Fedora Servers :: Mount Errors From Fstab - Used To Work?
Aug 19, 2011
I have two mount points that used to work. I have them defined as cifs shares in fstab, and they map to a Windows machine, which I am able to ping from my Fedora machine, but for some reason I get a mount error 2, and the destination is not accessible. The man page doesn't really give any troubleshooting steps. Since I am mounting by IP address (which as I said has worked before), nothing has changed, although the IP address did change, which I updated in the fstab file to the new IP address (and since I have reserved this new IP address so it can't change again!)
I ran a test and shared a folder from another one of my computers, and added a line in fstab to auto-mount that, and I get a "permission denied" error 13, which is different than the error 2 I get on the other 2 shares. What should I be looking for as far as actual connectivity between the machines? I have verified that the windows machine is on and I can access the same shares from another computer.
Update: Added the host and IP address to my hosts file, and replaced the IP address with the name, and still get the same error. Also, the share name has a space in it, so I replace that with a "�40" space character (which worked in the past). I tried replacing that with an actual space, and putting quotes around the URL, but then I get a "bad URL" error.
[Code]..
View 5 Replies
ADVERTISEMENT
Feb 6, 2010
I run a headless Ubuntu 8.04 server, which acts as a web, email and file server. I am sticking with 8.04 as it is a LTS release and will upgrade to the next LTS when it is released.
I have two external USB drives, that I need to mount at boot. I have been using /etc/fstab up until now, with the following entries:
Code:
However, as I gather from doing searches is quite common, occasionally I get an error during boot (causing the system to drop to a recovery shell) because the USB drives take time to wake up and the system hasn't found them by the time it reads /etc/fstab.
From doing searches, it seems there is nothing you can do to fstab to fix this, so you need to mount them using an rc.local script instead, using:
Code:
The problem is, as I have two USB drives, their /dev/sdxx location changes between boots. I thus want to use UUID codes as I do in fstab, however I haven't found anything about this.
Does anyone know how I can use the mount command and UUID to mount a drive in rc.local and what options I have to use the mount the drive with the same options that I am using in my fstab entry? Obvisouly, I can't refer back to fstab using the mount command, because then I will still get the boot error issue if they are listed in fstab. And there is no space internally for the USB drives as there is already two internal drives.
View 3 Replies
View Related
Feb 2, 2016
On my debian jessie "testing" I have set in fstab some line to mount folder located on my pc server...
When pc boot up the error is
Code:
Select allFailed to mount /mnt/Web
See 'systemctl status mnt-web.mount' for details...
CIFS VFS: cifs_mount failed w/return code = -101
Then, after logging in, if I run mount -a all works correctly...
Maybe error was LAN that is not started? In this case how to resolve?
View 11 Replies
View Related
Nov 27, 2010
I installed 10.10 yesterday and all seemed fine. Now I made an NFS mount in /etc/fstab like I use to in 10.04
Kaapstad:/admin /mnt/Kaapstadadmin nfs defaults 0 0
but get this:
# mount -a
mount: wrong fs type, bad option, bad superblock on Kaapstad:/admin,
missing codepage or helper program, or other error
(for several filesystems (e.g. nfs, cifs) you might
[Code]....
In /mnt, /etc/hosts everything is set as should be. In other posts I'm reading other problems with nfs as well. Is there a bug?
View 2 Replies
View Related
Jul 10, 2010
I'm running XBMC media center which is built on Ubuntu and I'm trying to mount a network share, but I can't seem to automate it. If I manually run:
Code:
mount -t cifs -o file_mode=0777,dir_mode=0777 //192.168.1.20/disk7/xbmc_thumbs/Thumbnails /home/kevin/.xbmc/userdata/Thumbnails
The mount is created and everything works fine. But obviously the mount eill be lost on the next boot. A few months back, when I was running a previous version of XBMC and first instructed on how to do this, I was told to put that command in /etc/init.d/rc.local so the mount would automatically be created at boot. I did and it worked. The other day I upgraded to a new XBMC build (which is built on the newer Lucid Ubuntu) and while the same command creates the mount, putting it in /etc/init.d/rc.local does not create it on boot. Someone suggested the fstab was the better place to create the mount. So I inserted the following in /etc/fstab:
Code:
//192.168.1.20/disk7/XBMC_thumbs/Thumbnails /home/kevin/.xbmc/userdata/Thumbnails cifs file_mode=0777,dir_mode=0777 0 0
That doesn't work either. What am I doing wrong and how can I get this mount auto-created on boot?
View 4 Replies
View Related
Jul 28, 2011
Code:
192.168.0.133:/openils /openils nfs4 rw,_netdev,auto 0 0
fails to mount the nfs4 share, however
[code]...
View 6 Replies
View Related
Jan 16, 2011
I have the following two lines at the bottom of my /etc/fstab
Quote:
//172.16.6.15/e /tmp/e cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
//172.16.6.15/e/Public /var/www/index/pub cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
My server address is 172.16.6.1.
If the destination (which is my workstation desktop) 172.16.6.15 is offline when the server tries to boot, the entire boot procedure halts with the following message: Unable to find suitable address. mountall: mount <destination> terminated with status 2 The problem is that my server runs headlessly, and every time something silly like this happens where you'd normally expect the OS to continue regardless, I'm forced to plug a monitor in and diagnose on console
So my question: Is there any way to make it proceed with the boot normally despite the host being unreachable? I could probably chuck a mount command into crontab or /etc/rc.local or a /etc/network/if-up.d script, but isn't this the way it really should be done (/etc/fstab)? If so, then we shouldn't expect the entire boot to halt just because a network share can't be mounted, right? While on the topic of a headless ubuntu server 10.10 not booting without some kind of intervention, I have yet another issue: If the server goes down without proper shutdown (power failure, for example) the grub menu displays the kernel choices and there's no countdown timer. Instead, I have to manually press enter to continue the boot. Is there any way around this? Clearly this should not be the case for a server distribution
View 3 Replies
View Related
Oct 28, 2009
I can access the files I need by using the telnet command, but I need to have access to the files in my local file system. Is it possible to mount a shared drive over telnet in the fstab file?
View 8 Replies
View Related
Feb 6, 2010
I used the usual 'mkfs.xfs -l size=128m,lazy-count=1 /dev/sdX' at creation. After that, I would like to use custom mount options like: This goes instead of the "defaults" part in /etc/fstab
noatime,nobarrier,logbsize=256k,logbufs=8,biosize=16
I receive the following error at boot: INVALID log iosize 4 [not 12-30] << No one used iosize 4... what does it mean? it is connected to the options..but which one? (At the minute I'm usig it with: noatime,nobarrier).
View 1 Replies
View Related
Jul 18, 2011
I have been trying to work out how to set up Fedora 15 to automatically mount an NFS share at boot time. I can mount the share interactively using 'mount -t nfs server:/usr/local /usr/local'. When I put the entry in /etc/fstab, it stops the machine booting. It tries to give me a shell ('Enter root password for shell or press Control-D to exit') or something close to that. However, I cannot enter the maintenance mode, it hangs. Same thing with pressing control-D, it hangs and doesn't get any further.
I rescued the system by booting off a CD, mounting root, and removing the nfs entry from fstab. After that it booted fine. The entry I had in the fstab is: nfsserver:usr/local /usr/localnfsro,hard,bg,intr,comment=systemd.automount0 0
I put the 'comment=systemd.automount' entry in because of some related searches I did in forums.
View 14 Replies
View Related
Sep 4, 2009
Our office just switched from CentOs to Fedora and I'm trying to get everything set up. Everything is working so farbut im having a problem with my mounted cifs drives. They mount ok, I made directories in /mnt where the drives are readable and accessible. I'm only missing the shortcuts to the mounted drives in nautilus and on the desktop. I've checked the gconf editor and the volumes should be visible.Is there an extra option i have to add in the fstab line to get the shortcuts or something like that?
View 2 Replies
View Related
Nov 25, 2010
I am trying to mount a directory from my server onto my wireless laptop. The directory mounts successfully if I am already logged into the laptop with another account first but if I log on initially with the user who requires the mount the mount fails. I suspect the mount is taking place before my network connection is up, is it possible therefore, to delay the mount in fstab until the network is fully connected?
View 3 Replies
View Related
Jan 13, 2010
Gateway m275 laptop with builtin smartcard reader. I've done modeprobe - <mmc module of all types> after having removed modprobe.conf file. I see that there is a pcmcia rules, Do I add all modules to this list so hat it can be probed. Once pccardctl is working, how do I find the volume and mountit or set fstab to create the mount point or to have it automatically mounted in media.
View 1 Replies
View Related
Feb 10, 2010
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
View 14 Replies
View Related
Mar 29, 2009
I have two NTFS volumes I want to automount at boot. I can't get my user account to mount them in Fedora 10. I keep getting the message that the two lines I have edited in fstab are bad. The volumes are sda2 and sda8, and the volume names are SPACELAB and Spaceman. I also need to be able to mount an NTFS usb drive from time to time. I am getting frustrated, so I have posted my fstab file below,
#
# /etc/fstab
# Created by anaconda on Sun Mar 1 12:44:11 2009
#
[code]....
View 13 Replies
View Related
May 15, 2010
With a 1Tb USB drive plugged in, we'll call it "TheDrive", I boot my machine and "TheDrive" is mounted automatically. The icon is on the desk-top. "TheDrive" mounts to /media/TheDrive. Everything is fine. But, I would like to automatically mount the drive in my file tree at the location /mnt/TheDrive. I would not like to have the drive automatically mounted to /media/ and appear on the desktop. I know that this requires the use of fstab; but, I do not know what to add to this file.
[Code]...
View 14 Replies
View Related
Jul 28, 2010
I have a second hard drive with fedora 10 installed on it. My primary drive and os is fedora 12. How do I edit the fstab file in order to mount the second hard drive and get files off of it
View 8 Replies
View Related
Jan 21, 2011
I tried so many times to configure vlc on fedora 11 . But all are failed things that tried are listed below:
Yum install vlc error-> no package found
Downloaded rpm for vlc and try to install but dependency errors
Downloaded mplyer and try to compile but ended with errors, compile with various combinations of parameters but errors are still there.
View 1 Replies
View Related
May 22, 2010
I'm really tired of having to umount under root, then mount again as a user for my external hard disk. When I'm in firefox, I like to save pages alot onto my external but I constantly have to remount because my user has no write permissions for the drive. What can I do for my device in fstab so that it mounts automatically under my user and not root?
View 9 Replies
View Related
Sep 3, 2010
I have a router that supports NAS; that is, you can plug a USB drive directly into the router, and it becomes a Windows share. I can manually mount the NAS share and use it properly. But, I would like to have it automatically mount on startup. The main reason for this is to assign it a proper mount point so that I can access it from the command line, since I'm having trouble doing that after I mount it manually.
To mount it manually, I go to Places > Connect to Server, select the "Windows Share" service type, and enter "//192.168.1.1/USB_Storage" as the server name. The server name is supposed to be "//readyshare/USB_Storage," but that does not work, so I used the IP address.
I would like to mount this drive at /mnt/readyshare. So, I followed (I thought) the instruction in this document. I created the directory /mnt/readyshare I assigned myself a samba password with smbpsswd I created a group "readyshare" with the GID 1010 I created a .smbcredentials file in my home directory I modified my /etc/fstab file.The .smbcredentials file reads:
Code:
username=<my username>
password=<the password I created with smbpsswd
The line I added to my /etc/fstab is:
Code:
//192.168.1.1/USB_Storage /mnt/readyshare smbfs iocharset=utf8,credentials=/home/<my username>/.smbcredentials,dir_mode=0775,gid=1010 0 0
But, no dice. The share does not mount.What am I doing wrong?
View 9 Replies
View Related
Sep 25, 2009
On my Suse 11.1 computer, I'm only able to run 'mount' as root, but this screws up the permissions somehow, in that my external drives are now read only when I am normal user. I can plug my external drives to my mac osx laptop via usb or firewire, and I can read,write, and execute. As su, I can mount the drives using usb on my suse computer, but only as read only.
Optimally, I want to edit the fstab file to auto mount these external drives, and then have samba run to make the drives available (i.e. rw) on laptop.
NOTE:
1. I created the file systems on a laptop (mac osx) which has different user name than my suse 11.1 computer.
2. I tried to use chown to manually force user:group to be Mike:users instead of root:root, but the external drives still are 'read only.' Trying different options in column 4 fstab file kept giving same trouble, but I can now get user:group = 99: 99 (not sure what that means).
View 9 Replies
View Related
Sep 8, 2009
Can I mount ftp server in fstab? I have a ftp server and I want to mount it in fstab to /mnt/myftp. Is that possible?
View 8 Replies
View Related
Mar 13, 2011
/dev/sda1: UUID="1ABC9F967605D379" TYPE="ntfs"
View 2 Replies
View Related
Jun 29, 2010
Using: Debian Lenny. I want to mount 2 NTFS partitions in my /etc/fstab file, so that I needn't manually mount them when I want to use them. One of the partitions is the primary partition on the same hard disk as my Debian /, /home, and /swap partitions. The other is a 2nd internal hard disk.
a) Should I use ntfs-3g instead of ntfs as the /etc/fstab filesystem? I want to be able to read and write to the partitions as a user and not just as root.
b) I have read on the forum that "mounting NTFS partitions through fstab is not a great idea" - I thought that any dangers of doing so were ancient history. Why would it not be a good idea?
c) Which options should I use?
d) If I use 'user' instead of 'users' so that one specific user (me) can use the partitions, how do I specify which user name? (The man page is annoyingly unclear about this).
View 5 Replies
View Related
Jul 19, 2011
I am writing this software that creates virtual block device nodes almost like loop does. I need to allow non-superusers to mount and umount filesystems from these devices. I don't know the names of the block device nodes beforehand so i can't use fstab entries to add "user" or "owner" flags there.
Currently i solve this by providing a small suid helper tool that verifies that this is indeed "my" block device the user is trying to mount and then just call /sbin/mount or /sbin/umount to do the job. This is definitely better than setting a suid bit for the whole program but not really perfect.
View 1 Replies
View Related
May 5, 2010
I have a problem with one of my partitions, that used to be automounted trough fstab, before my upgrade to Lucid.
The partitions is used for storing all things related to virtualization. It's purpose is not relevant to the error, I think.
The affected part of the fstab file looks as follows:
Code:
# backuppartition on sdb
UUID=b623c9a2-8d4a-4399-be07-b8b1c74d23fd /backup ext4 defaults 1 3
# Virtualization Partition
[Code].....
P.S. I tried editing the fstab for the virtual parition, to
UUID=a56a9445-d375-45b4-abb5-d3512da0a3e6 /home/***/virtual ext4 defaults,auto 1 3
View 3 Replies
View Related
Aug 18, 2010
Installed ubuntu 10.4 on a formatted hard drive IDE. desktop has two other drives , one SATA drive and one SCSI drive. SCSI drive has windows.
Both windows and ubuntu load fine through GRUB2 etc
I had installed WUBI before on the SATA drive and then i uninstalled it.
problem is that when i log in to Ubuntu i see on fdisk
But i cannot access the SATA drive /dev/sda i tried mounting the drive but i get an error saying this is mounted as /dev/sdb5
How do i mount the SATA drive to get access to the drive ? i messed around with this drive when i was using WUBI. i.e. tried to mount it to recover grub but never got it working. Now somehow it seems that this old mounted drive is messing with my current Ubuntu install.
How to recover my fstab is shown below:
Changed the connect sequence in BIOS and mounted the volume using sudo mount /dev/sdb1 /media/sdb1
View 1 Replies
View Related
Nov 3, 2010
After having solved my raid5 creation problems, I'm running into a new one: the RAID is just impossible to mount through fstab. I get a wonderful "The disk drive for /dev/md0 is not ready yet or not present.
Continue to wait or press S to skip mounting or M for mount recovery."
Once the system has booted, I can perfectly run a mount /dev/md0 /media/raid and mount it manually.
I've already tried mdadm.conf with UUIDs, with device names, tried several options in fstab, xfs and ext4 filesystems, nothing to do, it won't mount.
All this is running under Ubuntu 10.04 server, kernel: 2.6.32-25 server, mdadm 3.1.4 (from a Debian sid)
Here's my mdadm.conf:
Code:
The entry in my fstab:
Code:
And just for info, my /proc/mdstat:
Code:
View 8 Replies
View Related
Feb 11, 2010
I've just started playing around with a Sheevaplug running a very light version of Ubuntu. I'm planning to run it with an SD card to store all my server data and a USB stick to regularly back up some of it.My problem is that the 2 partitions on my SD card mount fine at boot, but my USB stick's single partition does not. Could it be that the mounts specified in fstab are done before my USB device has finished getting alive? Mounting the USB stick manually works perfectly well.
fstab
Code:
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/sda1 /media/usb1 ext2 defaults 0 0
/dev/mmcblk0p1 /media/sd1 ext2 defaults 0 0
/dev/mmcblk0p2 /media/sd2 ext2 defaults 0 0
dmesg after boot
Code:
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver.....
In the dmesg
Code:
usb-storage: device scan complete
comes after
Code:
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
which makes me think the USB stick has missed the fstab train the 2 SD card partitions are on. And changing the order of the entries in fstab does not make any difference either.
I'm not planning to reboot my Sheevaplug every 5 minutes, but I like things to be nice and clean.
View 1 Replies
View Related
Dec 19, 2009
I can't remember if things with mounting vista/ntfs partitions has changed, but I cannot seem to get my partition mounted as a read-write partition.
I tried this in fstab:
And it made it read-only..
So i tried this:
And it wouldn't mount it.
Quote:
Failed to mount '/dev/sda1': Operation not supported Mount is denied because NTFS is marked to be in use. Choose one action:
Choice 1: If you have Windows then disconnect the external devices by clicking on the 'Safely Remove Hardware' icon in the Windows taskbar then shutdown Windows cleanly.
Choice 2: If you don't have Windows then you can use the 'force' option for your own responsibility. For example type on the command line:
Or add the option to the relevant row in the /etc/fstab file:/dev/sda1 /media/vista ntfs-3g force 0 0
View 4 Replies
View Related
