Strange problem with Kopete in Fedora 12. It works well with Google talk but does not work with Openfire - based jabber servers. Empathy works well with it so I think it is not SSL/TLS problem. Libs like qca, qca2 etc. are installed...
I like Kopete interface much more then Empaty.
I have just updated to FC 13 (64 bit), and there seems to be a problem with Jabber in Kopete. I use this to connect to the google talk servers. In FC 12 this was not a problem. However, now I recieve a message "Cannot load the Jabber protocol plugin." when trying to add a Jabber account in kopete. This happens on two separate recently upgraded machines.
I suspect the kdenetwork package shipped with FC 13 is broken in this respect.
EDIT: Updating to the kde packages from the kde-testing repository fixes this, so it looks like the package is indeed broken.
I'm using 9.10 on a laptop as a server - it is not currently connected to a router/clients
I have installed a Jabber server and created a new account online but when I try to connect using Empathy I get a "Network Error" message
I'm presuming I have to point it at my server somehow but I'm completely lost as to how
Currently when the system boots, It boots jabberd2 before mysql. So jabber fails. Then, later mysql is loaded. I either want to force jabber to load mysql first, or make the system boot mysql first. I've tried changing /etc/init.d/jabberd2 to say "# Required-Start:
mysql $network $named $remote_fs"...
However, insserv says that mysql service has to be enabled... so I assume that's an issue because mysql is an upstart script.
I'm running a small ejabberd server on a LAN. Everything works fine out of the box except that when certain users disconnect they remain listed as online.
Specifically, Linux users who suspend their computers with their client still open are still listed as online. This is not the case for Windows or Mac clients.
I did some research and fount out that it has something to do with the TCP keepalive timeouts on the server. However I cannot figure out how to set those times.
Is there a webcam support for Kopete in Fedora 11?If I follow the steps here:URL....then the 1st and 2nd steps are fine but at the 3rd step, I don't have any "send webcam" (nor receive) option in the file menu. I did have it in F8.Has this been removed in F11?Tested over the MSN protocol with ports 6891-6892 open (tcp and udp).
View 1 Replies View Relatedi mean, using Fedora 14. i had windows 7 so i decided to move on!! LOL, i have Fedora 14 Gnome, and i want to install Kepete Messenger but it does not appear in Add/Remove Software in Fedora, and i cant find it in internet.
View 2 Replies View Relatedi have a fresh install of fedora 15 and i just configured kopete for gmail and facebook using jabber. Now, i dont see any place where i can start an audio call. i am logged into gmail and facebook already. chat is working . am i missing something?
View 2 Replies View RelatedI was excited to use empathy in 10.04; however, both in the Beta and the Full Release I experience the following. (Note: I'm using 64 bit.)Setup 'Wizard' adds GTalk and Facebook Chat just fine.Manually add a IRC account (can't do that from wizard).Manually add a SIP account.Enjoy that it's working, and think that the full release fixed the bug.Disconnect
Then the next day.Set status as available.Get an ambiguous 'network-error' for GTalk and Facebook.Disable all accounts.Restart empathy, enable GTalk, get same error.Delete all accounts, restart system, go through account 'wizard', add GTalk, same error.Upgrade to dev version of Empathy, notice it's no longer in the nice messaging applet, but GTalk connects.Disconnect/Reconnect - same error.
Anyone else having this problem? Seems something is breaking with Jabber on Empathy. But I can't find any related information. I'll post logs when I boot into the 10.04 installation (which I was hoping to switch to, but not so sure right now.)
I'm not able to connect to my work's internal xmpp server. I've confirmed with co-workers that my settings are correct. They are able to connect but I am not.
In the debug window, I get a large number of messages, though none of them show up unless I set the logging level to 'debug'. Specifically nothing shows up if I set the log level to "error."
The last message I get is
on_connection_ready: got error: WOCKY_AUTH_ERROR_STREAM (#: host-unknown:
I tried a Google search on "WOCKY_AUTH_ERROR_STREAM" and got zero results. That's right: ZERO! I suddenly feel like I'm using a Mac!
Again, my co-workers are able to connect (though I haven't spoken to any fellow ubuntu/empathy users as they are either on vacation or in the field with me and using their blackberry) but Spark (puke!) and IM+ work fine.
The next problem I faced is that the Jabber-client sends messages but the recipients do not receive them.The server is Openfire 3.7.0. And our users use it without any problems.One user has Kubuntu 10.10. Pidgin 1:2.7.3-1ubuntu3.2. The connection passes well. The contact list loads well. The incoming messages are received well.But the messages which are sent to others - do not reach them.His Jabber-client is configured as others'. I tried Pidgin 1:2.7.3-1ubuntu3.2 (which is used in our company) and Gajim 0.13.4-1ubuntu1 .What can it be? And what should I do?I compared the openssl version on my computer and on problem computer. I have 0.9.8o-1ubuntu4.4. He had just 4. I upgraded his system. Now he has also 4.4. But the problem is still with us.
View 4 Replies View RelatedI am trying to compile Zabbix on Centos 5.4 and while tying to compile it with mysql and some other parameters it gets failed because missing components.
Quote:
I couldn't find any jabber-devel or jabber pckg in repo.
Has anyone managed to successfully get .net (mono) to work on fedora 10?
View 6 Replies View RelatedMy phpMyAdmin is showing up only a blank screen with its favicon.What kind of error is this?
View 1 Replies View RelatedI've write a php code to upload files. by move_uploaded_file. I've given 777 to the folder. But file upload unsuccess, error log show no premission. I test the code in Centos it wotks. I change the dest folder in Fedora to /tmp it works, but it only work on /tmp. neither /tmp/abc nor /temp. I guess it's a setting problem on apache or php. I also copy http.conf and php.ini from Centos, but mod_file_cache and mod_mem_cache not find in Fedora.
View 2 Replies View RelatedI've been trying to find out which jabber/XMPP clients out there automatically sign messages with openpgp you send but documentation on that has been spotty. Could you tell me a. if you know any clients that can easily sign and encrypt all outgoing messages and b. should I worry if a client is only able to sign presence and not messages?
View 1 Replies View RelatedI want to run a web server.
I've done
When i do [url] i get a blank page.
Server: CentosClient: F11Remotely it doesn't work
Code:
tftp 10.0.0.2
tftp> status
[code]....
The situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
I recently installed Fedora 13 on VMware 7 environment without X window. sshd did work fine, but when I tried to put it into xinetd, it doesn't work any more. Here is what I have done so far :
I stopped sshd. #service sshd stop
and I configured xinetd.conf like below.
Quote:
#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.
[Code]....
I don't know what I did wrong with them. I configured xinetd.conf, and I made service configuration file 'ssh' in /etc/xinetd.d, and I restarted xinetd.
What am I supposed to do to make a life on my sshd within xinetd ?
I have two mount points that used to work. I have them defined as cifs shares in fstab, and they map to a Windows machine, which I am able to ping from my Fedora machine, but for some reason I get a mount error 2, and the destination is not accessible. The man page doesn't really give any troubleshooting steps. Since I am mounting by IP address (which as I said has worked before), nothing has changed, although the IP address did change, which I updated in the fstab file to the new IP address (and since I have reserved this new IP address so it can't change again!)
I ran a test and shared a folder from another one of my computers, and added a line in fstab to auto-mount that, and I get a "permission denied" error 13, which is different than the error 2 I get on the other 2 shares. What should I be looking for as far as actual connectivity between the machines? I have verified that the windows machine is on and I can access the same shares from another computer.
Update: Added the host and IP address to my hosts file, and replaced the IP address with the name, and still get the same error. Also, the share name has a space in it, so I replace that with a "�40" space character (which worked in the past). I tried replacing that with an actual space, and putting quotes around the URL, but then I get a "bad URL" error.
[Code]..
I am fairly new to Fedora or rather use it only for some school exercises I get. I have to setup a Samba server with some basic settings and it doesn't want to work. I first tried it on the Fedora VM I got from school (version 11). It somehow worked, but extremely bad ... the Windows client had to wait for over a minute to get either access or an errormessage, that the server was not found (but when entered the ip in the adressfield on top it worked (with a minute or more to wait)). I tried updating the VM - no improvement. So I decided to download Fedora 12, installed it and the Windows client gains instant access on first glance. But when I try to get access to a specific share, it only tells me, that I am not allowed to access it Oo.
Here is my config:
Code:
I even turned off iptables and Windows firewall.
The funny thing is: I tried exactly the same config on my homeserver (copy and paste), which runs Arch, and it works with no problem. But on Fedora I cant access it from nowhere. Not from WinXP, Win7 or any Linux. Simply won't work.
I dont have any gui on Fedora
A week ago or so neither ssh nor scp were working when attempting to connect to my on-campus computer from home. ssh was complainig about the key not matching and I figured out I could just delete the config file it was reading the (now old) key from and let it create a new one with the updated key upon prompting me whether or not to trust the remote host.
However, even though ssh is now working, I can no longer use scp. I issued scp -v and discovered a bunch of errors. scp prompts me for the remote password and even prints the message of the day on the remote computer but then just hangs and doesn't seem to be copying any files. I'm sure the issue is with the whole key change issue but I can't quite figure out why ssh would be working just fine and scp would be failing.
the codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 Replies View RelatedAm I right in thinking that the system-config-httpd tool doesn't work in Fedora 13?
View 1 Replies View RelatedDo I need to do anything special to my LAMP server for AJAX to work?
View 2 Replies View RelatedI use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
I'm using Kopete as my IM manager with the Skype plugin. I used the One Click Install tool to install Skype4py and than I enabled Skype in Kopete. Every time I try to enable Skype within Kopete I get an error box that says, "no Skype".
OS: 11.2 64bit
I'm using openSUSE 11.3 (x86_64), KDE 4.4.4 "release 3" and Kopete 4.4.4-1.4. When i try to connect to ICQ it says "bad password" don't connect and it writes to console "
vitus@linux-z3xp:~> kopete
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kopete(14348)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/vitus/.kde4/share/apps/kabc"
[Code].....
but it did not work. I have also tried to delete kopete configuration files and reinstall program, but it also didn't work
Ihave using kopete 0.80 in kde 4.3.1 on OpenSuse 11.2 i added my yahoo id & password to kopete yahoo account. but nothing happens? i am still offline and i can not see my contacts id
View 2 Replies View Related