Fedora Hardware :: Prevent Automounting Of Canon 450D

Mar 28, 2010

I have a Canon 450D which only supports PTP mode, not USB mass storage mode. When I connect it, it gets automounted and I can browse it with Nautilus. However, when it is mounted for browsing, gThumb cannot access it.To import the photos using gThumb, I have to manually unmount it from Nautilus.Is there a way I can prevent this camera from being automounted? I don't want to disable all USB automounting, because I also use various USB flash disks which I want to be automounted.

View 4 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Nautilus Not Mounting Canon 450D?

Apr 9, 2011

so i'm having an issue when I'm plugging in my Canon 450D. I plug it in, the red activity light blinks and "Busy" is displayed on the LCD screen, but after about 30 seconds, it disappears, and all the while, it doesn't get mounted by Nautilus. I've checked Nautilus' media preferences, and verified this behaviour when set to "Auto mount" or "Ask me what to do". I assumed that it just meant that maybe it wasn't being detected by my laptop, but if I open Shotwell, it appears in the device pane to the left, but again, only for 30 seconds. Here's a shot of my message log:

Quote:

Apr 9 20:20:12 wegonix kernel: [ 4883.781092] usb 1-5: new high speed USB device using ehci_hcd and address 11
Apr 9 20:20:41 wegonix kernel: [ 4912.775528] usb 1-5: USB disconnect, address 11

As you can see, my system sees it, but no application - other than Shotwell - sees this and i guess it consequently times out. I've yet to see whether any other USB drive does this, and i'll try my iphone in a bit. This used to work about 2 weeks ago...

View 6 Replies View Related

Fedora :: Stop Automounting Of USB Devices?

Jul 20, 2009

How do I stop automounting USB devices in Fedora 11?I have put the following in a file under /usr/share/hal/fdi/policy/10osvendor/01-stop.fdi. I have even put a copy in /etc/hal/fdi/policy/. Nothing works.

<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>

[code]...

View 1 Replies View Related

Fedora :: Automounting Usb Drives In Fluxbox

Feb 10, 2010

I have researched this for a couple of days and I am not getting anywhere. My Fedora 12 install is working just fine with the standard gnome desktop. I can plug in any usb drive and it is recognized and mounted with a link on the desktop. But I want to use Fluxbox. I installed and am running FB just fine except that I can't get usb devices to be recognized and mounted.I don't need a link on the desktop but an entry in /media would be nice.

I am thoroughly confused about which method I should be using to do this simple task. I created a HAL policy for my trackpad to work. Do I need to do something similar for the usb? I have read about udev rules but they seem to be concerned with NOT mounting usb devices. I also read about autofs and thunar but it seems like there should be a much simpler approach and I have certainly missed it.

View 1 Replies View Related

Red Hat / Fedora :: Stop Automounting Other Partitions

Jun 1, 2009

I have F9 on a laptop that dual boots with WinXP.When i log in and the desktop shows that the NTFS partition is mounted with a shortcut on the desktop. Is there a way to make it not automount? Trivial inconvenience, but i thought i'd ask anyway.

View 6 Replies View Related

Fedora X86/64bit :: Music CD Inserted Isn't Automounting?

Jun 12, 2009

I presume automount of drives (dvd etc.) is still something fedora does , so is anyone else not seeing this occur,,fedora 11 RC > fedora release ( yes I have fedora-release here) and it a music CD inserted isn't automounting or asking me to play it...It's working with kde cd player..but rhythmbox and amarok both aren't sweeing music cd and I can't figure out how to make them see it

View 1 Replies View Related

Fedora Hardware :: Plextor DVD Drive Not Automounting

Jul 5, 2011

I upgraded to F15 and now my Plextor DVD PX-712A drive will not mount.My CD-ROM will mount fine.My optical drives kept auto closing right after opening, but I did find a solution in this fourm to that problem which was editing the sysctl.conf file.But like I mentioned I cannot get any DVD rom to mount properly. I have used disk manager and I can see the DVD drive listed.I have told disk manager to mount the DVD but I still cannot find it in Dolphin.Also, a strange problem is that in Disk Manager trying to speed test any of my optical drives fails, it says that the transfer rate is too slow to measure.

View 1 Replies View Related

Fedora :: Automounting Hard Drives Other Than The System Drive

Oct 5, 2009

I've installed Fedora 10 short time after it came out. Now I am having some problems unmounting thes drives on restart or shutdown. It hangs at the stage of 'unmounting file system'. I've looked into this matter and discovered that those drives are automatically mounted and shown on the Gnome file browser. As the /etc/fstab indicates, it is not mounted by it. I must have done something to have all the hard drives shown in the file browser and now Fedora seems to be unable to unmount them.

Quote:

#
# /etc/fstab
# Created by anaconda on Mon Sep 7 20:25:11 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'

[Code]....

View 4 Replies View Related

Fedora :: Disable Automounting Removable Media When They Inserted (CD And DVD)?

Dec 23, 2010

I want to disable automounting removable media when they are inserted, especially CD and DVD. I use F13 and Gnome. I went through System/Preferences/File Management/Media and set everything to "Do Nothing", see below:

I have installed gconf-editor and verified that all automounting options are unchecked:

according to "/sbin/chkconfig --list" haldaemon is off and automount is not installed.
What else should I check?

I would not mind if USB (flash) disks were automounted

View 3 Replies View Related

Fedora :: Stopping Automounting Filesystems In Fedora 10

Mar 8, 2009

Fedora automounts my hardisk partitions on the desktop. This creates too much clutter on the desktop. How can I make Fedora stop automounting other partitions. I looked in /etc/fstab, but could not locate any entry relating to this. Any body know how can I achieve this ?

View 4 Replies View Related

Fedora :: Automounting Drive With Full Access On Dual Boot System?

Feb 24, 2010

I used to know how to access and rw other linux drives and do the fstab magic. For some reason I've lost my touch. I just want the drive to automount and have full access. I don't need a beginners tutorial on mkdir and fdisk -l. Is there a foolproof way to get my drives to do what I want? I dual boot fedora and ubuntu, but have the same issues on both.

View 1 Replies View Related

Fedora :: How To Install Canon Scanner

Mar 16, 2010

I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool

View 7 Replies View Related

Fedora :: Canon I320 Driver For 14 ?

Jan 23, 2011

I couldn't find a driver for Canon i320 for Fedora 14. Is there any way to get the driver ?

View 3 Replies View Related

Fedora :: Networking F11 With Windows XP (Canon Printer)

Aug 25, 2009

I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.

View 6 Replies View Related

Fedora :: Get A Canon MP210 Printer/scanner To Run?

Sep 21, 2009

I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.

View 5 Replies View Related

Fedora Hardware :: Canon Mp 260 Is Missing Driver ?

Jul 26, 2011

In korokaa15x64 I can't install a canon mp260 combi because no driver is available. where I can find a driver for this common combi type?

View 5 Replies View Related

Fedora Hardware :: Couldn't Print Using Canon LBP 2900B

Feb 4, 2010

Recently brought new printer Canon LBP 2900B.

I have downloaded drivers form canon website ([URL])

When I switch on the printer, it will be detected.

But when I click print button in any of document, it won't start printing. In job queue status shows "Processing". I have waited for 15 minuets printing didn't started.

View 14 Replies View Related

Fedora Hardware :: Canon IP3600 On F13 - Two RPMs Installed

Jun 3, 2010

Okay, according to CUPS, I've installed this printer, but whenever I try to print, it tells me it's completed, but the printer does nothing. So I search a little and found some Canon Linux drivers from Canon Europe. I downloaded the RPM version, which gave me two files: cnijfilter-common-3.00-1.i386.rpm and cnijfilter-ip3600series-3.00-1.i386.rpm. So I installed the common file, followed by the ip3600 file, using rpm -ivh [file name] at command line. The RPM install went fine. However, what do I do now? I tried searching the CUPS list of printers, and nothing new is listed (oddly, CUPS seemed to have drivers for virtually every iPxxxx printer except the 3600 when I first installed). I tried restarting cups, no difference. I even tried to print (suspecting nothing had changed, but hoping) and it still thinks it's printing, but nothing comes out. What did installing those two RPMs do? Did it put a file somewhere that I need to reference in the cups admin page?

View 5 Replies View Related

Fedora :: Playing (Canon Camcorder) MTS Video Files

Jul 28, 2010

I just got a Canon Vixia HF 200 Camcorder. It stores data on an SD card. I was able without difficulty to copy the files to my Fedora 13 (64 bit) system. There are a bunch of .mts files in a Stream Folder, which I assume contain the videos I made. Some searching with google suggested mplayer might be able to play these videos. When I try that, I get an Mplayer 'boombox' icon playing the audio, but no video.

How to Get info about state of things at present with high definition video.and Linux? If necessary I can use the Windows software that came with the camera, but I would like to do as much as I can with Fedora. To start, I would like to play the videos and also to write them to a DVD which I can play on my DVD player, BlurRay if possible.

View 14 Replies View Related

Fedora Hardware :: Canon IP1700 Printer Not Talking

Sep 22, 2010

I am one of the many people who are having many problems getting the Canon ip1700 pixma printer to work with Linux. I think that it can be done. I've followed every step that I could on this page: [URL] Everything goes fine until I enter the username and password on CUPS, using my "root" and my root password. I get this annoying google chrome thing, "aw, snap, this page can't load..." I really need to use my printer.

View 9 Replies View Related

Red Hat / Fedora :: Canon 3108b Laser Printer Driver ?

Jan 8, 2010

I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?

View 1 Replies View Related

Red Hat / Fedora :: Installing Proper Drivers For Canon IR3300 MFD

Jan 7, 2011

We are using Red Hat Enterprise AS 3.0. We are not able to configure the proper drivers for Canon iR3300 MFD. If anybody have achieved this, would like to know the procedure for the same.

View 2 Replies View Related

Hardware :: Canon MX310 Suitable Driver For Fedora?

Jan 27, 2011

Many have suggested that since Canon does not offer a Linux driver for the MX310, one could use the driver for the MP150. I tried that but found the results very sketchy. After a bit of digging, I found a driver from Canon for the MX340 which works extremely well for the MX310 and allows much better configuration. It wasn't easy to find, so here's the URL in case you want to try for yourself: [URL]

The package (located in the tar file) that worked for me is cnijfilter-mx340series-3.30-1-i386-rpm. Good luck!

View 1 Replies View Related

Fedora :: Install Canon PIXMA IP1900 Under F13 AMDx86_64 Plattform?

Jul 6, 2010

I have installed Fedora 13 on AMD x86_64 plattform. I want to add the Canon PIXMA iP1900 printer, but cups doesnot have in the repo. (127.0.0.1:6xx). Then i visited canon-europe webpage, and i downloaded the rpm version of the printer driver. But it no works! and the printer isnot added to the repolist of cups.Who can i solve this problem in Fedora 13 ?

View 1 Replies View Related

Fedora Hardware :: Canon S100 Printer Doesn't Print

Sep 6, 2010

F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:

[code]...

View 14 Replies View Related

Fedora Hardware :: Can't Detect Scanner Canon Canoscan 5600f?

Jan 2, 2011

fedora can't detect my scanner 5600f !!how can i do ? i can't scan pictures ? is there any solution ??

programming ?? driver ?? can i do somthing with sane genesys and GL841 chipset??

View 1 Replies View Related

Fedora :: Canon Lbp3000 Laser Printer - Make It Work Under F14 And F15?

Jun 17, 2011

Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.

View 5 Replies View Related

Fedora :: How To Prevent Lockout

Jun 26, 2011

I know I need a better title, but don't have one.

The problem is when watching a video F15 Gnome decides to send me to the unlock screen. Think that's what it's called. So I have to type in my pass.

A little bit later, same thing. So how can I prevent it from happening?

View 2 Replies View Related

Fedora Hardware :: Canon MX860 Multifunction Wireless Printer Not Detected

Jun 2, 2010

I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?

View 5 Replies View Related

Fedora Hardware :: Can't Install My Multifunction Printer CANON I-SENSYS MF4690PL

Jun 21, 2010

I installed Fedora 13 and can't install my multifunction printer CANON i-SENSYS MF4690PL.The scanner works fine (very odd) only printer not working.Is there a specific driver for this printer and if so, how to install this driver on Fedora 13? The MF4690PL and GNU/Linux I get this in terminal:

Code:
[root@Philip philip]# system-config-printer libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.How do I now if the kernel has support for my printer ?

[Code]...

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved