Fedora Hardware :: Canon IP1700 Printer Not Talking
Sep 22, 2010
I am one of the many people who are having many problems getting the Canon ip1700 pixma printer to work with Linux. I think that it can be done. I've followed every step that I could on this page: [URL] Everything goes fine until I enter the username and password on CUPS, using my "root" and my root password. I get this annoying google chrome thing, "aw, snap, this page can't load..." I really need to use my printer.
View 9 Replies
ADVERTISEMENT
Jul 7, 2010
I have recently lost the use of my schools printers (schools out of session), and found myself in need of printing a document. I have a Canon Pixima ip1700, but I can only find software for a wide variety of Windows OS and a Mac. Unfortunately for this situation, I'm using Ubuntu 10.04. I've searched through the Software Center, and found an assortment of printer related software, but I don't know how to use any of it to allow my computer to print this single, lonely page.nDoes anyone have any advice as to how to connect a computer to a printer? Beyond putting the long cord into the USB thingy, that is, and preferably without using TurboPrint, or any other software that leaves a banner?
View 1 Replies
View Related
Aug 25, 2009
I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies
View Related
Sep 21, 2009
I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies
View Related
Jan 8, 2010
I am having a Canon 3108B printer But no driver/rpms for my fedora 9. I can going to install fedora 12. Can i download driver for this printer also? if so from Where?
View 1 Replies
View Related
Sep 6, 2010
F13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:
[code]...
View 14 Replies
View Related
Jun 17, 2011
Has anyone installed successfully a Canon LBP3000 laser printer?I would like to make it work under F14 and F15.
View 5 Replies
View Related
Jun 2, 2010
I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies
View Related
Jun 21, 2010
I installed Fedora 13 and can't install my multifunction printer CANON i-SENSYS MF4690PL.The scanner works fine (very odd) only printer not working.Is there a specific driver for this printer and if so, how to install this driver on Fedora 13? The MF4690PL and GNU/Linux I get this in terminal:
Code:
[root@Philip philip]# system-config-printer libnotify-Message: Unable to get session bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
(system-config-printer.py:2370): GVFS-RemoteVolumeMonitor-WARNING **: cannot connect to the session bus: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.How do I now if the kernel has support for my printer ?
[Code]...
View 5 Replies
View Related
Jul 31, 2011
I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
View 10 Replies
View Related
Jul 26, 2011
I have been trying to add the Canon Pixmar MG5150 printer to my Fedora 13 setup. I downloaded the drivers and installed them but I keep getting an error saying the pstocanonij failed.
View 5 Replies
View Related
Feb 4, 2011
Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
View 9 Replies
View Related
Jun 21, 2011
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies
View Related
Jan 15, 2010
Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.
View 2 Replies
View Related
Aug 6, 2010
Is there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?
View 2 Replies
View Related
Feb 9, 2010
I tried to install lbp 3108 printer driver for fedora 12. printer is not responding to print command what to do?
View 1 Replies
View Related
Feb 28, 2011
I want to use my Canon Pixima MP600 Printer on Ubuntu, but don't know how. The Ubuntu Documents has support for the MP620. Canon USA doesn't offer drivers for Linux.
View 14 Replies
View Related
Jan 16, 2011
I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies
View Related
Sep 11, 2010
I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies
View Related
Aug 4, 2015
I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
View 3 Replies
View Related
Jun 11, 2010
I am interested in acquiring a Canon MP620 printer scanner. I am looking at the printer list from linux.com, and I don't see it there. Wondering if it works really good with Opensuse.
View 5 Replies
View Related
Nov 27, 2010
I just downloaded and installed openSUSE 11.2. It looks good. Very fast and extremely stable.
My problem is that I use a 'Canon MP280' Printer / Scanner / Copier.
It seems that my printer and openSUSE are not compatible.
OpenSUSE can't find Canon MP280.
View 6 Replies
View Related
Sep 6, 2011
I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.
View 9 Replies
View Related
May 2, 2010
I'm a newcomer to Ubuntu. Have struggled with 9.04 and managed to get my Canon MP620 to work in that version. Now I have upgraded to 10.04 and have problems to get my printer to work again.
View 7 Replies
View Related
Oct 15, 2010
There is not a driver for the Canon Pixma ip1800 Printer in Ubuntu. How do I go about getting this printer to work with Ubuntu 10.10.
View 9 Replies
View Related
Apr 13, 2011
after looking around for hours, i finally gave up and decided to write this post. I need to know exactly what to do to get my canon mx860 printer connected to ubuntu wireless. ive tried nearly everything, but nothing really makes sense and it just doesn't work.
View 1 Replies
View Related
Dec 2, 2010
I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.
View 1 Replies
View Related
Oct 19, 2010
I recently bought a used Canon IP1600 Inkjet Printer. It did not come with the cd-rom to install and set up this printer. I downloaded the driver. And i recieved a message saying my system is not modified.
View 1 Replies
View Related
Sep 16, 2010
I've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?
View 7 Replies
View Related
Aug 4, 2015
My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I cannot solve this package error.
View 2 Replies
View Related
