OpenSUSE Install :: System Freezing With Kernel 2.6.31.8-0.1-desktop
Jan 28, 2010
After migrating from openSUSE-11.1 to openSUSE-11.2 together with a few further online updates including a kernel upgrade to 2.6.31.8-0.1-desktop, my system started freezing a couple of times for two days.
I made up my mind googling for "linux freeze", found a hint saying, that 2.6.31.8 causes trouble, fell back to 2.6.31.5-0.1-desktop, and voila: the problem is gone. What a relief!
Trying to install Opensuse 11.2 (64bit) on a new machine isn't working well. After loading the linux kernel, the green screen with the progress bar appears, and the mouse and keyboard turn off (at least, the leds go out and there's no response) The progress bar never moves. Esc key doesn't work either. I've tried safe mode install and other options, but the same result follows.
It's going onto a Tyan S2912 with AMD 2347HE. The hard drive is a Western Digital SATA drive I bought today. There's 4GB of RAM, and the DVD drive is a Toshiba USB unit. I don't know what else to say about it. If it helps, I've been running Pelican HPC (live) without a hard-drive andgot tired of setting the network configuration and installing a ouple of programs with every boot. (Which is why I bought the hard drive today). I want to install Opensuse 11.2, but I've tried Debian (no luck on detecting the hard-drive) and Windows 7 (installed fine, but there are no drivers for the embedded video).
We have just installed the 11.3 version of opensuse in a Dell Poweredge T610 with 8 Gb in RAM and two (2) Xeon Quadcore proccesors. Well, the first time the Opensuse resets the computer, after the installation (it was fine, w/o any problem) the system goes frezze showing a screen which reports a BUG ERROR in the Kernel code, specifically:
Kernel bug at /usr/package/BUILD/kernel-desktop-2.6.34/kernel/timer.c:643 invalid opcode: 0000 [#1] PREEMPT SMP last sysfs file: /sys/module/thermal_sys/sections/__ksymtab_strings CPU 11 ... ...
After a "button off" reset the machine boots fine and we could finish the configuration of the applications that we needed. We tested the machine by two days and it didn't show again the problem mentioned, and we believe it was a little bug in the installation, but today, the server halts again in the boot process 3 (three) times before it runs again well.We have repeated this installation in other computers, one in a 32 bit version and other in 64 bits version (like the Dell) and only in the last one has repeated the problem, I mean, no problems in the 32 bit installation. Fortunately, this new server is just a replacement for an old machine, that is running with the 10.3 version. Perhaps, does we continue using the 10.3 instead of the 11.3 meanwhile it is deputed?
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
I have Opensuse 11.3 with kernel 2.6.34.4-0.1-default i686 and use KDE4-4.5.1 from the new OpenSuse repo. My system sometimes freezes while using Firefox or Chrome and also sometimes playing with Kpatience or browsing images with Gwenview.
My video card is an old Sapphire Radeon working with radeon module and desktop effects are off. The only way to bring up the system is hard resetting. I tried also the desktop kernel with no difference.
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
I understand that the new 11.2 version has a new kernel optimized for desktop use. Can someone tell me or show me where I can find the new kernel configuration options? I would like to see what options they choose to change.
When I installed the suse11.3, I running the "uname -r",the system shows "2.6.34-12-desktop",for some reasons,i need the kernel header for "2.6.34-12-desktop". I down the "kernel-source", "kernel-default" and "kernel-desktop" and I check the "/usr/src/" path, but only have these stuff "linux-2.6.34.7-0.7 linux-2.6.34.7-0.7-obj linux-obj", where can I get the kernel -header for "2.6.34-12-desktop".
Never thought much about it until now a but is it possible to get the desktop kernel at install with 11.3 DVD ? I always get default-kernel and have to do the kernel dance to get the desktop-kernel I prefer. I'm familiar with the multiversion = kernel-desktop and methods to retain different versions. Just wondering.
Finally got around to updating from 2.6.31.8 and was surprised at the slew of warnings issued during the install. Rather than post them here, see: pastebin - Someone - post number 1792805 I would have bet money that the machine wouldn't boot after this, but it in fact did (whew). Since the kmp modules were not updated with this new kernel, I have merely suspicions....any one have the real reason for these warnings? Same type of warnings occured (thou I didn't copy the output) when I installed the ATI prop driver rpm. everything seems to work as normal so far, but it was so very different than many previous updates that I'm a bit leery.
my friend updated kernel today and it "stopped working" and I was asked to fix it he is new to linux, and I don't have physical access to that notebook from what I know main problems are:
1. no network devices exist (except for loopback) 2. sound card driver is missing (nVidia MCP79) 3. in grub menu after choosing new kernel uname -r sais the old one's version
wifi card is atheros, but I don't know specific model.
A few upgrades ago, I had also a desktop-kernel installed. I tried starting with the standard and the desktop kernel, but could not see a difference. Why this desktop-kernel and what's the difference with the standard kernel? HP laptop with Intel(R) Core(TM)2 CPU T5600 - OpenSUSE 11.3 -KDE4.4.4
On a fresh install 11.3 gnome I am getting an update freeze on the kernel-desktop-2.6.34.7-0.5.1. This is on the initial software update after first log in on fresh system. It downloads the package and freezes during the update and causes all my other updates to reload. I went to init 3 and ran zypper update and saw that it made it to 91% and then stopped. After that I usually get a corrupted install.
I just updated to new 2.6.38-18 kernel and headers. Now the latest Ati 11.2 driver wont install completely and I cannot get any X. So I removed the ati drivers to use the opensuse drivers but kde wont start now (dont know what the issue is.. maybe someone can poitn me out the the correct log file to look for errors).. I am using gnome now. Anyone knows how to get ground this and install ati drivers.
Several times in the last few days the desktop has frozen. I don't know if it's KDE issue or another conflict.All programs seem to continue running smoothly, but none of the menus on windows will work, or anything in the task manager, or desktop itself. I've tried killing the task manager but it doesn't affect the issue. If I knew what process was causing this, I might be able to restart it.
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
GNOME system monitor is constantly freezing and not responding when i click on first tab 'System' Do somebody knows some workarounds for this issue? It's the same on freshly installed system and also on updated GNOME 2.28 from stable repository.Sometimes on second or third atempt it is working, but i cannot accept such an level of unstability and bugs, discovered on daily basis of testing openSUSE 11.2. There are much more very basic issues in this release which are normal for beta stage, but not for almost 3 moths old system...
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
I have Intel DG31PR motherboard. But Yast - Hardware information lists it as D945GTP. How this can be corrected? My system is freezing often so trying to narrow down the problem.
Can anyone point me to a source for linux-kernel-headers. for kernel 2.6.34-12 I can't find it in the normal repositories and need it for installing vmware 6.0.4
I installed Fedora 13 on a separate partition and it deleted all of my openSUSE entries in grub. Or the boot menu, whichever is correct. From another thread, I found these commands and tried it:
Code:
grub root (hd0,3) setup (hd0) quit reboot
hd0,3 contained one of my openSUSE installs. Everything went well and grub accepted all of these commands except quit. So I used esc and rebooted. The reboot brought up the grub shell again. I could find no way to boot anything. Then I used the 'repair installation' option from the 11.2 dvd and installed a new boot loader for /dev/sda2 which contains 11.2.
This was successful, so I went to the YaST bootloader tool and added /dev/sda3 (Milestone 5) and /dev/sda4 (Fedora) and rebooted. But these two partitions still boot into grub instead of loading the correct kernel.
I have updated to the new kernel that was available from 11.2 and now I cant use my system.
It boots up into kde 4.3.5 and then right when its just finishing it freezes everytime and I hear that last tone of the bootup sound ring continually until I force a shutdown. Anyone else have this issue with the update?
I have a fresh install of Maverick on a Toshiba r700 laptop PT310A-05N011. I am experiencing constant freezing. The computer will without warning completely freeze. Can not move the mouse or even drop to a tty shell. After about 5 seconds the fan will spin up to full speed. I then have to do a hard shutdown. Every time this has happened i have been connected up to a wireless network with firefox open while actively surfing the net. This issue did not happen before I installed the wireless driver (Broadcomm proprietary, downloaded through ubuntu Additional Drivers).
I'm not sure how relevant that is though as 90% of what i do on this laptop is surfing and i installed the driver a few hours after install. This freezing does not happen in windows 7 and I have left it running prime95 overnight once in both 7 and ubuntu without error. Does anyone know what this may be, how i might resolve it or steps I can take to diagnose it, logs i can check?
I upgraded OpenSUSE 11.2 to 11.3 today using Zyyper on my laptop. Everything went fine with no errors whatsoever. At the end, a message was displayed at the terminal asking me if I want to see the notifications. I pressed "Y" and the system hanged there and then. I had to do a hard reboot. After reboot the system booted fine but hanged at the desktop with no response from the keyboard, mouse, touchpad, etc. The situation's same after many reboots. System boots fine but hangs at the desktop. Screen resolution changed to 800x600.Only power button works! I use it to log off and then do a reboot.
I have a dual boot laptop with OpenSUSE and Ubuntu. The boot loader used is Ubuntus Grub that came with the Ubuntu installation.
I have done a zypper dup and upgraded to OpenSUSE 11.4. When I reboot my system I can no longer boot into OpenSUSE, Grub says something about a missing kernel.
I think I understand whats wrong here; the OpenSUSE entry in Grubs table hasn't been updated with the changes brought in by the zypper dup (new kernel i guess).
I'm I correct to assume this? How do I fix the problem? Booting into Ubuntu I tried to find /boot/grub/menu.lst to examine it by I cannot find it. I know Ubuntu use a newer version of Grub, does it have a different file layout?
I installed FC11 from installation cds twice and I'm having a problem with Firefox freezing the system. The mouse cursor will move but nothing else is responsive, including mouse buttons and keyboard.I checked the media on every disc and they all check fine.I never had this problem with FC10. I tried upgrading Firefox -- with the necessary dependency upgrades too but without success.I tried to downgrade to FC10 Firefox and ran into a great big hassle with that.
