's already the latest version.I'm presently stuck without direct network support, as the ethernet connection hangs the computer during rebootthe message, "ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready." If I unplug the ethernet cablefor starting successfully, when I plug it back in while I'm at the command prompt, I get a message to the effectthat eth0 up and running,"ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready" messageappears again and the sytem again freezes.I have successfully pinged this PC from another on the network, but not while it's hung up at the above-quotedmessage. In that case, it's "unavailable."How do I purge the system of the nVidia stuff and replace it with an approporiate Radeon driver ?
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
Quote:
product: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz
vendor: Intel Corp.
[code]...
I just installed Maverick on my HP tx1000. Jockey offered me two drivers for my NVidia Go 6150. I tried the recommended one--and it seemed to be working. It had a green light next to it in Jockey, Compiz worked, etc. Then I rebooted.
Except it didn't reboot--the disk thrashed for a while, and then I was met with a black screen. I tried recovery mode and got a bash prompt...which crashed when I ran `startx'. Then I tried Failsafe X, which did work. After some experimentation, I realized it was the Nvidia driver at fault, so I tried the not-recommended one, which didn't work, and now I've disabled both of them. But isn't there a proper driver for me to use? IIRC, I was using a restricted one with Lucid, and it was working all right.
Fun fact: The day before I installed Maverick, Windows 7 randomly decided to not boot all the way. It would show the splash screen, and then hang with a black screen too. But it works in Safe Mode. And had been working fine for a while beforehand. There must be demons in my graphics card.
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies View RelatedRunning ubuntu 10.10, had to use nomodeset to successfully boot from cd into "Try ubuntu without installing" thing and install ubuntu.
Edited grub by adding nomodeset after quiet and splash in order to boot from hard disk, still booting that way as I'm writing. The computer is an All In one Pc called ONETWOPWU44. The graphic card is an NVIDIA g210m.
After booting into hard disk I installed the proprietary driver resulting in an alternate of white then gray then black then an Image with red blue and some other colours on the screen, not sure of the order but they came one after an other, right when the login form should appear, I am then able to login by tipping my password into the form and pressing enter, I now that cause I can hear the sound when the system loads but the above described situation continues.
I had the same result with an older nvdia driver it was 253 something, don't remember exactly. Then I downloaded the 260.19.21 driver from nvdia website and installed it, with this one I only got a black screen. I now have a fresh ubuntu 10.10 copy and would like to be guided in making this work. How do I install the driver corectly or how do I enable nouveau 3d support?
I had Ubuntu 10.04 running fine. Then I got curious about NVIDIA XServer.
"ATI Technologies Inc RV380 [Radeon X600 (PCIE)]" - Video Card
I opened it up, clicked a settings change, and said OK.
It said you need to update your blah blah blah.
Then it said blah blah blah doesn't exist.
Then it said it would create it for me.
Then I said REBOOT!
Now I get a black screen of death.
The only way I can get anything to happen on my monitor that comes from this computer is to boot into the Install Disk and say "TRY UBUNTU".
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies View RelatedAfter installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies View RelatedI just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
View 9 Replies View Related