Ubuntu Multimedia :: NVIDA Video Working Or Not?
Oct 1, 2010
I killed windows and jumped to Ubuntu after thinking about it. I know windows systems very well and been on the PC starting in the DOS age.
First off. I think I have everything going. I had issues with the display and sound. I got the sound working thanks to these forums...but I have "tossed" some code in the command window that I have no clue what it does or if it worked.
I would like to know if my nVIDIA cards are working correctly. My goal is to use WINE or Play On Linux and get World of Warcraft up and going... along with MS OFFICE 2010.
Im still learning the system and where what is so please go slow. What Do I need to do to get system information for help? ANd to check to make sure drivers are loaded and working?
i7 CPU
12 GIG DDR3 PC 15,0000
3 Raptor Drives 10kRPM in Raid 0
1 250 GIG 7200RPM storage drive
2 nVIDIA 285's in SLI
1600W PSU
View 1 Replies
ADVERTISEMENT
Feb 23, 2010
check this out and let me know if you have any ideas or a better way to install this silly thing. At the moment I'm using 185 drivers and I would not mind upgrading to 190 or even 195 versions of the driver.
My video card is a Nvidia 9800 GT 512mb.1- Add repositories to ubuntu 9.04 and 9.10 karmic koala
- For ubuntu 9.10 karmic koala :
You have to add the repository using this command :
sudo add-apt-repository ppa:nvidia-vdpau/ppa
2- Now update or refresh the installation
sudo apt-get update
3- Install the driver :
[Code]...
View 3 Replies
View Related
Jun 10, 2011
There are several things going on here. * Mouse jumps to the side when I click on things when zoom is activated. * After an upgrade in Lucid,I'd start up the computer and everything would be very slow. Windows would open from the bottom and I could not click on anything cause when I tried,the mouse would jump to the side. Zoom slow and clunky. Mouse fireball always turned off. I'd uninstall and reinstall Compiz and that would fix it for about three days and then it's back to the same problems. I end up having to click no effects then click effects (middle button) and it looks for drivers,then I have to reactivate the mouse fireball. This happened every day,day in day out. So I installed Meerkat Sat. and it was fine till this morning,now the same problem has reasserted itself.What can I do? Do I need a new video card?
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: boot=normal chassis=desktop
uuid=00000000-0000-0000-FB6B-0000751A8F2F
*-core
description: Motherboard
[Code]...
View 2 Replies
View Related
Feb 10, 2011
I have a nVIDIA Geforce 8500 GT on my Ubuntu system.and have the latest 260.19.36 driver installed.the Mplayer was from SVN checkout also the latest version.but the configure script from mplayer can't detect VDPAU on my system. just give me the output like this
Check VDPAU .... No If I force Enable the VDPAU. the make process won't be successful.just googled, most article that I can find about Mplayer and VDPAU is out of date.
View 3 Replies
View Related
Feb 27, 2010
I can't seem to figure out how to get the S-Video output working on my T41, and most of the info that I seem to be finding is for older versions before xrandr so files and settings don't seem to match.
I know that it's not a hardware/cable problem because this exact setup works fine under windows (even though there i'm working with a hacked video driver setup since one doesn't exist for any of the "modern" versions of windows, ati radeon 7500 (mobile))
View 2 Replies
View Related
Jun 11, 2010
I am new to Ubuntu & I just upgraded to the 10.4 version. It will not allow me to play any videos on the internet. I have attempted to download Flashplayer & it comes up with an error. I have downloaded the Ubuntu recommended extras file and the videos still don't work.
View 2 Replies
View Related
Aug 31, 2010
I'm having trouble to find the right ffmpeg options to encode a video that can be read on a htc G1 cell phone. I have used several codecs and formats but none is working.
I have followed these instruction to install ffmpeg and x264 [URL]
Here is my ffmpeg config :
Code:
FFmpeg version SVN-r24953, Copyright (c) 2000-2010 the FFmpeg developers
built on Aug 27 2010 22:44:01 with gcc 4.4.1
configuration: --enable-gpl --enable-version3 --enable-nonfree --enable-postproc --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-
[Code].....
View 3 Replies
View Related
Jan 20, 2011
I have ubuntu 9.10. Video is working , but sound not working. When I type, sudo aplay -l, a message **** List of Playback Hardware Devices **** shown. But there is no list. My computer is Intel 810 onboard sound AC '97 (codec ) system. More information in this page: [URL]
View 1 Replies
View Related
Jan 21, 2011
I have a movie CD which works on windows but not on ubuntu. It has vcdplay.exe. (Probably that is the reason it doesn't work on ubuntu) I tried with wine roxio. Doesn't work. I have tried with xine,gxine,vlc and movie player. Inside the vcd, it has an mpegv folder. Inside the mpegv folder there is file avesq.dat. I tried copying it on to desktop, but it wont copy properly and I can't rename the file to just avesq instead of avesq.dat.Any idea how can we make such an auto run CD work on ubuntu?
View 2 Replies
View Related
Apr 17, 2011
This is an Acer Aspire 5720, with a "Mobile GM965/GL960 Integrated Graphics Controller". Although I initially though this was a problem with my installation, so I ran both the Maverick and recent Natty live cds and the s video out only functioned on the Maverick cd. The computer acts as if there is another monitor, but the TV does not display one.
View 9 Replies
View Related
May 3, 2010
i upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
View 3 Replies
View Related
Sep 29, 2010
I am trying to get video streaming working to my iphone. I have everything working fine using Handbrake to convert to .m4v. I takes a 2.2gig and compresses it down to about 550 megs. Then I am just posting a link to a web page for now for the iphone to open.
It all works but after about 4 - 5 mins of video it needs to buffer. Is there anything I can do when encoding them to help? or is there some kind of video staging server that can be used?
View 1 Replies
View Related
Oct 29, 2010
i am using ubuntu 10.10. Video players are not working properly i mean color spectrum is not proper, i uninstallied Gstreamer plugins and again reinstalled but no use.
View 2 Replies
View Related
Feb 16, 2011
I have a ASRock and Ubuntu 10.10. Everything worked fine till I had a short circuit. I started the computer, everything came up fine but the projector I have attached to the HDMI wasn't recognized anymore. I have a GeForce GT 425M and a Panasonic AE-2000 attached to it. The Xorg.0.log has following entries:
[ 12.838] (EE) NVIDIA(1): Unable to find available Display Devices
for screen 1.
[ 12.838] (EE) NVIDIA(1): No display devices found for this X screen
View 1 Replies
View Related
Jul 15, 2011
I have installed transcode to make stabilie videos from handheld camera.
Code:
henning@henning-Lenovo-G550:~$ transcode -J stabilize -i ./Videos/MVI_7727.AVI -y null,null -o dummytranscode v1.1.5 (C) 2001-2003 Thomas Oestreich, 2003-2009 Transcode Team
libdvdread: Encrypted DVD support unavailable.
[Code]....
View 1 Replies
View Related
Jul 15, 2011
I got my UGA video adapter in, when purchasing it I saw on its requirements that is showed it had linux support. However, when plugged it in and restarting no image but the default green image was shown. All wires are check and are plugged in. However, I am not seeing on the computer monitor and no 2nd monitor is found on the monitor settings. Also I would like to note that according to a little research, is that the usb video adapter uses displaylink. I am using Ubuntu 11.04, classic ubuntu and 2D unity desktop.
View 2 Replies
View Related
May 14, 2010
i just upgraded to ubuntu 10.04 from 9.10. videos wont play in firefox anymore. ..... videos require 100% computing power and play at 1 frame every 5 seconds with choppy audio.
View 2 Replies
View Related
Jun 17, 2010
Following is the specification of my user environment.
Ubuntu 10.04 64-bit
Acer Aspire 5542
AMD Turion 2 X2 M500 (2.2 GHz, 1MB L2 Cache)
ATI Radeon HD 4200
4GB DDR2 Memory
500 GB HDD 5400 RPM
Sometimes, both on Gnome MPlayer and Movie Player, videos clips won't play. I use mainly MKV file format and quite often, AVI. I have also installed Ubuntu-Restricted-Extras.
The players will literally not play. When I scroll, it goes through the video clip as if I'm fast forwarding when paused, and then it would still be frozen.
I only use Gnome MPlayer and it's been working fine until like two weeks ago, and when it happens it's also the same for the Movie Player. The problem stays there until I reboot my laptop.
It's random but quite often and it's now doing my head in. It would be nice if any of you gents could give me a good solution without getting involved another player, because I really like Gnome MPlayer.
View 1 Replies
View Related
Jan 10, 2011
I'm having a hard time with my hdmi output on my HP G60-128CA laptop to my HDTV.For now I'm getting video only with the Nvidia 173 driver no mater if I'm on 10.04 or 10.10. In the 2 cases, the sound is not passing. Let me add that all the options in sound preferences are available and all the speakers tests i did whit aplay worked ( no error messages), and no muted devices in alsamixer.In all my web searching one thing is strange to me: i didn't find a lot of problems regarding the hdmi display output whit the latest nvidia driver
View 2 Replies
View Related
Jun 1, 2011
I have been trying to get video import to work on Xubuntu 1104 for nearly 2 weeks without success. All I am trying to do is to drag video from my Sony Digital 8 Handycam via firewire onto my PC for safekeeping and editing.
- Installed Kino, then found it did not work because of a permissions error. Used gksudo to get around that then found it was giving me a firewire error..raw 1394 kernel not loaded or failure to. Did a load of research and de-blacklisted the ohci drivers. Also installed dvgrab to make sure this aspect worked ok
- Used the list command to determine that the PC could see the firewire card, all OK
- Went back, using gksudo, etc to drag the video files in, same error as before
- Went onto the Kino website [URL].. (seems not to be updated that much) and , again, de blacklisted the firewire drivers
- Went to the Ubuntu website and found this.[URL]...but none of that worked for me.
- Searched through the Ubuntu help forums, not yet found a solution that works for me. Installed Ubuntu studio to see if that worked, no joy. I am now at a complete dead end. I am simply trying to find a piece of software that plugs in, works first time without issues, and allows me to initiate video imports as outlined above. Is anyone able to help me resolve this problem please?
My only other option, if I can't solve this, would be to install a copy of Windows 7 on my machine and use e.g a Pinnacle product to solve the problem. That would be a major failure as I much prefer to do this using my current set-up.
View 9 Replies
View Related
Feb 10, 2011
I installed VLC on my openSUSE. After Mplayer and SMplayer. When I try to play movie VLC is closing. Mplayer freezing. SMplayer freezing and no sound...
View 9 Replies
View Related
Jun 6, 2010
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. Do you or does someone you know have the same setup as I do? If so, do they have 1080p video playback working? If so, what driver are they using? I've tried following every guide I could find, but no luck so far. I have libvdpau1 and libvdpau-dev installed. I have the nvidia 195.36.24 driver installed (I used the nvidia installer). I have mplayer installed (which I compiled from source with --enable-vdpau).
I try to run mplayer with this command:
Code:
mplayer -vo vdpau -vc ffh264vdpau path/to/myfile.mkv
I get the following message in my terminal:
Code:
Error opening/initializing the selected video_out (-vo) device.
I have libvdpau-dev and libvdpau1 installed.
After Googling this problem, I found a post that suggested the following steps:
Code:
sudo add-apt-repository ppa:nvidia-vdpau
sudo apt-get update
sudo apt-get install nvidia-glx-195 nvidia-195-modaliases
It turns out that I had already added the nvidia-vdpau repository. However, despite that, I get:
Code:
E: Couldn't find package nvidia-glx-195
The same problem exists for the nvidia-195-modaliases package. Do these packages exist? Is there some other way to get them?
View 9 Replies
View Related
Mar 14, 2011
I'm currently using a Leadtek Winfast PVR2000 capture card with a webcam connected via the composite port. I'm attempting to get the video working with a motion daemon. I used to have the identical setup under Debian and everything worked out of the box. I'm now trying to get this working under Ubuntu 10.10 Server.
When I first boot up the PC, it works great. Randomly (anywhere between 1 and 10 days) I stop getting video. If I kill all motion instances and relaunch it, I'm only able to get a solid green output. I've tried killing off every motion instance again and used other command line apps that just end up giving me a solid black image. After a reboot everything begins working again.
It's not a huge deal if the video feed dies once and a while, but is there any way to avoid rebooting the whole PC? Is there any way to figure out why the capture card can't be accessed after the video feed dies?
View 1 Replies
View Related
May 24, 2011
I have an external monitor attached trough a VGA cable to my laptop PC, with the monitor settings shown below. The problem is that when I have the external display connected, video players such as VLC or MPlayer display a black screen instead of the video, with only the sounds working. If I unplug the monitor everything works fine.
Setup Specs:
Dist: Debian Wheezy
Kernel: Linux 2.6.32-5-686
Gnome Version: 2.30.2
Laptop: Asus Eee PC 1000HE (10" LCD screen)
External Monitor: LG Flatron Wide L204WT, 20'' Widescreen LCD Monitor
View 3 Replies
View Related
May 24, 2011
All of the videos on tennistv are flash. The pre-recorded videos seem to play okay using iceweasel and flashplugin-nonfree but the CPU is very high. When she watches live streamed matches the video stalls and jumps, so I have been trying to figure out why. Tennistv support people say that Linux isn't supported and that streaming is "harder" but don't explain why. They suggested using Google chrome, which did seem to work as well as iceweasel but no better. In desparation I tried XP and it was much better and uses much less CPU.
The only difference I could think of was that flash video hardware acceleration works by default in XP, so I started reading up on Flash video acceleration for linux. The latest Adobe flash player releases appear to support video acceleration, but it's switched off by default. So I upgraded to the latest version and did and then restarted iceweasal if you right click on a flash video you can set hardware acceleration in a tick box, but that seems to be there whether the above is config file is there or not there isn't a live tennis match on again until June 6th. How can I tell if hardware acceleration is actually working or not? The PC is has a 3GHz CPU and 1G RAM. Seems nuts that it can't play video properly. Its a Dell SX280.
View 8 Replies
View Related
Apr 4, 2010
I have been using my HTPC OpenSuse 11.2 for for some months now and everything is great, I'm very happy that I made the switch to Linux. Today for some reason none of my avi files are able to play. When I try a DVD there is also no play back of the video. Sound is working but video is not there. I have tried Kaffeine, VLC, SM Player. All no luck.
Here is the output after checking with Red Dwarf's troubleshoot thread:
Code:
View 9 Replies
View Related
Nov 16, 2010
Recently audio stopped working in my flash video, when browsing in Chrome or Firefox, video is ok, but no audio. I don't know when did it stop to work. My system is SUSE 11.3 with all software up-to-date.
View 9 Replies
View Related
May 5, 2011
I recently took my Compaq Presario 2175US notebook completely apart and resoldered the power jack so that it could be used again (after 2 years of dormancy). After successfully putting it back together (with a handful of leftover screws ) , I was able to successfully install Ubuntu 10.04 (Windows XP seemed silly at this point and I really like using Open Office). Anyway, after a couple of days looking for the wireless driver for the internal wireless, I found the answer and got that working.
Unfortunately, the video does not seem to be working other than a basic VESA configuration. The notebook has the ATI Radeon IGP 320M video chip installed. I have searched for many days (about a week) on the internet for a way to get this working, but have been unsuccessful. Although I have found many posts all over the net (here included) that list folks with similar problems, and having tried many of the "fixes", I am still unsuccessful at getting the video card to work in any more than a minimal manner (no games, no 3D of any kind...etc.)
View 5 Replies
View Related
May 15, 2011
i am using Ubuntu 11.04 on my computer system. I urgently need a good video converter for converting videos.I have already installed FFmpeg and men-coder,Winff etc. The problem is each has its own drawback.For instance ffmpeg cannot convert a .avi to .3gp with audio working. My preferences are the converter should be user friendly, should support all popular video formats.
View 2 Replies
View Related
Aug 26, 2011
Is there any way to get libmp3lame to work with ffmpeg without me having to completely recompile ffmpeg? I have managed to get video capture working (huffyuv didn't work for some reason) and this is my command:ffmpeg -f alsa -ac 2 -i hw:0,0 -f x11grab -r 25 -s hd1080 -i :0.0 -vcodec libx264 -vpre lossless_ultrafast -threads 0 -vf 'scale=-1:720' -sameq out.avi
There are so many answers and questions all over the place I can't even tell which package is actually causing the problem... (libmp3lame0? ffmpeg? libavcodec*?)
View 9 Replies
View Related
