Fedora Servers :: Can't Use Tftp \ Remotely It Doesn't Work?
Jul 29, 2009Server: CentosClient: F11Remotely it doesn't work
Code:
tftp 10.0.0.2
tftp> status
[code]....
ADVERTISEMENT
Software :: Running Rc Scripts Remotely Doesn't Work
Jul 30, 2010RHEL 5 update 2 I'm trying to start services from a centralized location on many servers. I can start/stop these services from an interactive login without any issue, but when I try the same command via ssh/rsh, it hangs. I have my ssh keys set up correctly and I can run other remote commands.
Local server:
# /etc/init.d/samba start
Starting Samba smbd: [ OK ]
Remotely to same server:
# ssh server "/etc/init.d/samba start"
Starting Samba smbd:
<hang>
Fedora Servers :: Unable To Setup Tftp Server?
May 10, 2010You are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.
Code:
tftp your_pc_ip_address
Fedora Servers :: TFTP Case Insensitive To File Name Requested
Jun 19, 2010I am downloading some files via tftp from the server (call it my server) and I need the server to be case insensitive to the file names requested. That is If I request "SoMe.TTL" and the actual file name is "some.ttl" it should send "some.ttl" back! Right now it is case sensitive and is a pain in the but because some windows clients upload files to that directory and the names can have any case. Furthermore, the file request mechanism must allow the user to input the required file name, hence the user can write using any case. Can the tftp-server solve cases by it's own? How about dnsmasq's internal tftp server? Ok, maybe I wasn't explicit above:
I need to make the fedora tftpd-server Case Insensitive!
Fedora Servers :: Sshd Within Xinetd Doesn't Work
Aug 21, 2010I recently installed Fedora 13 on VMware 7 environment without X window. sshd did work fine, but when I tried to put it into xinetd, it doesn't work any more. Here is what I have done so far :
I stopped sshd. #service sshd stop
and I configured xinetd.conf like below.
Quote:
#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.
[Code]....
I don't know what I did wrong with them. I configured xinetd.conf, and I made service configuration file 'ssh' in /etc/xinetd.d, and I restarted xinetd.
What am I supposed to do to make a life on my sshd within xinetd ?
Fedora Servers :: DYNDNS Changed Public Key - Now Scp Doesn't Work
Apr 9, 2010A week ago or so neither ssh nor scp were working when attempting to connect to my on-campus computer from home. ssh was complainig about the key not matching and I figured out I could just delete the config file it was reading the (now old) key from and let it create a new one with the updated key upon prompting me whether or not to trust the remote host.
However, even though ssh is now working, I can no longer use scp. I issued scp -v and discovered a bunch of errors. scp prompts me for the remote password and even prints the message of the day on the remote computer but then just hangs and doesn't seem to be copying any files. I'm sure the issue is with the whole key change issue but I can't quite figure out why ssh would be working just fine and scp would be failing.
Fedora Servers :: Welcome Page When Codeigniter Works But It Doesn't Work
Oct 27, 2010the codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?
View 4 Replies View RelatedServer :: In.tftp Pxelinux.0_ Fails With TFTP Open Timeout
Mar 15, 2010When I try to pxe boot a Sun X4100 (which actually has a RHEL OS on it right now) I get the message TFTP open timeout. All traffic is allowed for port 69 udp in both directions. I do get a dhcp address. I see that both on the server and the client it gets an IP. After that I get this message in the logs:
[Code]....
Fedora Servers :: Can't Login Remotely To Client Machines?
Jun 14, 2009I am running NFS and NIS servers in my FC8. Clients are also running FC8. Everything was working fine. I could login remotely to server as well as clients. Suddenly (few days ago) a problem started. I can not login remotely to client machines. I did not do anything. I can login to server remotely, but not the client. When I try to login, it accept password and nothing happens. Also, when I try to login from server to client same thing happens. We share the home directory of the server with client. Another question: there two type of nfs server nfs-user-server and nfs-kernel-server. I just use gui to set up the NFS. I don't know which one I am running. Is there any way to find out which nfs I am running?
View 1 Replies View RelatedFedora Servers :: Remotely Managed With Plesk And/or Cpanel Or Only Via SSH?
Aug 22, 2011Can a Fedora server be remotely managed with Plesk and/or Cpanel or only via SSH?
View 1 Replies View RelatedFedora :: Way To Remotely Access Work Station Running Windows XP
Oct 5, 2010I run Fedora 13 on my HP dv6000 Pavillion. I am looking for a way to remotely access my work station running Windows XP from my Fedora machine. Most of the information I found explained how to access a Linux box from a Windows environment, and the one place I found that showed the other way around was incomprehensible.
Our company servers run Windows XP, and we have successfully installed remote desktops on other laptops running Windows.I thought of running the remote desktop from a Virtual Machine Windows session, but it seems a cumbersome way to do it.
Networking :: Can't Get Tftp To Work On Debian
Apr 28, 2011I have created a /tftpboot directory and chmod it to 777. I have put an image 'uImage' on my Debian box under /tftpboot
In directory /etc/xinetd.d/ I have created file tftp:
Service tftp
{
disable = no
socket_type = dgram
protocol = udp
wait = yes
[Code].....
Fedora Servers :: Apache - Can't Acces Http Remotely But Https Works
Jan 17, 2010I have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.
What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost
The same exact steps have been done for port 443
I can access both server locally but only the https server remotelly.
Here are my iptables :
Code:
you can try to acces my servers using [url]
I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?
Finally found my error seams like turning off UseCanonicalName to off did the trick
I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.
Ubuntu Servers :: How To Setup A TFTP Server
Nov 12, 2010I am trying to setup a TFTP server and followed these instructions in setting up TFTP-HPA.
[URL]
I pretty much followed every step but commented out these two lines from the /etc/xinet.d/tftp.
# only_from = 172.31.0.240/28
# interface = 172.31.0.252
Do we really need the lines if I am allowing any machine to connect? And I have only 1 network card. This is acting as a dedicated TFTP server.I ask as I get an error on the get and put commands as below:
tftp> get xxx.txt
tftp: error received from server <File not found>
tftp: aborting
However although it gives an error it DOES GET the file.The put command however does NOT put the file. I have nobody / nogroup setup for the directory permissions as well.
tftp> put .vimrc
tftp: error received from server <File not found>
tftp: aborting
Ubuntu Servers :: Ltsp Fails In Tftp Under U9.10 / Sort It?
Feb 17, 2010In Jaunty (9.04) I've setup a small (eleven-terminal) ltsp network at the local school. It handled around 6600 working hours with ease.
Now I've upgrade the server to Karmic Koala (9.10) and it just stopped working.
1) The clients have PXE NICs
2) They get the proper IPs from the DHCP server and respond appropriately to changes in the DHCP configuration files.
3) DHCP server also points the clients to
filename=/ltsp/i386/pxelinux.0
4) When the clients try to download the pxelinux.0 over tftp they just timeout
5) /etc/inetd.conf has an entry like
tftp dgram udp wait root /usr/sbin/in.tftpd /usr/sbin/in.tftpd -s /var/lib/tftpboot
6) The file /var/lib/tftpboot/ltsp/i386/pxelinux.0 exists on the server
I'm lost at all these configuration files and protocols.
Ubuntu Servers :: How To Do A Tftp Remapping So WinPE 3.0 Will Boot
Mar 26, 2010I have checked several tutorial sites, to no avail. I can't seem to get Winpe 3.0 to boot over tftpd/pxe.Has anyone successful done this using Ubuntu 9.10?, or am I just wasting my time trying.
View 4 Replies View RelatedUbuntu Servers :: Dnsmasq Does Not Serve Up Remote Tftp Ip?
Oct 25, 2010I have it working fine when tftp and dhcp are installed on the same server but when trying to forward to a remote tftp it does not work. Dnsmasq insist on giving its local ip.I have added to config:dhcp-boot=pxelinux.0,pxetest2,192.168.0.130and I tried with and without the original hcp-boot=/var/lib/tftpboot/pxelinux.0Not much on this topic on the google nor on the dnsmasq homepage.
View 1 Replies View RelatedServer :: Configure/Setup DHCP, TFTP Servers?
Feb 23, 2010I've tried to configure DRBL server to use Clonezilla and that is required me to setup DHCP, TFTP servers.But I've gotten a lot of errors from them - so please look at my attachments from /var/log/messages and dhcpd.conf - help me to find out what are wrong with them.
[Code]...
Ubuntu Servers :: Installing LTSP When Using A Separate DHCP And TFTP?
Mar 17, 2010I want to install Ubuntu LTSP on top of an already existing system. However, I want to use a different DHCP and TFTP server. Do I simply just install 'ltsp-server-standalone' with apt and run 'sudo ltsp-build-client', stop the DHCP and TFTP server and stop them from starting automatically? Would I then just copy over the pxelinux.cfg/default file from /var/lib/tftpboot along with the initrd.img and vmlinuz images to the TFTP server?
Edit: Do I need to actually copy the whole /var/lib/tftpboot/ltsp directory over to the TFTP server?
Ubuntu Servers :: Ssh Doesn't Work From Internet
May 2, 2010I can't connect to my ssh-server (on ubuntu 10.04) from any external address. The error in putty is "connection timed out". From my internal network, everything works fine, even if I select my external IP address and port in putty as the destination.
This is what I have done so far:
installed open ssh with the ubuntu server 10.04 cd
set up port forwarding (11041) in my router (seems to work ok, port is open according to "shields up")
configured ssh to use port 11041 in /etc/ssh/sshd_config
changed tcp and udp ssh port in /etc/services to 11041
enabled UFW and did sudo ufw allow ssh
[Code].....
Ubuntu Servers :: Website Doesn't Work With Www
Nov 27, 2010I have added a domain to my new vps account but i notice that the website doesn't work with www so how can i redirect www.example.com to example.com. (bind9, apache2, webmin, ubuntu server 10.04 lts)
View 9 Replies View RelatedUbuntu Servers :: VirtualHost, Doesn't Work When Use Www
May 19, 2011Ive made a site on my Ubuntu server and link the folder where it is with VirtualHost. The problem is, when i place mypage.com works, when try www.mypage.com goes to the apache "It Works" page.
View 4 Replies View RelatedUbuntu Networking :: Setup TFTP Server To Work On Secondary Network Card?
Dec 14, 2010a machine with 2+ network cards, need to setup TFTP server on one card and use internet on another.
the tftpd server works on default routing network adaptor with following configuration.
How set the TFTP server on the secondary network adaptor?
TFTP server tftpd by xinetd configuration in: /etc/xinetd.d/tftp
{
protocol = udp
port = 69
socket_type = dgram
[Code]....
Could not find how to change the post <prefix> I remembered clearly I did before.
Ubuntu Servers :: Setup A Tftp Server To Mount A New Kernel In A DaVinci Platform?
Mar 16, 2011I am fairly new to ubuntu server, I want to setup a tftp server to mount a new kernel in a DaVinci platform. I was following the guide in this page [URL]..docs/linux_tftp, but accidentally I remove the xinetd.conf file. So I think that maybe removing and reinstalling xinetd the problem will be solved, but instead of that I can't completely remove xinetd and the follow message is print in the terminal
Removing xinetd ...
invoke-rc.d: unknown initscript, /etc/init.d/xinetd not found.
dpkg: error processing xinetd (--remove):
subprocess installed pre-removal script returned error exit status 100
invoke-rc.d: unknown initscript, /etc/init.d/xinetd not found.
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 100
Errors were encountered while processing:
xinetd
E: Sub-process /usr/bin/dpkg returned an error code (1)
with that problem I can't start the service or stop it, I am blocked in the configuration of tftp server.
Ubuntu Servers :: Tomcat Manager Doesn't Work?
Jul 31, 2010I'm really new with Ubuntu and have the following problem:I installed successfully sun-java6-jdk using apt-get install sun-java6-jdk Then set up the JAVA_HOME environment variable to "/usr/lib/jvm/java-6-sun-1.6.0.20"
And then installed successfully tomcat6 using apt-get install tomcat6 apt-get install tomcat6-admin tomcat6-examples tomcat6-docs Everything seem to be right, when I try the browser with http://localhost:8080 return a webpage with "It works !" and other text
But, if I try http://localhost:8080/manager/html then returns 404 error, the error is something like "The required resource (manager/html) is not available" (that is my translation from the spanish text "El recurso requerido (/manager/html) no est disponible")
[Code]..
Ubuntu Servers :: Vsftpd Doesn't Work Anymore
Nov 27, 2010I recently installed vsftpd on my system and it was running fine for my system users. Now I wanted to add virtual users so I googled it, I found this tutorial: [URL]
I did what they've been saying over there but when I restarted the vsftpd I couldn't login with the virtual user and also not with the system user anymore. This is the error ( with the system user who could login before ):
Code:
Status:Verbinden met 109.230.234.21:21...
Status:Verbinding aangemaakt, welkomstbericht afwachten...
Antwoord:220 (vsFTPd 2.2.2)
[Code]...
Ubuntu Servers :: Apache2 Alias Doesn't Work
Nov 29, 2010I'm trying to set up 2 aliases with PHP files in it. But in both cases I get a 403 Forbidden error. This is what the /etc/apache2/conf.d/alias file looks like:
[Code]....
Ubuntu Servers :: Vnc Doesn't Work Unless Monitor Is Connected
Feb 17, 2011Last night I was able to set up my server so that I can just connect vnc. I even was able to be connected at the log on screen so I could select which user I wanted to log in at. For some reason today, I have to have the monitor plugged in all the until the logon screen comes up before vnc will connect. Once the logon screen is up, I then can connect via vnc & select which user I want to logon as. It's odd because it worked last nigh, but today - Nope nada, it doesn't work & I can't explain why. I did clean up - Removing some applications I don't need on my server. (I'm hoping that isn't the problem) It's odd as well because I don't have to be logged on as a user to connect via vnc, I just have to wait until the logon screen is available...Then I can unplugged the monitor & logon.
View 1 Replies View RelatedUbuntu Servers :: PHP Error Reporting Doesn't Work?
Apr 5, 2011I am developing/testing a PHP app on my netbook. For some reason apache/php are returning nothing but a "500 internal server error" response when there is a problem with my php script. For example, if there is a semicolon or closing brace missing, it should cause the script to die with a hint about which line caused the script to stop working. Instead it displays nothing but a "500 internal server error" message.
View 5 Replies View RelatedUbuntu Servers :: VSFTPD With NIS Environment Doesn't Work?
Apr 11, 2011I installed Ubuntu 10.04 64bit server on DELL R710 server recently.
The basic:
[System Model] --- PowerEdge R710
[Ubuntu] ---
root@pek-mcbuild2:~# cat /proc/version
Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010
root@pek-mcbuild2:~# uname -ar
[Code]...