Update: I've been looking into third party tools and Slackware live Distributions, example, "Slax"; still, I have yet to have complete success.
I have discovered that by using syslinux I can make the USB Hard-drive Bootable -- I learned this by playing around with Gentoo, however, I like Slackware. I was wondering if any-one could point me toward the direction of how to install Slackware and then utilize syslinux to make it bootable?
I had to reinstall Windows 7 on my machine (go figure) and I am trying to restore GRUB so I can use Ubuntu again, but I can't seem to do it with my 10.04 Lucid Live CD...which I can actually get to work with "nomodeset" on my Nvidia card (GeForce 6150 LE). However, I try to use my 10.10 Live CD, and even with "nomodeset" I get nowhere. If I hit the ESC key, I can read "stdin error 0" or something along those lines, then it shows many repeating messages with "logical blocks"...
Ubuntu-live-usb hangs And the only thing I see are Ubuntu and dots changing colours from orange to with. How may I see boot post and see where the problem are? I have check the disks by hold down -shift.
Iam tring to install 11.4 on my new computer, when i start the computer the green screen pops up and syslinux starts. However when it finishes loading a dialog box pops up saying "Make sure that cd number 1 is in your drive" . Obviously it it is, because i am booting from the dvd. I dropped to the shell where i saw this message "Inappropriate ioct1 for device". What does all this mean.
I currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
here are my specs...AMD Athlon xp 2200+,1.80 Ghz,736 mb of ram,10 gb hard disk&Nvidia GeForce2 Integrated GPU...actually it hangs up after loading that bar or sometimes before loading itselfshould i opt for older fedora if so which version i even tried fedora 11 kde but it hangs after booting up
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
I try to boot the live CD and try xubuntu without installing, and my computer just hangs at a black screen, cuts off, then goes black and repeats. I also tried just installing with nomodeset enabled and it seemed to install fine, but it did the same thing as it does with the live cd, GRUB wouldn't even load... the computers specs [URL]
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo: Code: Host Name: OWNER-PC OS Name: Microsoftr Windows VistaT Home Premium OS Version: 6.0.6001 Service Pack 1 Build 6001 OS Manufacturer: Microsoft Corporation
Im trying to install fedora 11 from the live CD and when i get into the CD meny where it says "boot" and "press tab for boot options" i press enter. then a bunch lines flash across the screen with a lot of error messages. then the fedora loading bar at the bottom loads. hangs for about 1 minute at the very end. then the GMD screen appears. But the GMD screen is all out of place and its patchy as if my graphics card was causing some kind of error
I don't have a cd player in my laptop so live cd is not an option. All I have here is a usb stick that has syslinux, I thought it could boot ubuntu located on my harddrive from syslinux on the usb stick but don't know how. My system doesn't boot anymore, I can boot a usb stick containing TRK but that doesn't do much. I want to boot the ubuntu kernel and initrd that are on the harddrive so I can recover (kernel .... innitrd single). Both the kernel and initrd are on /dev/sda8/boot but can't tell syslinux to boot them.
Copied the kernel and initrd from sda8 to the usb then edited the syslinux.conf to add the following item: label 4 menu label ^4 : boot ubuntu recover kernel vmlinuz append initrd=initrd ro root=/dev/sda8 single Now working from my ubuntu and trying to install grub again.
I downloaded Ubuntu 10.10 2 days ago and tried to instal it on my:HP EliteBook 8540wIntel Core i7 740QMIntel QM57 Express8GB RAMnVidia Quadro FX 1800 with CUDA (1GB)Of course I went 64bit, but the Live CD wouldn't start. Instead I get some weird artifacts on my screen.I can see bits of my Windows-background with taskbar and some of the windows I was using earlier before restarting, like the download manager. If cold boot my PC I see black and white boxes with coloured dots on them.
Thus I thought of an issue with the 64bit architecture and possibly the grafics card too (the artifacts are clearly remnants of data from the VRAM)I tried the same with the 32bit version and got the same issue (indicating NO issue with 64bit, at least not directly).In the end, I installed Ubuntu from the alternate 64bit CD and now am stuck with a non-working installation of Ubuntu.I get some kind of error concerning pcieport (probably PCI Express).When I install Ubuntu on Virtualbox through Windows 7 however, I don't get any kind of issue (I'd still like to be able to run Ubuntu natively)Any idea on how to fix the problem?PS: I'm not very experienced with Linux, so if you ask me to go into console mode, please be detailed on what command I should input.
I have downloaded 64bit desktop CD Iso installer form ubuntu site. when i boot the live CD, i get the first black screen of keyboard and man symbols at the bottom. then the ubuntu splash screen and it is stuck there for ever. also my HDD activity is over since no CD derive blinks and HDD led blinks. if i press CTRL+ALT+backspace i get a text screen with several error messes most of them input output error and errors like unable to create /tmp. I will attach a pic shortly..
I am so close to the answer i think. My goal is to fully automate an entire Ubuntu installation off a usb flashdrive from start to finish. So, i did as this guide said and i made a kickstart ks.cfg file that is used to automate an installation, as i'm sure many of u know.The next step has infinitely confused me. To make the ks.cfg file boot automatically and startup an installation to my specifications.from this linkttp://old-releases.ubuntu.com/ubunt...en/apcs01.htmlI have found that editing the syslinux.cfg file in the syslinux directory on the usb can be used to load preseed file, which to my understanding serves the same purpose as a kickstart file.
When trying to boot a USB disk image of either 10.10 or 10.04 I get an error saying that no syslinux configuration file could be found and "syslinux error: No DEFAULT or UI configuration directive found.".
The USB disk was created using the Startup Disk Creator on Maverick.
I'm guessing the second error is just caused by the first, since the syslinux.conf definitely isn't there. Thing is, I've used the 10.04 image before and it's worked fine, so I'm starting to think it's the Startup Disk Creator that's at fault.
So lets start with my laptop. I am currently running windows vista 64-bit and I usually experiment with linux on a virtual machine but I decided to try and put it on as a dual boot os. I have x3 320gb hdd (7200rpm) on raid5, x2 1gb nvidia gtx go running sli, 8gb ram, 2.8ghz core2 quad, and random other things that aren't important. Point is that my system should run anything I throw at it.
So I downloaded Fedora 11 from a torrent and burned the iso to a disk. When I run it, it pretends its going to run it, it comes up with a log and loads stuff and all. But then it just hangs.. it doesn't do anything, no live starts, no nothing. Its just a blank screen with a blinking underscore in the top left "_" so I type and my typing shows up and thats it. Any other time I've used Linux I've never had to put in a command or anything to start, so I don't know what the problem is.
Downloaded few minutes ago Fedora 15 live x64 and used Fedora live usb creator to make my usb drive bootable.Once configured correctly my bios Syslinux starts but it hangs on the startup message
Ok so I've searched for a solution to this problem everywhere and couldn't seem to find any, so I decided to post here.Recently I came across a new modified version of Ubuntu which was made for pentesters, called "blackbuntu".Now I know everything is the same as linux, except a little tweaked. So, I am trying to setup my bootable USB drive, and get this error (I chose Try an unlisted OS -- Then picked New Syslinux).And I keep getting this error:^
I was trying to do a fresh install of Fedora 13 using a live CD on my 7-year old laptop. However, the installation failed during creation of home folder, citing some disk issue.Now, when I try to reboot my comp with the live CD, the boot screen hangs at the "f" graphic. What could be wrong? Is there anything I can do to reboot with the live CD and also install Fedora 13?Also, is there a way to fix corrupt disk sectors or skip them during installation?
I have used Universal USB Installer to extract the xubuntu 10.10 iso and install onto a flash drive. I would like to try a live version of xubuntu that boots from a flash drive. When attempting to boot from the flash drive, the screen effectively freezes after displaying the syslinux / ebios copyright message, with a flashing cursor.
Does anyone know a possible cause or solution? Information that may be useful: I am using a 4GB flash drive, formatted as FAT32. I formatted once using the Universal USB Installer, but some files were left on the drive, so I have reformatted it using the option provided by the Windows interface, (and reinstalled xubuntu.)
When I opt to install onto USB with a 2GB persistence file using Universal USB Installer, the installation processes hangs with a dialogue saying there are 0 seconds left to copy, until the dialogue is forcefully shut (and installation appears to be successful). When I select no persistence file, the process does not hang. (I am faced with the same aforementioned problem at boot time, regardless.)
I have not checked the md5sum (though I have no reason to suspect it will fail.) I have downloaded a simple programme which checks a single md5sum against a single file, although I am unsure which file I should check against in the case of xubuntu, and if the md5sum.txt file represents a single md5sum.
I am using Windows Vista on an old Toshiba Satellite. I am new to using linux, and am very unfamiliar with the the setup and installation procedure.
I am currently running Fedora 10 XFCE on an Acer Aspire 1 (1.6ghz atom, 1.5gb ram, 8gb ssd). I am trying to install Fedora-11-i686-Live-XFCE via USB stick (Kingston 4gb) and am having no luck. I downloaded the .iso via bittorrent. If I use liveusb-creator: .iso passes checksum, installs boot image, installs syslinux, claims it's complete. When I try to boot, or simulate booting with qemu, I get the message "Could not find kernel image: linux" If I use
it says that the .iso passes checksum, installs live image, updates boot config file, and setup USB stick as a live image. Once again though, when I try to boot, or simulate booting with qemu, I get the same message "Could not find kernel image: linux"
I want to make a DVD with Ubuntu, Kubuntu, and Xubuntu so i can choose one to start a live session when booting from the disc. I'd like to introduce linux to friends and having a few variations might make it easier to transition.
With Mythbuntu 10.10, the Live CD hands before it can fully boot the OS to a GUI. I'm running an IBM ThinkCentre (P4 2.6Ghz, 512mb RAM) with an NVidia 6200, and I'm using an HD LCD TV for the display.
I've tried to use nomodeset but that hasn't helped it boot. I've tried disabling dmraid also but I end up getting this error: 'General Failure Mounting File Systems'. I've had no such problems with the previous 3 versions of Mythbuntu. Although I didn't have this TV when I installed those ones... could that be the issue perhaps?
I can't boot 11.04 live CD anymore: when it starts booting the kernel it hangs with a blinking. I can reproduce it all the time now. The interesting thing is that I installed the system using the very same live CD that I can no longer boot. If I unplug the HDD, I can boot the live CD. I can boot 10.10 no problem, however (as well as a bunch of different distros). After booting it, if I choose restart from the menu, I can boot from my HDD no problem, but only once.
i am having old hardware..here the specs..AMD Athlon XP 2200+1.80 Ghz,736 MB of ram,10 GB hard disk and Nvidia GeForce2 Integrated GPU i tried to use live cd it hangs after loading bar or at some times before itselfi even tried to use fedora 11 kde live but it hangs after booting up
I've created a live and persistent USB boot of OpenSUSE 11.2 KDE according to the howto. It boots and works fine for about 5 minutes and then hangs. Only the mouse will move but I can't click on anything and it never comes back.
Can't boot 11.3 gnome live cd on my x86_64 system with Radeon hd 4650 agp. Boots into a black screen and hangs (two tries). Boots fine on another pc with on-board radeon pci-x.It also doesn't work in latest Virtualbox. Need I remind you: very, very bad impression for non-linux afficianados...I'm a happy user of 11.1 and 11.2 on same physical pc.
