General :: Adding Fedora 13 To A Multi-boot Setup?
Jul 17, 2010
I am currently booting 4 flavors of Linux - Ubuntu 10.04, Xubuntu 10.04, Linux Mint 9 KDE RC and Linux Mint 9 Gnome. There is so little difference between Ubuntu Gnome with the right packages installed and Linux Mint 9 it is redundant and I would like to replace it with Fedora 13 and try that out for a while. I understand that Fedora still uses a legacy Grub while the others are all using Grub2. I also understand that the two bootloaders do not get along. Is there a way to do that? How? If I have Fedora install its legacy Grub to the Fedora partition will Grub2 see Fedora and update itself properly? I'm open to starting clean if that would simplify things.
View 4 Replies
ADVERTISEMENT
Jun 5, 2011
I have asked about this issue before to no avail but since then I have been able to narrow down the main cause of the crashes. My setup:
HD5770 - Running 2 19" LCD's
HD3300 onboard Running 1 47" lcd
Whenever I am in firefox and have pictures open in the browser and move the mouse to the other 19" monitor it crashes, not everytime but often enough to be annoying. Sometimes when it crashes the screen goes blank and I wind up at the login screen, other times it just goes blank and stays blank.
View 14 Replies
View Related
Jun 23, 2011
I'm looking to set up a server with attached mass storage device and tape autoloader to run linux. It's set up under Windows at the moment. Goal is to have users, connecting from individual workstations and laptops, backup their data to the linux server. On their personal machine, some users run linux, some MacOS, some Windows. I plan to set up the 5 500 GB drives as RAID5. I understand that if setting up as software raid the format is "physical volume for RAID". Under this setup, will Windows users be able to read/write and function as expected? I can't assume only linux user access.
View 3 Replies
View Related
Mar 18, 2010
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
How SHOULD I set up the boot loader?
View 4 Replies
View Related
Dec 20, 2010
Problem: I have installed two Ubuntu servers, 10.04 32-bit and 10.10 64-bit, in a multi-boot environment (also have FDOS and WinXPsp3). The 64-bit will not boot because grub can't find the UUID for the disk with the 64-bit system.
Brief Background: Installed 10.04 LTS two months ago with no problems. 10.04 is in a primary partition on hda with FDOS.
Installed 10.10 (64-bit) in a new primary partition on the same hd. The install seemed to go ok, but the MBR and the fs on the 10.04 were corrupted; could not boot. Restored drive, and rebuilt grub.
Installed 10.10 on separate hd (hdb). In grub step all OS's were recognized so I pointed the grub to hda. Grub failed to boot.
Rebuilt grub from 10.04 on hda. All systems recognized but 10.10 will not boot because it says it cannot locate the UUID specified.
Compared the grub.cfg for both systems, the UUID specified for hdb is the same. Also, when I mount the drive for 10.10 on the 10.04 system the drive UUID is consistent.
I know I must be missing some thing, but I know not what. Have searched and can't find any clues. All other OS's boot ok.
Hardware: AMD64 4GB, 2 internal IDE drives (hda and hdb), 1 internal SATA (hdc WinXP), various USB and Firewire Drives (no bootable systems).
View 6 Replies
View Related
Jan 20, 2010
I want to code some simple personal projects on the Unix-like partition while doing everything else on my XP partition. Can someone recommend the solution that takes up the smallest footprint in size and processing power that still delivers value? I want to learn how to code in a Unix environment.
I'm trying Cygwin but my first impression is its a bit clumsy. Would a dual boot with BeOS be better? And how would I do it? EDIT: I need to be able to run both OS'es at the same time. This is very important for me. my laptop is pretty crappy and that's why I ask for something that has a low CPU/RAM footprint.
View 3 Replies
View Related
Jan 16, 2010
I'm looking for a quick an dumbass noobies proof why of creating a multi boot dvd, the distro's that i want on the disc are;
mint 8 (custom 1gb iso created with remastersys as a live dist)
knoppix v6.2cd (690.99mb)
nimblex (custom 527.1mb build created on nimblex website)
parted magic (49.9mb)
puppy 4.3.1 (104.9mb)
i have done some googling and it's gone right over my head so if theres a dumbass noob based way please could someone share it or a gui based app similar to unetbootin-377
View 14 Replies
View Related
Mar 29, 2009
Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
View 4 Replies
View Related
May 17, 2010
So I'm new to modifying Grub, and I've recently setup my laptop to contain all of Windows 7, XP, and the Fedora 13 beta on a single drive.Grub is currently setup to boot to Fedora, and the Windows 7 boot loader, and from there I can boot to XP.I'd like to set it up however, to have XP boot "directly" (i.e. bypass the 7 bootloader and go straight for the XP loader).The current setup is:
Partition 1: 7 ntfs on sda1 (primary)
Partition 2: sda2 (extended containing sda5 XP ntfs)
Partition 3: sda3 ext4 containing /boot
[code]....
View 5 Replies
View Related
Nov 17, 2010
Currently I'm running 3 operating systems on my machine; Windows XP, Windows 7 and Fedora 14. I've installed them in the following order: XP -> Win7 -> Fedora14, with the idea that this would work fine regarding operating system selection at boot time.
But unfortunately, I just installed Fedora, and now I'm unable to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error: Code: Error 21: selected disk does not exist To provide as much info as possible, here is a boot info script log:
[Code]...
View 3 Replies
View Related
Nov 19, 2010
Currently I'm running 3 operating systems on my machine (in order of installation); Windows XP, Windows 7 and Fedora 14. Unfortunately, after I installed Fedora I'm no longer able to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error:
Code:
Error 21: Selected disk does not exist
To provide more info, here is a boot info script result:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for /grub/stage2 and /grub/grub.conf.
=> Windows is installed in the MBR of /dev/sdc .....
mdadm: No arrays found in config file or automatically
View 4 Replies
View Related
Apr 11, 2010
I have a laptop dual booting to Windows 7 and Opensuse 11.2. However, I'd like to switch to a different Linux distro (probably Ubuntu, that's what I'm used to)
Is there a way for me to do it without losing the Windows 7 setup/data?
View 1 Replies
View Related
Aug 20, 2010
There are lots of OSs and Linux dists to install on your netbook, and I want to make it as easy as possible to install, remove and switch between them.
Just installing a dist and then another one after it will replace the GRUB boot screen every time, and some dists might override previous GRUB menus entirely.
On a previous machine I created a GRUB partition which chain-loads GRUB for each dist, but now I can't remember how I did it.
The hard drive is currently empty, since I started playing around with repartitioning. What is the easiest way to install GRUB to a partition? Links are welcome, but please no generic "install GRUB" guides because the ones I've found haven't been relevant to my particular situation (empty hard drive, multi boot environment, no CD/floppy)..
View 2 Replies
View Related
Aug 2, 2011
I have Linux Mint and Windows 7 installed on my laptop, and recently tried tinkering with EasyBCD, to use the Windows multi-boot loader instead of grub. Well, that didn't work out too well, because I ended up with the Windows boot loader with two options, Windows 7 and Linux Mint, however the Linux Mint entry just redirected me to grub, which wasn't what I intended.
I tried to put things the way they were, with grub as the only boot loader, and figured I'd do so by setting EasyBCD to skip the multi boot screen and going straight to the Linux Mint entry, which corresponds to grub.Well, now when I boot, I get the grub screen, but if I select the Windows 7 entry, it just redirects me back to grub, so I can't access Windows 7 right now. What can I do to fix this? Can I edit the Windows boot loader from within Linux?
View 13 Replies
View Related
May 5, 2009
Having already borked my system once while deciding to nstall Fedora 10 under the influence of a false sense of bravado, alcohol induced, I thought I should ask for a little insight before trying things again. Once I get my system fixed and before consuming alcohol that is.Short version:I thought Id be smart and mount the /home partition I use for openSUSE as /home for Fedora, I mean that why I made /home it own partition right? Well, thatwhen the alcohol took over and I thought I be rilliant(not so much) and just use my SUSE username for Fedora too, since, you know,e already got all my files and settings stored there.
Thus my request for the answer on how to correctly use the same /home partition across multiple OS installations; with the preferred goal of retaining access to email folders, various files, games (WINE) and such no matter what distro I�m using. Would it really be as simple as just not using the same user name for more than one distro? What addtional issues does that solve/create
View 3 Replies
View Related
Jun 11, 2011
I have 4 OSes installed:
Windows XP on sda1
Backtrack on sda5-6
Ubuntu 11.04 on sda7-8
Ubuntu 10.10 on sda9-10
I want to remove Ubuntu 11.04 (partitions sda7-8). I tried using GParted from Ubuntu 10.10, but it says that I have to unmount logical partitions with a number higher than the one being removed.
View 2 Replies
View Related
Jan 25, 2010
Anyone know how to configure multi domain in openSUSE 11.2?
View 9 Replies
View Related
Oct 20, 2010
i have a laptop and i plunged an external monitor into it. I want to obtain a virtual desktop[ I will privede more debugging info below
video card
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
Driver:open source radeon driver distribution kubuntu 10.04
I tried this:
xrandr --output LVDS --mode 1280x800 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1280x0
it resulted this error 1
xrandr: screen cannot be larger than 1920x1920 (desired size 3200x1080)
Googling about this error i found a old post,it could be outfated that sugested editing xorg.conf. I created a xorg.conf using "Xorg -configure" and i modified the screen section to this:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
[Code].....
View 3 Replies
View Related
Jan 26, 2010
Just go myself a new computer and thinking of how set it up. I have win7 HP and will probably install at least some version of Ubuntu on it shortly to have dual boot. Might come other Linux distros too in the future. I have a 1TB HDD and my question is what's the smartest way to share files on all OS's? In what format?
I was thinking of ~100GB for Windows for apps and games etc. ~20-50GB for Ubuntu and some third partition, where I store my common files like media, pics, docs, downloads and stuff, taking the rest of the free space.
What filesystem should the shared partition be? Is there some smart way to get windows home directories and linux home directories to point to the same place on the shared partition or would it be recommended to just keep them separated?
View 5 Replies
View Related
Jun 11, 2011
I need some help to setup a simple 2 screens extended desktop. From my laptop with an nvidia card, it was very easy and done in seconds. But with my new desktop loaded with amd hardware, it's turning into a nightmare. I've posted on details of my hardware and of this problem here, and I'm encountering new trouble. Since then, my xorg.conf has changed a little without success:
[Code]...
View 1 Replies
View Related
Mar 14, 2011
I have successfully set up a multi-seat configuration using 2 nvidia cards with 2 instances of X running at the same time. Thing is now, I can't access my external hard drive or any usb thumb drives I plug in. Normally when they would just open up after I plug them it, I get an error saying "unable to mount, Not Authorized". How I can regain access to this? I am using Linux Mint 10
View 6 Replies
View Related
Jun 14, 2010
Here's my scenario:
I want it so any inbound traffic from dsl goes back out the dsl and same for rogers. I've been searching and playing with many docs with no luck.
Anyone know how I do this? The multiple routes are on the same device br0. (which I think is causing all my havoc)
View 1 Replies
View Related
May 18, 2011
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies
View Related
Jan 18, 2011
I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies
View Related
Dec 30, 2010
along with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries
1) You must have X server 1.8 or up (Maverick has 1.9).
[Code]...
View 9 Replies
View Related
Mar 29, 2010
Fedora hanging during boot when new drives are connected.
I'm running an FC12 install on a 750gig Samsung SATA drive. BIOS is set for drives to be AHCI
I've got 3 other identical 750's, two of which have never been used (as in never been written to). None of the drives have any jumpers set on them, as I've read that SATA handles that. At some point, all 4 drives were connected, and I had formatted one of the drives and backed some data up to it. But a reboot left me with FC hanging on load and the solution was to unplug all 3 other drives. I left it alone for a month.
Troubleshooting this weekend, I found with just my active drive and one of the untouched drives connected, FC still hangs. What I mean by hanging is that the blue background appears with the un-filled 'F' logo which filles diagnally under normal conditions. Mine will not begin to fill, and keyboard commands are not recognized.
It almost resembles a master/slave problem, but I thought that was gotten rid of with SATA. I tried setting the BIOS to use IDE-compatibility mode and set the order of the drives but the problem was the same, though I did not try any jumper arrangements.
View 5 Replies
View Related
Mar 14, 2011
How do I add a script to rc.local to run at bootup?? I've few .sh files, service files and .cgf files. The service files are fine but the .sh file didn't startup at the bootup. I've included the .sh and cfg file as below:
/path/to/directory/file.sh start
/path/to/directory file.cfg
View 14 Replies
View Related
Sep 28, 2009
I recently installed Fedora 11 onto my computer on top of Linux Mint. Originally I was using Mint's bootloader, but I'm ditching Mint soon for another OS so I'm migrating to Fedora's bootloader to make the transition easier. For a while I couldn't get Mint to appear on Fedora's Grub menu, but during that time I could still access the internet on Fedora. However, once I successfully added Mint to Fedora's grub menu, the wireless suddenly stopped working on Fedora (though it still works on Mint.) I can connect to the network on Fedora but it gives me the awesome "host does not exist" message when I try to ping anything. Any insight as to why this might have happened after I managed to successfully boot Mint from the Fedora boot menu?
View 5 Replies
View Related
Mar 25, 2010
I have Lenny, and Jaunty Jackaope installed on the same hdd. Jaunty Jackaope was installed 2nd so it has control of grub (I don't know if that is the correct expression) I want to remove Jaunty Jackalope however I know from past experience that after I do this I will no longer be able to boot into Lenny as I will get a grub error at startup. How to I give boot/grub to Lenny so that I can remove the other operating system?
View 3 Replies
View Related
Apr 15, 2011
I have 4 OS's on a publicly used pc. I want to hide the boot menu on GRUB2 and have it appear only when I press and hold the SHIFT key during boot. Will changing in /etc/default/grub GRUB_HIDDEN_TIMEOUT to 0 safely accomplish this goal? Also, what is the command for deleting all of the former kernel upgrades from the boot menu?
View 8 Replies
View Related
