Fedora Hardware :: Canon IP3600 On F13 - Two RPMs Installed
Jun 3, 2010
Okay, according to CUPS, I've installed this printer, but whenever I try to print, it tells me it's completed, but the printer does nothing. So I search a little and found some Canon Linux drivers from Canon Europe. I downloaded the RPM version, which gave me two files: cnijfilter-common-3.00-1.i386.rpm and cnijfilter-ip3600series-3.00-1.i386.rpm. So I installed the common file, followed by the ip3600 file, using rpm -ivh [file name] at command line. The RPM install went fine. However, what do I do now? I tried searching the CUPS list of printers, and nothing new is listed (oddly, CUPS seemed to have drivers for virtually every iPxxxx printer except the 3600 when I first installed). I tried restarting cups, no difference. I even tried to print (suspecting nothing had changed, but hoping) and it still thinks it's printing, but nothing comes out. What did installing those two RPMs do? Did it put a file somewhere that I need to reference in the cups admin page?
View 5 Replies
ADVERTISEMENT
Mar 4, 2011
For all those who are having trouble running a canon ip3600, I am running a canon ip3600 networked from a win 7 machine. I found i could get it to print using the ip4600 driver on my ubuntu 10.10 machine. Prints test pages, not sure what it will be like with graphics, as you cannot select colour output of KMY PK C so i am using KCMY. But it does print text ok.
View 2 Replies
View Related
May 1, 2010
i have a input text file contain 10 rpms and they are old versions i need a shell script to check if these rpms is installed or not and if the newer version is installed and i need all the results in one output text file contain every rpm and its condition ( the same) or (new )or( not installed)
View 3 Replies
View Related
May 18, 2010
I have a disk of all the rpms (just the rpms) of RH Ent. 5.1. I needed to intall some packages from it.
For that I created a local repository.
Following is what I did:
1. mounted DVD in /media
2. Issued createrepo on /media (Now the packages are in /media/mycdrom/RHE5Rpms and the repodata is in /media)
3. I added the following in the /etc/yum.conf
Now when I try to install, for example, qt4-devel, it can resolve the dependencies for one level. For example, it resolves libpng-devel (which is needed by qt4-devel), but it fails to resolve libpng (which is needed by libpng-devel). But libpng package is both available in the DVD and is already installed on the machine.
Following is the tail of error messages I get after issuing the command 'yum install qt4-devel'
All the above packages are available through the DVD and already installed on the machine.
View 3 Replies
View Related
Jul 17, 2010
Is there a command to know " From where a specific RPM package was downloaded & installed ( The full HTTP/FTP path ) " ? For example, if I had previously installed Firefox from here [URL] is there a specific rpm query, or any other place, from where I can get the full ftp path back.
View 1 Replies
View Related
Feb 27, 2011
My first day as Ubuntu 9.10 user. Downloaded drivers from Canon Europe and installed .deb package using G and all seemed ok but no actual printing occurs. System says all installed ok and indicates printing occurring but no physical printing happens. Checked printer on another PC and all ok.
View 1 Replies
View Related
Apr 12, 2011
I'm just wondering if there is an easy way I can generate a list of RPM packages which have been forcefully installed on the system (got a couple of servers transitioned).
All servers are RedHat-5 if that matters.
View 1 Replies
View Related
Aug 9, 2011
Normally I find everything I need either in the documentation or forum, but it's been months, and this time I'm stumped. I'm posting the results of my latest tests, so I'm really sorry about the length of this post.
I can't play DVDs unless they've been burned by myself or a friend. I had no problems until around the beginning of April. I was running 11.2 on both my laptop and desktop. I think an update changed something. This was before 11.2 was officially retired a week or so later. I wanted to upgrade to 11.4 anyway, so I began with my laptop. During installation I wiped everything from my hard disk by creating new partitions and formatting them. After installation I installed the multimedia packages using one-click (opensuse-guide.org, not opensuse-community.org, although I did read what they said). I know one-click is not ideal, but I was curious. The result was that I still couldn't play DVDs.
I did a fresh installation, just to be on the safe side. This time I installed the packages according to Multi-media and Restricted Format Installation Guide by caf4926. But I still couldn't play DVDs, so I went through the thread Check your multimedia problem in ten steps. Then I ran mmcheck (v2.35). I tried a few times, experimented, and in the end did another fresh install.
In the meantime, on my desktop, which still has 11.2 on it, I found the file which had been changed and changed it back, so I could play DVDs on it again. It was in /etc/udev/rules.d/, 70-persistent-cd.rules. This does not appear to be the problem in 11.4 on my laptop.
I have again installed the packages according to the multimedia installation guide, and done the ten-step check and run mmcheck and these are the results as they stand:
I couldn't find a package called mplayerplug-in. I used zypper to look for it.
I tried installing the totem packages in a previous installation, but they didn't make a difference, so I left them out this time.
I deinstalled my jdk, but it doesn't seem to have made a difference, except that I get an error notification everytime I want to use LibreOffice. And I need it, so I'm putting it back soon.
So, these are my packages:
And this is what happens when I try to play a DVD using Kaffeine (since I don't an error message except from Kaffeine, and I've forgotten where my logs are):
And then comes Read error from: Error reading from DVD over the GUI.
And nothing else happens... I get no feedback from smplayer whatsoever. It opens, trys to read the DVD, and sits there. Even on the console.
View 4 Replies
View Related
Jul 13, 2009
Anybody know of any Firefox 3.5 final RPMS for Fedora 10? I looked a rebuilding the Fedora 11 RPMS for Fedora 10, but the other packages requiring an upgrade as well is getting out of control.
View 7 Replies
View Related
Nov 19, 2009
I'd like to confirm if the latest updates of a couple of rpms is causing me a problem. I'd like to downgrade these rpms to an intermediate version (greater than the original F11 versions, but less than the latest version). I've looked on a few mirrors, and all I can find is the latest update. Are intermediate versions of an rpm discarded when they're replaced with new versions? Are these intermediate versions available some place?
The two rpms I'm interested in are:
gstreamer-plugins-good-0.10.16-1.fc11.i586
gstreamer-plugins-base-0.10.25-1.fc11.i586
View 2 Replies
View Related
Dec 18, 2009
I am trying to create a local repository of installed RPMs on my workstation. Using the 'rpm -qa' I can gather the installed RPMs on my workstation. Is there a way for me download all these RPMs using the output of 'rpm -qa'? 'yum --downloadonly' will allow me the option of downloading without installing. Since the installed RPMs are not cached in my workstation I have to download these RPMs again. If I have a local repo then it will be easier for me restore my installation without having to rediscover the packages needed. I am looking for how I can download multiple RPMs.
View 5 Replies
View Related
Jun 3, 2010
I have noticed that the updates to my f12 64bit systems are running longer due to the fact that fewer fedora updates are delta rpms. Why is this. I know that rpmfusion updates and other third party updates are not covered.
View 9 Replies
View Related
Jun 12, 2010
I know there is a command that will show what rpms are installed on a machine that are no longer available in a yum repository, but I can't remember what it is! It is useful to identify packages left over after an upgrade that are no longer needed, or to identify third party software.
View 2 Replies
View Related
Jul 10, 2010
I have been running f13 ever since it was released. Evidently the kmod-rt2870 rpms are never deleted when older kernels are removed. When I tried to do today's update the Package Manager and yum complained that some of the older kmod-rt2870 packages left over from fedora 12 were missing kernel dependencies. The kernels have been missing for a long time. I don't know why the package manager started complaining today.
I tried
1) yum clean all
2 rpm --rebuilddb
3) removed the /lib/modules directory corresponding to the old kernels
and the problem persisted.
I finally removed all of the kmod-rt2870 rpms what where originally installed in fedora 12 and I was finally able to complete the update. Why did the package manager suddenly start complaining about the missing kernels?
View 1 Replies
View Related
Nov 16, 2010
I am looking for openssh 5.1 and 4.3 source rpms. Where can i download them ?
View 3 Replies
View Related
Jan 16, 2010
I am looking for xmms-mp3 and lame rpms for FC12. where can i get those packages ?
View 2 Replies
View Related
Dec 14, 2010
I just installed F14 (so far I like it ). I had F13 but decided to wipe the old OS and install F14 fresh. In the course of replacing all of my old programs, I had to download several .rpms like the .rpms for the RPMFusion repos and the .rpm for Adobe Reader. After downloading the .rpms to a download directory I ran yum localinstall to install them. The installations went well and I didn't have any problems.
However, now the packages are showing up as updates which need to be installed in the software updates window. I also ran yum check-update and they are showing up as updates which need to be installed. I tried deleting the .rpms and also running yum clean all but they are still showing up as updates which need to be installed.
View 6 Replies
View Related
Apr 19, 2011
Using yum installs the binary version of the software. Is it possible to use yum to download the src rpms , because i have seen one repo called Fedora src. I am using Fedora 11.
View 5 Replies
View Related
Apr 21, 2009
I am trying to install f10 on an old dell dimension 2400 with an old video chipset. Everything was working pretty smooth until I tried installing an .rpm file from a flashdrive. At first, it looked like it was installing the rhpxl file but gave a warning message that said
warning:rpmts_HdrFromFdno:Header V3 DSA signature: NOKEY, Key ID 4ebfc273
then says the public key will not be installed. Is there a file/command that I can download and run from a flash because I have no capable internet connection because for some reason linux doesn't see it in the install.
View 2 Replies
View Related
Jun 4, 2010
I've just recently started using Fedora again and have a question about BOINC.I see that Fedora 13 is using 6.10.45, but the latest recommended release is 6.10.56.What is the timing on updated RPMs for new BOINC versions? Or is there a guide to updating manually, which I've been unable to locate?
View 4 Replies
View Related
Mar 28, 2011
Have project to move to RHEL5 with Oracle11g. During process, went to Red Hat Network and they were not currently available. Is there another source of RPM's for installation on RHEL5?
View 1 Replies
View Related
Mar 10, 2010
I have a home network with 6+ x86_64 machines, all with similar setups. In the past (FC10 and before), I've had common package repositories (e.g /var/cache/yum/fedora/packages) shared via NFS with all the machines (and with keepcache=1 in /etc/yum.conf). That way, a given RPM only got downloaded once; the other machines would then pull it from my local package repository. And I don't mind the disk usage of keeping one copy of all my old RPMS around.
It seems that while DRPMS is great for a single machine, it doesn't make sense in my case. If I have to download the DRPM 6 times (and take the time/CPU hit to recreate the RPM 6 times), I might as well have downloaded the RPM once and been done with it. Is there a not-too-convoluted method to keep a common package repository across multiple machines even with DRPMS? Or, better, to have that first downloading machine pull a DRPM, generate the RPM, then save the RPM in the local shared repository?
View 4 Replies
View Related
Feb 8, 2010
It is not difficult to set up a regular local repository (rpms) and manage a fedora system with it using yum. I wonder if the process is same for deltaRPMS. Has anyone successfully set up a local deltaRPM repo or is this something reserved for online repos? How does one achieve this?
View 5 Replies
View Related
May 9, 2011
i have a question about rpm.pbone.net, www.rpmseek.com and these kind of pages: Can I trust these sites and is it secure to install rpms from these sites on enterprise workstations and servers?
View 1 Replies
View Related
Mar 16, 2010
I have a Canon Lide 100 flatbed scanner, however xsane 0.997 can't detect it.Just wanna ask you you guys add a scanner ?When I do a command line, this is what I get.Quote:[root@localhost]# sane-find-scannerfound USB scanner (vendor=0x04a9 [Canon], product=0x1904 [CanoScan], chip=GL843) at libusb:001:003However when I run the "Scanner Tool" from Application --> Graphics --> Scanner Tool
View 7 Replies
View Related
Jan 23, 2011
I couldn't find a driver for Canon i320 for Fedora 14. Is there any way to get the driver ?
View 3 Replies
View Related
Aug 25, 2009
I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies
View Related
Sep 21, 2009
I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies
View Related
Jul 26, 2011
In korokaa15x64 I can't install a canon mp260 combi because no driver is available. where I can find a driver for this common combi type?
View 5 Replies
View Related
Feb 4, 2010
Recently brought new printer Canon LBP 2900B.
I have downloaded drivers form canon website ([URL])
When I switch on the printer, it will be detected.
But when I click print button in any of document, it won't start printing. In job queue status shows "Processing". I have waited for 15 minuets printing didn't started.
View 14 Replies
View Related
