Fedora Hardware :: Nvida Card 6xxx Seires On F14?
Feb 28, 2011
I have found the commands to install the driver and my card works great and makes my HDTV look cool running Fedora 14. Problem , I have to set my resolution to 1280x768 every time I restart my computer. I try to Save to X Configuration file I get You do not have adequate permission to open the existing X configuration file '/etc/X11/xorg.conf' for writing. You must be 'root' to modify the file. Last time I had to use a CLI like this was in the 80s on an apple.
View 1 Replies
ADVERTISEMENT
Feb 20, 2010
found this in my boot log nvidia.ko for kernel 2.6.31.12-174.2.22.fc12.x86_64 was not found. and the driver is disabled and X is not working correctly. I tried removing the driver "yum remove kmod-nvidia "
then re-installing and rebooting. same issue I went to the fusion site and followed there install guide again same issue. made sure the free driver is blacklisted in grub.conf kernel lines
View 2 Replies
View Related
May 1, 2011
I have installed and removed the Nvidia Drivers via System>Admin>Additional drivers. The dialog tells me that the Current driver is Activated but no in use. I can't seem to find the way to get the driver in use.I'm running 11.04.
View 6 Replies
View Related
Feb 23, 2010
check this out and let me know if you have any ideas or a better way to install this silly thing. At the moment I'm using 185 drivers and I would not mind upgrading to 190 or even 195 versions of the driver.
My video card is a Nvidia 9800 GT 512mb.1- Add repositories to ubuntu 9.04 and 9.10 karmic koala
- For ubuntu 9.10 karmic koala :
You have to add the repository using this command :
sudo add-apt-repository ppa:nvidia-vdpau/ppa
2- Now update or refresh the installation
sudo apt-get update
3- Install the driver :
[Code]...
View 3 Replies
View Related
May 3, 2010
how can i manually install NVIDIA drivers for kubuntu? my computer that has the kubuntu OS is not connected to the web.
View 4 Replies
View Related
Oct 1, 2010
I killed windows and jumped to Ubuntu after thinking about it. I know windows systems very well and been on the PC starting in the DOS age.
First off. I think I have everything going. I had issues with the display and sound. I got the sound working thanks to these forums...but I have "tossed" some code in the command window that I have no clue what it does or if it worked.
I would like to know if my nVIDIA cards are working correctly. My goal is to use WINE or Play On Linux and get World of Warcraft up and going... along with MS OFFICE 2010.
Im still learning the system and where what is so please go slow. What Do I need to do to get system information for help? ANd to check to make sure drivers are loaded and working?
i7 CPU
12 GIG DDR3 PC 15,0000
3 Raptor Drives 10kRPM in Raid 0
1 250 GIG 7200RPM storage drive
2 nVIDIA 285's in SLI
1600W PSU
View 1 Replies
View Related
Dec 17, 2010
I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.
[Code]....
View 1 Replies
View Related
Jan 11, 2010
I just switched from xp on a HP s7613w (gforce 6150 le) to ubuntu 9-10. I can not see anything over 800x600 to select unless i enable the nvida drivers. There are three choices and i have tried them all, After i activate them it will let me select the 1024x768 that i need but the screen is garbled. There will be garbled text till i run the curser over the text then it will stratin up. The buttons on a page will move down and to the right a little bit when i put the cursor over them. When i uninstall the nvida drivers everything goes back to 800x600 and the screen is fine. My monitor is a Sceptre X20 is that helps. I am new to linux so please use easy to follow instructions if you can help me. I tried pc linux and it did the same thing. I like this version better so i am going to try to get it to work.
View 7 Replies
View Related
Jun 10, 2011
There are several things going on here. * Mouse jumps to the side when I click on things when zoom is activated. * After an upgrade in Lucid,I'd start up the computer and everything would be very slow. Windows would open from the bottom and I could not click on anything cause when I tried,the mouse would jump to the side. Zoom slow and clunky. Mouse fireball always turned off. I'd uninstall and reinstall Compiz and that would fix it for about three days and then it's back to the same problems. I end up having to click no effects then click effects (middle button) and it looks for drivers,then I have to reactivate the mouse fireball. This happened every day,day in day out. So I installed Meerkat Sat. and it was fine till this morning,now the same problem has reasserted itself.What can I do? Do I need a new video card?
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: boot=normal chassis=desktop
uuid=00000000-0000-0000-FB6B-0000751A8F2F
*-core
description: Motherboard
[Code]...
View 2 Replies
View Related
Jun 13, 2010
I've looked at the Arch wiki entry for configuring NVIDIA cards/drivers, and I found that you can put the command nvidia-settings --load-config-only into your DE's session startup configs to make it launch automatically upon login. However, I can't seem to figure out how to do this under Xfce. I've already tried modifying /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml with the following:
Code:
...
<property name="Client4_PerScreen" type="bool" value="false"/>
[code]...
View 3 Replies
View Related
Feb 10, 2011
I have a nVIDIA Geforce 8500 GT on my Ubuntu system.and have the latest 260.19.36 driver installed.the Mplayer was from SVN checkout also the latest version.but the configure script from mplayer can't detect VDPAU on my system. just give me the output like this
Check VDPAU .... No If I force Enable the VDPAU. the make process won't be successful.just googled, most article that I can find about Mplayer and VDPAU is out of date.
View 3 Replies
View Related
Jul 21, 2010
I have an EeePC 4g netbook which only has a 4Gb hard drive and I thought I would like to install Fedora 13 on an 8 Gb SDHC card and use it to boot the netbook.
As neither the netbook nor I have an optical drive, I made a bootable USB memory stick using Unetbootin which boots the netbook and could be used like a live CD to install Fedora.
On booting with the live USB stick, with the blank SD card in place, and clicking on the install icon, the installation starts but then there are 2 problems; the first is that the installer appears to want to install to both the SD card and also the USB stick. There is a tick in the box beside the USB stick which I can't remove.
I decided to ignore that and put a tick in the box beside the SD card but when it got to the point where it creates partitions it said "Could not find enough free space for automatic partitioning. Please use another partitioning method"
Surely 8 GB is more than enough space for partitioning, so where am I going wrong and why does it want to install on the USB stick as well?
View 2 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Dec 30, 2009
My soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
View 14 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Dec 6, 2010
How to connect bsnl 3g data card in fedora14. i tried with mobile broadband connection but it is not working
View 4 Replies
View Related
Jun 6, 2010
When the day Fedora13 was released, I downloaded one and installed it. After runing the command:
Quote:
yum install mesa* xorg* fusion* compiz*I can't active 3D effects. But on fedora 12, it takes effect by runing that command. My graphic card is Ati pro 2600 It is maybe the bug of fedora 13. Post added at 05:44 AM CDT Previous post was at 01:23 AM CDT
View 11 Replies
View Related
Mar 31, 2011
How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies
View Related
Sep 5, 2011
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
View 3 Replies
View Related
Dec 6, 2009
i have a little experience with ubuntu but i have had bugs that are not resolvable at this time in ubuntu. so instead of giving wild bill back my pc i am looking for a new distro. my concerns with ubuntu revolve around acpi. no fan control and high temp. the 2nd problem that is almost overlookable is the ata1 softreset error. it usually is no problem but occasionally have to do manual fsck to fix. so heres my laptop specs. toshiba a305d-s6848. amd turion x2 ati x1250 integrated. 3gb ram. 500gb hd vista and ubuntu 9.04 dual boot grub with 100gb ubuntu and the rest vista. so q1= what suse version would be best?
q2= is suse's acpi better? ubuntu runs all features but fan control
q3= is suse as easy to install? or harder
q4= ati graphics i know for my card went to legacy what version still has the ati drivers for my card
q5= is suse easier or harder to work with and get everything working.
i know no linux is or opsys is perfect. im just looking for one that is stable and works the pc correctly. i know its a big thing to ask. i know no one can tell me that. but just looking for suggestions. im thinking of downloading suse and does all the downloads support live sessions.
View 9 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Jan 23, 2011
I recently installed a startech PCI usb expansion card...All went well and all external devices connected show up without a hitch. However a day ago The card/devices just STOPPED. I rebooted and no avail. Rebooted a second time got a IRQ 19 failure error. Then on a third try It showed up and worked fine... This has happened twice. Here's my IRQ print after running cat /proc/interrupts
CPU0 CPU1
0: 132 3 IO-APIC-edge timer
1: 0 146 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
I am assuming that the second to the last entry is the pci usb card. Is there a way to home in more deriectly to find and troubleshot the problem and see if its module or IRQ?
View 1 Replies
View Related
Jun 15, 2010
I recently installed Xubuntu on my old P3 laptop (Compaq Armada E500 if anyone is familiar). The laptop is a bit old, so both wired and wireless networking is done via PCMCIA cards. I have 2 cards installed, one for each purpose. I can't find the dongle for the wired card right now, so I am trying to use the wireless card. I am able to find the network I want to connect to, and type in the password since the network is secured. It tries to connect but then pops up again asking for the password (I know it is correct). Is this card supported by linux/compatible? I tried finding drivers online but the sites that had drivers were down.
View 1 Replies
View Related
Jan 20, 2010
Looking for a card reader/writer that will support most current card types. I am running Fedora 12 x86_64 on a home-grown desktop. Are there any gotchas, that I need to watch for?Also, Internal vs. external, any benefits of one over the other, or is it just personal preference?
View 5 Replies
View Related
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Sep 16, 2010
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies
View Related
Jun 15, 2010
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
View 4 Replies
View Related
Feb 4, 2009
My situation: I have a desktop, with the following sound systems internal to it:HDA IntelSBLive! I also have a Creative Labs webcam connected via USB and another device (VR goggles) which have an audio component.My problem: a fair number of game applications use ALSA card#0 to play games, now pulse's ALSA module is at best lacking, so I don't use that for games. At this point I ahve pulse configured to always use HDA Intel for it's sink, what I would like to do is to configure it so that the SBLive! card is always ALSA card#0, regardless if the 2 USB audio-ish devices are installed. That way pulse can be running and I still get to play the games with native ALSA audio. The trick is how do I force by SBLive card to _ALWAYS_ be card#0 ?Update: there is an easy way, that I should have realized before, which allows for ALSA games to use the SBLive without having it at index 0, below is how to do it:
1) cat /proc/asound/cards
example output (mine):
0 [Intel ]: HDA-Intel - HDA Intel
[code]....
View 2 Replies
View Related
Nov 25, 2009
what command should i write to know what kind/version of nvida i have?
View 9 Replies
View Related
