I know that there is support for this, but i can't seem to find any appropriate tools. Let's say my widget is at 192.168.1.111; i need to open a terminal window talking to it. Then i can control the things connected to it (it is a bus converter). oS 11.1, KDE 3.5, various machines.
View 2 RepliesI'm currently using SuSE 11.4 and after running the full online updates and restarting the machine as YAST suggested, I no longer have eth0/eth1 available.
I'm clueless about what to do since I'm kinda new to Linux and at the moment, I'm trying out all the distros before making a full commitment to anyone. So far, Ubuntu has been trouble-free from day one, but I'm willing to give this distro (opensuse) some slack.
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies View RelatedI'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
this weekend I updated the OS on my laptop from OS 10.3 to 11.2.Most things worked fine ... and quickly ... but I have issues with some USB devices.Printers and everthing that works like a Memory Stick, HD (camera, mobile phone) are OK. But after the update to 11.2 I can neither use my scanner anymore nor my Garmin GPS device. Both devices are listed with 'lsusb' correctly. But applications are not able to find/access them.
For the GPS device I do not know how to do more tests. The application (gpsman) that worked fine with 10.3 does not find it anymore. The Scanner is detected by Xsane or Skanlite and also the driver can be installed with Yast when plugged in. But a test fails with "sane_start: Error during Device I/O". 'sane-find-scanner' also lists the device correctly. As a normal user it complains that there is no write access for usblib to the usb device. As root this error does not appear. It can be avoided temporarily by setting chmod 777 to all /dev/bus/usb entries. Then 'sane-find-scanner' does not show any errors.
But the applications do not work.
I already added the normal user to the "lp" group as shown in the /etc/udev/rules.d/55-libsane.rules and tried to give access to the usb-devices in /etc/fstab .... all without success. As I have two USB devices (Scanner, GPS) that worked fine with 10.3 but are not an external HD (or similar), I assume that someting has changed with the handling of USB devices from 10.3 to 11.2.
linux-rle9:~ # xvidtuneUnable to query monitor infowhy??? :S:Si got opensuse 11.3 installed and when i reboot,.i got a black screen saying ' Out Of Range'at the boot menu of Opensuse i have modify the resolution and it worked but when i restart its as if the configuration was not save and each time i start my computer i have to re configure the resolution
View 6 Replies View Relatedthe message from dmesg for the IrDA device:
[ 3635.194162] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3635.338159] usb 3-1: New USB device found, idVendor=066f, idProduct=4200
[ 3635.338165] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]...
I just installed 10.04 on a Dell C800 and I've been trying to connect to the internet via Ethernet with no avail. I did some searching and ran lspci -nn and got this:
user@user-desktop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub [8086:1130] (rev 02)
[code]....
I have a usb 4G dongle which has stated no linux support in australia from vividwireless.
The flip flop part does not exist for me in the sense I can not see the cd autorun files so I downloaded the files off the net and put them in my wine directory
I attempted to run the exe file thru wine but whether I try graphical or command line....it defaults to a graphical dialog box....I click on English...installer then shows the dialog box for the welcome screen ...then I click on next and the screen shows for a nanosecond the user agreement but exits with no log etc.
2) so in linux here is the info
Code:
Bus 001 Device 020: ID 12d1:380b Huawei Technologies Co., Ltd. but when I press lsusb again....that info disappears....hmmm
ok so
Code:
Oct 3 06:42:35 sid rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1435" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.
Oct 3 07:00:15 sid kernel: usb 1-8: new high speed USB device using ehci_hcd and address 3
[Code]....
I have two pci network adapters. I see them in pci device list (lspci). And I see them using ifconfig. How do I relate them - which pci device corresponds to ifconfig network adapter ? (I can't open my hardware and relate them using MAC stickers)
View 4 Replies View RelatedBrand new Acer laptop | Intel chipset
Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
During this week, I installed Debian twice on this system using NetInst, connected trough ethernet. Yesterday, I noticed the ethernet controller wasn't listed by lspci. I restarted, it appeared but didn't work. I turned off the system, started it a bit later and the device worked normally. This odd behavior has happened during the last twenty four hours. The ethernet controller appears and disappears. I enabled the "Boot from LAN" BIOS option to check the availability of the device right upon start and I'd say there's a 50% chance that it doesn't appear. I posted this message connected through the ethernet device.
I guess I should return the laptop because of this problem but I know very little about hardware and I wanted to ask first.
I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:
[Code].....
I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?
I just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run
Code:
ifconfig eth0
the result is
Code:
no such device
The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.
I have a device (not a pc) connected to my pc via ethernet, it dose not show up in networks, I was hoping there was a way of scanning to detect for it, is there a way of seeing content of it is basically what I'm asking?
View 5 Replies View RelatedI'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.
View 5 Replies View RelatedThe ethernet configuration files are under
"/etc/sysconfig/network-scripts" such as "ifcfg-eth0:1" etc.
The file looks as follow:
Code:
DEVICE="eth0:1"
BOOTPROTO="static"
ONBOOT=no
IPADDR="172.23.17.10"
NETMASK="255.255.255.0"
ALIAS="yes"
I've set the ONBOOT=no. This means this device should not be activated at boot-time. But as I reboot the machine, this device is activated again. This means the option ONBOOT doesn't work. Seems this is a bug of RedHat LINUX?
I want to know that in my Linux box under "Network Configuration....>Devices" i can see Device eth1 and Nickname eth0.
The ambiguity in my mind is when we want to down network interface we should call it by device name or nick name
Example
Or
Code:
how can i connect to the internet through an ethernet cable in the terminal... i.m having trouble booting and i need to connect to the internet and download some packages
View 2 Replies View RelatedI just upgraded to VMWare workstation 7. I was previously running v.6, and an older linux version, and everything was working fine. I moved over the same VM files to the new computer, and it doesn't find the ethernet connection. When I start up the virtual machine, I get an error message:
Could not connect Ethernet0 to virtual network "/dev/vmnet8". More information can be found in the vmware.log file.
There log file doesn't say much more:
Jan 07 17:31:36.928: vcpu-0| VNET: MACVNetPortOpenDevice: Ethernet0: can't open vmnet device (No such device or address)
Jan 07 17:31:36.928: vcpu-0| VNET: MACVNetPort_Connect: Ethernet0: can't open data fd
[code]....
Once xp has booted, I get the "new hardware" wizard, saying that it found an ethernet adapter. However, it can't find any driver for it. I think this dialog started appearing after I added a new virtual network entry using the "Virtual Network Editor". Originally I didn't even have a /dev/vmnet8 file. Now I do.
Just installed slackware64 13.1 and there is no ethernet device... lspci: Ethernet controller: Attansic Technology Corp. Device 2060 (rev c1)
View 8 Replies View RelatedCost effective (the people want cheap) solution to increase server storage space with as little impact on throughput (what I want) as possible. I have a server that sends instructions to 20 clients to perform certain tasks. The clients send gigs of data back to the server for storage.
BACKGROUND INFORMATION
Network: Gigabit Ethernet
Clients: (20) HP, Solaris, Linux
Linux Server: Dell R805 PowerEdge (QUAD Core Athlons 16 gigs of ram, 4 gigabit ports.
Selected directories are mounted (NFS) by clients. One directory to be mounted by the clients contains executable files. Mount commands are sent from the server (rsh) to the clients. Yes I know (ssh) but this is how the software was originally written so let's go with it.
The clients then receive commands to execute the binaries contained within the mounted directory. The binaries basically create an image of the clients filesystem including special applications. The client then sends the files and directories to the server which stores this �image�. This process can be reversed to restore a client to the initial baseline image.
In a nut shell, 20 clients are sending gigs of data to the server for storage. I need to attach a NAS (gigabit) to extend the storage capability of the server. The server would mount (NFS) to the hard drives on the NAS. The NAS, configured as a �direct attached storage� device (DAS), means the storage device is connected directly to the server and not the network (which makes it a DAS). This would provide direct storage expansion for the server. However, this configuration cannot be a bottleneck that significantly hinders performance.
Clients <---data---->Server<----storage---->DAS/NAS
1) Will a low end NAS (gigabit port) work? (NetGear 1TB ReadyNAS Duo, RND2110-100NAS) or something with a higher rated throughput (QNAP TS-239 Pro II)
2) Low end won't work, go with �?
3) Does the processor on the NAS play any role that would determine the performance of this configuration given that the server would mount directly to a directory on this device (DAS/NAS)?
I am not able to configure ubuntu 9.04 on network ,
i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)
64bit Slack doesn't recognize my ethernet device. ifconfig -a show no eth0. It's an onboard nvidia MCP55 ethernet nic. Never had this problem using 32 bit Slack.
When I try to modprobe forcedeth I get the following error:
repeats those two statements 3 times
I just recompiled my kernel with every possible 10/100 ethernet device included in the modules. Still no go.
A while back I've been playing with the idea of setting up one of my machines as some sort of data server and would like to access it through SSH. I've already conducted some tests through the wireless router and apparently on the software side there are no issues with the SSH thing. I also noticed that since the same adapter was in use (wireless) SSH 'fought' with the Internet for the bandwidth
In order to avoid the aforementioned problem and also in the spirit of enhancing security I am thinking of setting up the following network scheme with two laptops and two routers (a wired and a wireless one):Both laptops would receive the Internet service through the wireless router. Both laptops would be connected through their Ethernet ports to the other router. The wired router wouldn't be connected to the Internet. Would this set up allow me to use SSH only through Ethernet thus eliminating possible bottlenecks in the wireless network? I am operating in the assumption each machine would have two different IPs (one per router), is this correct?
For some weird reason (default network device?) when I connect the Ethernet cable to the laptop, although NetworkManager claims to be still connected to the wireless network, I can not connect to Internet (the wired router has no Internet BTW). But if I unplug the Ethernet cable the Internet continues through the wireless network.
I'm planning to switch back to Linux from Windows 7, but before I do that, I have a pressing issue. I won't be able to access my net by a usb or ethernet or whatever to get the wireless drivers (always had to do that on Ubuntu, guessing Fedora will be the same since I've never used wifi on it before) and need to know if there's a way to get those in an rpm file. Is this possible? I'm otherwise unable to run Fedora with internet for an indefinite and unacceptable amount of time,
View 5 Replies View RelatedI changed to a 4 port ethernet router (D-Link DSL-2542B Adsl2+)with intention to share Internet access with my brother (he's on Vista).Initially it all went well,but 3 days ago there were connection problems occured on the part of the ISP. Without realized the problem,I had reset the router.This morning I've been informed by the ISP that the connection has been re-established.So,I accessed the Internet via the 4 port router but failed to do so (server not found).Suspecting that the problem was from the 4 port router,I reverted to my old Adsl router (DSL-520B single port) and without any problem I managed to access the Internet back.I really need help to configure back the 4 port ethernet router to its initial state.
View 9 Replies View RelatedUnable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies View RelatedI am using ubuntu (11.04) here, when i connect Bsnl broadband link(wired connection). Internet is connect automatically But unable to instal, upgrad and access Internet pages ..
View 1 Replies View RelatedEver need to provide access to multiple PC's and did not have a router only a hub. Maybe this isn't original thinking, but then again maybe you didn't think of doing it this way (which i am sure there are many ways to do it) So I have 2 Ubuntu Servers, 1 Windows Box and a Hub - All 3 with internet access off of single ip and single Ethernet port.
While searching for a backup method today I came across Clonezilla. I was wondering if this was the right thing for me and since I needed to backup my roommates PC for a reformat and install of Windows I decided I would give it a try, but only if it would work. I didn't want the hassle of going into the main part of the house and finding out what cord was what as there is a cable modem connected into a switch (4 static IP's with internet) and one port of the switch hooked to a router) Anyways, didn't work he was on the router I was on the switch)
But this got me thinking. When I setup my server to do this, during one of the setup scripts it said it was setting up Internet access for client machines and that it was assigning them IP addresses threw a DHCP server that it had installed.
So, I dug up the hub connected the internet cable to hub up link and Server 1 on port 1 Server 2 on port 2 and Windows on port 3 The main server gets the internet provided IP address and routes it to the hub via a virtual interface. Server 2 is configured for DHCP and the windows box, It was set to get info automatically but it didn't fill the DNS info so I had to manually do that (just a heads up) I decided to use OpenDNS Servers (208.67.222.222 & 208.67.220.220) but im sure putting in the gateway IP address would have worked too.
So, by now if you need this I am sure you are excited and want to get to it. Like i said there are probably other ways of doing it, ways that don't involve you installing clonezilla and DRBL, maybe even just DRBL is needed, maybe one of them installed whats needed as a dependency- all I know is it works, if you know - elaborate so people know, but hey- this way not only do you have internet access on all PC's you can deploy custom images to them as well.
I have used the information available at wiki.debian.org/iwlagn to install firmware etc for my Intel Pro Wireless 4965 card.According to the network applet the connection is good, but it only seems to work when my ethernet cable is plugged in.I get no connection without the cable in, even though clicking on "edit connections" showshat ethernet is shown as "device not managed".With the cable plugged in I can get emails. Iceweasel will connect to the internet, but Epiphany will not.Without the cable I get no internet connection at all
View 9 Replies View Related