I presume automount of drives (dvd etc.) is still something fedora does , so is anyone else not seeing this occur,,fedora 11 RC > fedora release ( yes I have fedora-release here) and it a music CD inserted isn't automounting or asking me to play it...It's working with kde cd player..but rhythmbox and amarok both aren't sweeing music cd and I can't figure out how to make them see it
View 1 RepliesI want to disable automounting removable media when they are inserted, especially CD and DVD. I use F13 and Gnome. I went through System/Preferences/File Management/Media and set everything to "Do Nothing", see below:
I have installed gconf-editor and verified that all automounting options are unchecked:
according to "/sbin/chkconfig --list" haldaemon is off and automount is not installed.
What else should I check?
I would not mind if USB (flash) disks were automounted
I use Ubuntu 64bit,with gnome 2.30.0
I have a problem with conky,i cant see weather and music in conky.
The code for conky is:
Code:
It seems as though k3b will only recognise my burners when the system first boots for about 5 minutes. Once time is up k3b will not see my burners.. I tried burning a disk using k3b soon as I booted and it lost the drives mid burn.
The drives are ide and I've read about the drivers for cdrdao possibly not being correct but when I check to see if cdrdao sees the drives using command line it does give me both drives. So I assume that is working properly. When a cd is inserted it doesn't automount the cd either. Am I having issues with HAL? or is k3b just that flaky? ISB thumb drives mount fine..I have checked the fstab and there is no mention of cdrom mount points. IS this normal with the newer versions? Is this possibly my issue.. I was under the impression that with HAL the mount points are for ease of use in the fstab.. (not that you could mount a blank cd anyway...)
How do I stop automounting USB devices in Fedora 11?I have put the following in a file under /usr/share/hal/fdi/policy/10osvendor/01-stop.fdi. I have even put a copy in /etc/hal/fdi/policy/. Nothing works.
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
[code]...
I have researched this for a couple of days and I am not getting anywhere. My Fedora 12 install is working just fine with the standard gnome desktop. I can plug in any usb drive and it is recognized and mounted with a link on the desktop. But I want to use Fluxbox. I installed and am running FB just fine except that I can't get usb devices to be recognized and mounted.I don't need a link on the desktop but an entry in /media would be nice.
I am thoroughly confused about which method I should be using to do this simple task. I created a HAL policy for my trackpad to work. Do I need to do something similar for the usb? I have read about udev rules but they seem to be concerned with NOT mounting usb devices. I also read about autofs and thunar but it seems like there should be a much simpler approach and I have certainly missed it.
I have F9 on a laptop that dual boots with WinXP.When i log in and the desktop shows that the NTFS partition is mounted with a shortcut on the desktop. Is there a way to make it not automount? Trivial inconvenience, but i thought i'd ask anyway.
View 6 Replies View RelatedI can't seek music cause i can't find that little circular on music track bar. I update fedora but there was not any good news for rythmbox
View 2 Replies View RelatedI've searched upon numerous links for a "fix" but they are either for older releases of fedora, or, I was able to make appropriate changes to the F12 KDE4 release such as the F11 how to fix pulseaudio and vlc guide in this forum
Problem: In order to get the sound to play on my system I have to go to PulseAudio Device Chooser and select default server,sink, etc. every login. I thought it was suppose to change it "permanently" , getting more specific here, when ever I play music in vlc I tend notice gaps/skips in my music very short skips .5 to 1 second sometimes 2 - 3, just now I was playing music flipping through some tracks then I am greeted with a nasty sound I cannot describe. Does anyone have a proper fix for this? Only result I came upon I have not tried yet was something with hda intel sound card and power settings, which feel will not work anyway
Here is my sound card: Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Also not to mention, I use to get pop-ups notifying me of pulseaudio device not being to be found and asked to forget this device
I upgraded to F15 and now my Plextor DVD PX-712A drive will not mount.My CD-ROM will mount fine.My optical drives kept auto closing right after opening, but I did find a solution in this fourm to that problem which was editing the sysctl.conf file.But like I mentioned I cannot get any DVD rom to mount properly. I have used disk manager and I can see the DVD drive listed.I have told disk manager to mount the DVD but I still cannot find it in Dolphin.Also, a strange problem is that in Disk Manager trying to speed test any of my optical drives fails, it says that the transfer rate is too slow to measure.
View 1 Replies View RelatedI've installed Fedora 10 short time after it came out. Now I am having some problems unmounting thes drives on restart or shutdown. It hangs at the stage of 'unmounting file system'. I've looked into this matter and discovered that those drives are automatically mounted and shown on the Gnome file browser. As the /etc/fstab indicates, it is not mounted by it. I must have done something to have all the hard drives shown in the file browser and now Fedora seems to be unable to unmount them.
Quote:
#
# /etc/fstab
# Created by anaconda on Mon Sep 7 20:25:11 2009
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[Code]....
I have a Canon 450D which only supports PTP mode, not USB mass storage mode. When I connect it, it gets automounted and I can browse it with Nautilus. However, when it is mounted for browsing, gThumb cannot access it.To import the photos using gThumb, I have to manually unmount it from Nautilus.Is there a way I can prevent this camera from being automounted? I don't want to disable all USB automounting, because I also use various USB flash disks which I want to be automounted.
View 4 Replies View RelatedFedora automounts my hardisk partitions on the desktop. This creates too much clutter on the desktop. How can I make Fedora stop automounting other partitions. I looked in /etc/fstab, but could not locate any entry relating to this. Any body know how can I achieve this ?
View 4 Replies View RelatedI used to know how to access and rw other linux drives and do the fstab magic. For some reason I've lost my touch. I just want the drive to automount and have full access. I don't need a beginners tutorial on mkdir and fdisk -l. Is there a foolproof way to get my drives to do what I want? I dual boot fedora and ubuntu, but have the same issues on both.
View 1 Replies View RelatedI am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
Edit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing
Iam trying to install F15 64bit but I failed my hardware as folow
mb : asus m5a88m
cpu: amd phenom ii x6 1100t
ram: 8 gb 2x4gb Kingston 1333
hdd : wd 1tb sata3
wd 1tb sata2
vga: ati 4250 b/in
installation media: downloaded dvd image burned the image installed correctly inside vmware and work as expected but the media boot to the first screen quistion and when press ok for new installatin the answer is a serious of errors messages (a lot of it). did my hardware not compatible??
I have Intel Pentium Dual Core E2180 / 2 GHz processor. i just upgraded my system with 4 memory sticks i.e. 7GB of RAM due to my requirements. Now the issue that i am facing is that my 32bit fedora system does not showing and suppoting more than 3.XX gigs of RAM when i consult "/proc/meminfo", "free -m" and "top". Now i have done two thing, first i have installed a PAE version of kernel. In result of this my system become two slow with the following error at startup. Error: starting udev: wait timeout. will continue in the background <Failed> Secondly, i installed a 64bit version of Fedora 10 but still it showing not more than 3GB of memory. Also a kernel bug system alerts me of not supporting more than 3gigs of RAM and ask me to send that bug to[URL]
View 14 Replies View RelatedToday I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
How can I remove options from the menu that automatically appears when a CD is inserted? I thought that these settings would be in the Preferred Applications but no luck.
View 9 Replies View RelatedI'm an experienced Ubuntu user and have a problem with a certain USB pen drive. It doesn't seem to be recognised in Ubuntu and I can't browse it. Other USB sticks do work and this drive works in Windows.
Code:
mick@mick-laptop:/media$ dmesg | tail -20
[ 2494.011373] sd 3:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[code]....