Fedora Hardware :: Access A USB Device (GPS Logger "Navin Mini Homer")
Jan 7, 2011
I am wondering how to access a USB device (GPS logger "Navin Mini Homer") When I plug in the device, it is not automatically mounted in FC14. But when I type in dmeg, it is showing up:
Code:
[20225.352029] usb 2-1: new full speed USB device using ohci_hcd and address 8
[20225.541849] usb 2-1: New USB device found, idVendor=067b, idProduct=2303
[20225.541854] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20225.541858] usb 2-1: Product: USB-Serial Controller D
[20225.541860] usb 2-1: Manufacturer: Prolific Technology Inc.
[Code]...
View 6 Replies
ADVERTISEMENT
Jul 16, 2010
when i am prompted to send a bug report i am given two choices. either i ll use bugzilla or logger. which one should i be using?
View 2 Replies
View Related
Mar 23, 2011
This is VL Chowdary, a software engineer in Bangalore,India.I am currently working on a project that deals with "Creation of Postmortem data log file on Linux platform".The project is on Fedora 12 with Kernel2.6.31.5 version.For that i need following things.1. Find the location of core utility in the kernel.2. Find the source file that consists of actual implementation of the core utility (On Fedora's kernel 2.6.31.5)3. Based on that i want to implement a core file with my own project requirements.4. Build the kernel with the above implemented corefile replacing the existing one.I couldn't get the source file that contains the implementation of core utility.
View 2 Replies
View Related
Jun 13, 2011
I'm having trouble starting Fedora 14 on my computer. The startup procedure freezes while starting system logger. Before this started happening, I had formatted one of my logical disk partitions which is supposed to be mounted under the /var directory. I think may be the cause of this problem. However, I don't know how to fix it, as I can't get into the Linux command line to do a umount. I don't have a CD with which to repair the system, so is there any way to fix this problem without one?
View 1 Replies
View Related
Mar 26, 2011
I am brand new to linux and i am finding it really frustrating cause i always thought i had quite a knack for computers. ive looked online and searched a bunch of stuff but because im so new to linux i am having a hard time even understand some of the stuff. i really want to get comfortable/fluent with linux and unix and what not.
My netbook model is HP Compaq Mini 110 the distribution i am using is Linux Mint 10
My broadcom wifi device isnt working or something.
When i first installed mint, it said that i needed non-free drivers?
The ethernet cable instantly gave me connection and i was able to run updates but the wifi still doesnt work i think the updates only updated the free ones and not the non-free ones cause i dont remember ever specifying to download the non free ones how do i manually specify to download all available updates?
I also typed:
The output says:
Also when i right click on the little network sign on the bottom right corner, then it says "Wireless Networks device not read (firmware missing)"
View 7 Replies
View Related
Oct 5, 2010
(Logger pro is an app to retrieve data from scientific calculators/ instruments) I've always wanted to ask this question so here it goes... Has anyone gotten Logger pro (Linux beta) to work w/ Fedora? I have tried alien the two .deb packages to .rpm's so it becomes installable.. The installation seems fine, But the app doesn't run (I think it was like segmentation fault or something... I don't remember) anyways.. this is not absolutely important. I'm just wondering if this may be a problem w/ my install.
View 4 Replies
View Related
Jan 5, 2010
I updated quite a lot - kernel, selinux policies, initscripts, glibc and a lot more - and after reboot one filesystem does not mount. It says:Command failed: Can not access device... and asks for password. This is: RAID -> LVM (mirrored) -> LUKS -> ext3. Similar filesystem (raid->lvm(not mirrored)->luks->ext3) mounts fine. Mounting the problematic system by hand works fine. During boot, the lvm blockdev is named by UUID in crypttab, and the name used in fstab.
Of course I removed it from fstab to boot now. I tried downgrading initscripts so far, will try others. What I also noticed is that the emergency shell (bash) complains about something, I'd need to write it down next time I reboot; also "lvs" fails when / is ro, but maybe that's normal, dunno.Googling for the error message brought something about cryptsetup, but I didn't upgrade it (there is no upgrade available), and all I gather from it is that the error message might really mean something else, like device is already mapped.
It is probably something related to lvm mirrors, maybe also to luks, though the only related package in the list is the kernel, maybe the module-init-tools. SELinux seems not to be the cause, booting with permissive has the same problem. What I wrote above, leads me to thinking that luks is trying to set up lvm mirrors in parallel as they have the same uuid, but a) later during boot the mapping name is not there b) I have no idea what reads crypttab
View 1 Replies
View Related
Mar 18, 2010
How do you actually remove and install kernel when the system is not booting.
View 4 Replies
View Related
Apr 22, 2010
Does a mailserver have to have direct access to WAN or can it be a LAN device with just one NIC ?
We have two WAN access points.
One is an adsl router joined to the switch and all seems fine for internet browsing.
The other is a wireless system with a linksys router joining by way of PPPoE and this appears to connect fine.
This PPPoE is direct to our ISP and where we need to downlod our mail to our pending mailserver.
When the linksys router is also joined to the switch all devices can use either the adsl or linksys to roam the net. 192.168.1.1 linksys & 192.168.1.10 is adsl.
When I join the linksys direct to the mailserver I will then need two NIC's. One for the Linksys and one for the LAN.
This is where the fun has started.
So.... Can I just have one NIC (connected to the switch) on the mailserver?
View 5 Replies
View Related
Jan 18, 2011
Voice logger boot failure-reports 'error reading block 33051'
View 1 Replies
View Related
May 24, 2011
the message from dmesg for the IrDA device:
[ 3635.194162] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3635.338159] usb 3-1: New USB device found, idVendor=066f, idProduct=4200
[ 3635.338165] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]...
View 1 Replies
View Related
May 5, 2009
My new HP mini running Ubuntu sees my HP notebook running Vista,my Compaq desktop running Vista, and my HP desktop running XP as computers belonging to my workgroup, but I can only access my files on the XP machine. The mini and the notebook are wireless and the desktops connect to the router by cable.
All of the computers connect through the router to the DSL modem, and each of them connect to the HP wireless printer. None of the other computers see my mini as belonging to my workgroup, specifically including my XP computer. Figure that it is likely normal that I cannot with my mini open files that I find on my XP, but have to copy and paste them to my mini or one of the flash drives I use with it before I can open them.
I understand I have described a "well known problem" caused by a non standard sequence in Vista, that can be obviated by a fix to the login sequence that can be made to the linux code in my mini so that it will recognize and perform the login (user name and password) that is required when a Vista machine is encountered.
But I'm in over my head, unable to even find the command line on my mini.
View 6 Replies
View Related
Jan 26, 2010
I'm trying to move an existing FC10 install (created by someone else) from a 160GB WD1600AAJS SATA disk to a 160GB WD1600AAJB PATA disk (cursed trend of horizontally mounting SATA connectors at the end of the motherboard means the latest rev mobo doesn't fit in our enclosure!). I've used DD to copy the disk image from one to the other, but when attempting to boot, I get the following error:
Code:
Unable to access resume device (UUID=946f216f-0c24-4b02-a996-f42059970de7)
mount: error mounting /dev/root on /sysroot as ext3: no such file or directory
That particular UUID maps to sda2, which is the swap partition. Interestingly, both the SATA and PATA disk come up as /dev/sda on the motherboard. I kind of grok that the UUIDs are substitutes for directly naming the disks, and that they're referred to in fstab, initrd-2.6.27.12-170.2.5.fc10.i686.img, and in /dev/disk/by-* I'm guessing the problem is that the GUIDs (at least the one for swap) are no longer the same. How are they assigned to the partitions during boot?
I tried doing
Code:
swapoff -a
mkswap /dev/sda2
swapon -a
and put that new GUID in fstab and into initrd-* (using some steps I found elsewhere on how to gunzip/rezip it).At that point, I get a kernel panic on boot
Code:
Kernel panic - not syncing: CFS: Unable to mount root fs on unknown-block(0,0)
So I'm guessing that the other UUUDs have changed as well and I need to update them. How would I figure out what they are? I suppose I could change the references to /dev/sda*, but I didn't build this original image and I'm thinking whoever did had a good reason to go with UUIDs.
View 10 Replies
View Related
Mar 7, 2010
I have FC6 system with kernel 2.6.22.14-72.fc6 When I rebooted my system, I got error message "unable to access resume device (LABEL=SWAP-sda8) then it went to fsck automatically to all the partition and then stop (failed)
Checking filesystems
/1:clean, 10543/2560864 files, 204494/2560359 blocks
fsck.ext3: unable to resolve 'LABEL=/backup'
/boot: clean, 155076/19546112 files, 13456168/39072080 blocks
[Code]...
View 14 Replies
View Related
Sep 3, 2010
I want to give a new life to my old Mac Mini that has become too weak for Mac OS ...I successfully installed the Ubuntu 9.10 PPC version (alternate) on the machine. EXCEPT for the support of the wifi antenna. Network manager says: "device not ready". I suppose there is a standard tweak to get over this hurdle.
View 5 Replies
View Related
Dec 25, 2009
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
View 7 Replies
View Related
Nov 17, 2010
When booting the system ,"starting system logger : Failed" after that i login to the system as usual but the system logger cannot start,even i use the service syslog restart command,how can i solve such problem ,thanks a lot
View 1 Replies
View Related
Jan 18, 2011
I'm working on a Total Recall Voice logger that fails to boot.The voice logger has fedora installed.Its reports 'error reading block 33051,run fsch manually'. It also requests for root password for maintenance.Can someone pls help me out, and what could the root password be?
View 1 Replies
View Related
Mar 14, 2010
When I try to boot everything goes fine until:"Starting boot logger bootlogd"
View 1 Replies
View Related
Aug 11, 2010
post a terminal key-logger so I can just hide the terminal while my kids go berserk on my laptop
View 5 Replies
View Related
Aug 15, 2010
I'm using Ubunbtu 10.04 with Empathy 2.30.2 and Today I needed to check the history of conversations and I noticed that are not properly stored. The program keeps only a small part of discussions that were actually much longer.
View 1 Replies
View Related
Oct 30, 2010
Got a Zimbra server FOSS edition running on CentOS5.5. Everything was running fine until couple of days just found out that web administration interface just does not give the proper status. Web console says that none of the services are running which infact is not true. Only service that is not running is logger. This is the zmcontrol status output
Code:
antispam Running
antivirus Running
imapproxy Running
ldap Running
[code]....
Just the logger service is not running all the others are. But web admin interface shows all are stopped. Also it can be seen that zmlogswatchctl is not running. Starting it manually does not do any good. It does not start and it dies out by itself.I tried to google and found a couple of bugs related to logger and web interface but those were old and should have been done in this version 6.
View 2 Replies
View Related
Jun 14, 2010
I'm trying to run LKL (Linux Keyboard Logger) in a Ubuntu 9.04 VirtualBox VM (VirtualBox 2.2.2 running on a XP host). The package installs fine, but when I try to run it lkl -l -k /usr/share/lkl/keymaps/us_km -o ./kbd.log & it hogs the CPU usage to 50% and never logs a keystroke (in fact the kbd.log file is never created)
View 1 Replies
View Related
Apr 19, 2010
I configured syslog.conf to send logs to kiwi syslog server. After resetting (/etc/init.d/syslog restart),the server got log the message: "syslog 1.4.2 restart". But am getting just resetting message, nor other syslog message (using code or using logger command). I have other computer that send all the syslog messages.
View 2 Replies
View Related
Apr 7, 2011
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies
View Related
Jun 17, 2010
My co-worker install CentOS with /var (ext3) is 1TB:
Code:
I do the following tasks to move sdb1 to VolGroup00:
After that I moved /var back to / folder and reboot but the system hangs at "Starting system logger". Uninstall and re-install sysklogd package don't make any change. What I don't understand is I can start syslogd from command line:
Code:
Or run the init script in debug mode:
Code:
How can I debug this case?
View 3 Replies
View Related
Feb 23, 2010
I have 10 hotswappable SATA drives I use for a rotating backup system. On each drive I have created an encrypted LUKS partition. I normally mount the drive by first unlocking it via:
Code:
cryptsetup luksOpen /dev/sdc1: BD-4-B
However some time last week this command refused to work...for any of the drive. Before I even get prompted for a password I get the terse error message: "Command failed: Can not access device"I can't recall if it was a system update that broke it, but now I can't get to any of the data on these devices nor can I run any backups.
View 1 Replies
View Related
Sep 19, 2009
I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies
View Related
Feb 24, 2011
I know that there is support for this, but i can't seem to find any appropriate tools. Let's say my widget is at 192.168.1.111; i need to open a terminal window talking to it. Then i can control the things connected to it (it is a bus converter). oS 11.1, KDE 3.5, various machines.
View 2 Replies
View Related
Dec 6, 2009
this weekend I updated the OS on my laptop from OS 10.3 to 11.2.Most things worked fine ... and quickly ... but I have issues with some USB devices.Printers and everthing that works like a Memory Stick, HD (camera, mobile phone) are OK. But after the update to 11.2 I can neither use my scanner anymore nor my Garmin GPS device. Both devices are listed with 'lsusb' correctly. But applications are not able to find/access them.
For the GPS device I do not know how to do more tests. The application (gpsman) that worked fine with 10.3 does not find it anymore. The Scanner is detected by Xsane or Skanlite and also the driver can be installed with Yast when plugged in. But a test fails with "sane_start: Error during Device I/O". 'sane-find-scanner' also lists the device correctly. As a normal user it complains that there is no write access for usblib to the usb device. As root this error does not appear. It can be avoided temporarily by setting chmod 777 to all /dev/bus/usb entries. Then 'sane-find-scanner' does not show any errors.
But the applications do not work.
I already added the normal user to the "lp" group as shown in the /etc/udev/rules.d/55-libsane.rules and tried to give access to the usb-devices in /etc/fstab .... all without success. As I have two USB devices (Scanner, GPS) that worked fine with 10.3 but are not an external HD (or similar), I assume that someting has changed with the handling of USB devices from 10.3 to 11.2.
View 8 Replies
View Related
