Ubuntu :: Stop Desktop Freezing When Asked For Password For Admin Tasks?
Jul 6, 2010
I often want to have mythtv running on one display while I continue with work on the main display, as I CAN chew gum and walk at the same time. When the task is administrative, such as running update manager, I am asked for my password so Ubuntu (10.04 amd64) can authenticate me as an administrator. Good, but I think I would like it not to freeze the desktop, including the mythtv, while it does so. Is there a good reason not to want that? If not, can it be done (avoid freeze when authenticating) and if so, how?
I thought these were the same password?In-fact, they WERE the same password on the set-up I currently have.But now, weirdly, I can log in fine but I the exact same password is not using in order to perform admin tasks.I've tried a recovery mode, console, and then "password (username)" in order to reset the password.This does reset the password I need to use to log in, but the password still does not work for performing admin tasks
A few weeks ago, I installed Ubuntu 9.10 on a Dell Insprion 8600 as a dual boot to try out Ubuntu. I let the setup configure partitions for me. During the install, I was asked once for a password. Last week, Win XP would not boot up; that's OK as I was planning a re-partition and reinstall of both win and Ubuntu.
I wanted to get files off the NTFS partitions (I have one for win, one for the swap file and two more fore files etc.), so I wanted to mount the NTFS partitions. I was asked for a password for the administrator. My regular password, the only one I have set up, would not work. I tried rebooted two more times and still no luck with my only password.
However, I was able to boot up from the set-up disk and mount the NTFS partitions without a password. I was able to move all the files I needed to one partition that I plan to keep (I will reinstall win xp then back up those files on the separate partition).
A question and a comment...
1. How do I install Ubuntu so that I make sure I have the passwords to do administrative level things (like mounting a drive)? 2. Being able to do administrative work off the Ubuntu test-drive disk while being denied access after signing in seems like a security issue (unless I screwed up somewhere).
When I installed Ubuntu (Lucid) on my new computer, As well as the login password I was asked for a keyring password. I gave one, but I am not sure exactly why I need this password. It seems that it was required to let me access the wifi - even though this has its own security code. I found I could stop the system asking for it every time I tried to connect to the internet using wifi by checking a button in the network setup, but when I registered for Ubuntu One, I was again asked for it - twice, once when I registered and again when I set up Tomboy notes sync. Now I get asked for it again every time I switch on.
I would like to know why the keyring passwords are needed in addition to the login password for a single user computer, which mine is and also how I can stop it asking for this password when I switch the computer on. One suggestion I have seen is to make the keyring password the same as my login password. If that is the case, then how do I change the keyring password?
is there a way to edit which commands require a sudo? or some programs, like the CPU frequency monitor on panel, requires a password to change. where would i start if i want to change this?
Slackware64, 13.1, Xfce: Sreensaver is configured to Lock Screen After 5 minutes. This works fine. My problem is that 90% of the time, when I go to wake the screensaver, it won't ask for a password and won't come out of screensaver. The only reliable method I have for getting the password prompt is to switch to a console and then switch back to the X session. Then, the screen saver doesn't display, it just asks for a password.
If I move the mouse when the screensaver is active, the screensaver animation freezes for ~20s and then resumes. If I touch a key (Esc, Shift, space, Enter), the animation freezes for ~30s and then resumes. I never see the Enter Password dialog. Screensaver is configured for Random. I haven't reliably gotten it to work often enough to offer any info as to when it works, but it has worked a couple of times. Keyboard and mouse are configured properly (HAL reports "Logitech Logitech USB Keyboard" for my Logitech Elite keyboard and X uses xkbrules evdev; the mouse is an MX Laser, identified as "Macintosh mouse button emulation").
Slackware64, 13.1, Xfce: Sreensaver is configured to Lock Screen After 5 minutes. This works fine. My problem is that 90% of the time, when I go to wake the screensaver, it won't ask for a password and won't come out of screensaver. The only reliable method I have for getting the password prompt is to switch to a console and then switch back to the X session. Then, the screen saver doesn't display, it just asks for a password. If I move the mouse when the screensaver is active, the screensaver animation freezes for ~20s and then resumes. If I touch a key (Esc, Shift, space, Enter), the animation freezes for ~30s and then resumes. I never see the Enter Password dialog. Screensaver is configured for Random. I haven't reliably gotten it to work often enough to offer any info as to when it works, but it has worked a couple of times.
Keyboard and mouse are configured properly (HAL reports "Logitech Logitech USB Keyboard" for my Logitech Elite keyboard and X uses xkbrules evdev; the mouse is an MX Laser, identified as "Macintosh mouse button emulation").
There where some updates for 10.04.1 yesterday, after I installed them, a few hours later I restarted my machine as new headers and kernel files where downloaded.So this morning, when I come in, I wanted to check my software sources as I saw something a little odd yesterday.When I try to start that program; I am asked for my administrator password. Not the password I use for administrative tasks; which is what I am generally asked for.Anyone else seeing this? And if so, what happened. The admin account I have setup is My account, I am the only person on the machine. In the past I have entered my password and carried on; not this morning. Not sure what is happening; but I have not setup an actual admin account / password.
Downloaded Wubi on Win 7- 64 bit. ran it,a nd it asked for password. I gave it my Ubuntu account password a d it did not work. I also gave it my PC's password, it still does not work...
I have quite a few things running, and walk away from the laptop. When I return and wake up the computer, I have a period of between 10-15 seconds before a password prompt is shown. I would expect the password prompt to come up before I am able to type and do any system commands.
i use that box as a 'cruncher' it runs the BOINC client with the WCG project as a full time 'cruncher'so that kinda sucks right nowso i think the install workedbut when it restarted it asked for my user name and password (in terminal mode i think)that leads me no-whereso before i did this upgrade i swapped out my GPUsi pulled out my 8800GT and put i back in my main rigand put a 4550 in its placeit started an ran in safe modecould i just simple be over looking the face that 10.10 cant use the 4550 and all i have to do issudo appget the drivers for it to get up and running again?
I ran zypper in vm-install the other day and build them dependencies with zypper si vm-install.After that tried running 'Create Virtual Machines', asked me for root password, then goes blank.What else am I missing here?Box: openSUSE 11.2 | GNOME 2.28.2 | Acer RS740DVF | AMD64 X2 5600+ | Radeon HD4670 | 3GB RAM
I am working on a Dell Inspiron 9400 with 9.10 installed and (thus far) working quite well. However, when I type in a command into Terminal (I was trying to install Amarok), the terminal asks for my password and the entire keyboard stops working. As in, I can hit any numerical or letter key, and nothing happens in the terminal but the blinking cursor. The specific command was "sudo apt-get install amarok", and then it asks for my password, and I'm not able to make an entry.
I've tried changing to a couple of the different Dell laptop keyboards in System>Preferences, but again, before typing the command into the terminal, everything is working fine (inside AND outside of the terminal). After the password prompt comes up and the keyboard stops working in terminal, all the character keys still work fine still outside of the terminal.
Been having trouble connecting to the internet and i am no longer being asked for password/keyring prompt at start-up. Something the prompt comes up 5-15 minutes after start-up.
I even manually set 'password at login' but it doesn't even ask me for that?
ps: over here
HTML Code: https://wiki.ubuntu.com/LucidLynx/ReleaseNotes
i found something about Avahi potentially causing a conflict with network configuration - so i typed the following command and am now online at least:
sudo stop avahi-daemon sudo sed -e '/^start/,+1s/^/#/' /etc/init/avahi-daemon.conf
I have an intranet server behind a NAT router. Very standard linksys router home setup. The server has a static IP. I used port forwarding in the router to use SSH and log into the server remotely - it works OK.
I want no one outside my home network to access any webpages on the server unless they're authenticated.. I know I could port forward like with ssh but with http port 80 and then see webpages , but again this would open it up to anyone with my cable modem's IP - wouldn't it?
I need a secure way like SSH that requires a password before anyone could access port 80 and http from the server from a remote network.
How do I do this? And on the local network people can get served pages normally as usual. Just remote would need authentication. Must be commonly done(?)
Until this morning, my Wireless had always been working fine. This morning I rebooted after an Ubuntu update and now:
- I am asked twice for "enter password for keyring 'default' to unlock" whereas before I was always just asked once.
- The connection seems to be established, with the icon showing good reception and the tooltip reads "Wireless network connection 'mywifi' active: mywifi (100%)
BUT I can not connect to any website or ping the machines of my network, even by IP address. All of the other computers around (Mac, Windows) can use the Wireless as usual. My Wireless is WPA-PSK TKIP hidden SSID. My Ubuntu is 10.10 Maverick.
The title says it all. Is there a way to just click ok to administrative tasks instead of having to enter my password every time? Sort of like Windows 7's UAC.I'm using ubuntu 10.04 LTS. I don't want to log in as root
I just installed ubuntu 9.10 alternate version, but the problem is it is freezing after sometime. mouse stops working, not keyboard activity nothing else.
Desktop running a clean install of Karmic with ext4, /home on a separate ext3 partition. If I attempt to use Nautilus to copy a file over 1GB (that seems to be the tipping point) from Desktop to another partition or an external HDD, or if I download anything at the same time as I'm copying any file, the system freezes completely (no mouse, keyboard lights flash and keypresses don't register), and the only thing I can do is hit the reset button. I don't know enough to figure out exactly what's causing it, but I think it's ext4; this very same hardware ran Jaunty with ext3 like a champ, but when I installed Karmic, I formatted that partition to ext4, and that's when the freezing started. In the event that I don't know what I'm talking about and it's actually video drivers, I am using the Nvidia driver (185) on a GeForce 6200 because I use TwinView and don't know how to do a spanned desktop without it. I had used Nvidia drivers in Intrepid and Jaunty, though, with no problems. I have no Compiz effects enabled at all.
I'm perfectly willing to go back to ext3 (I think I remember how to make the list to "auto-install" applications, and /home is separate anyway), but if it is ext4 causing the problem, I'm still likely to run into it because one of my external HDDs is formatted ext4, and I don't really have anywhere to stick nearly 1TB of photos and video to reformat it ext3. Ultimately, if that's what it takes to fix the freezing, I'll do it, but I'd rather not. I like Ubuntu...I've used it since Warty, but this is wearing me out. I will carefully follow instructions and do nearly anything; I just want the freezing to stop.
Ok so i have a IOn based PC that i use for only xbmc. I previously had a full ubuntu 9.11 install.
I had to reformat the drive but i could not get audio working. I gave the ION Optimized live CD a go and it worked with HDMI audio running perfectly. The thing is when i close xbmc i don't have a desktop, it just goes to command line.
I need to install lirc, copy some keymap files into my xbmc folder and then setup wireless. What would be the best way? Can it all be done through command line? Can i install a desktop environment?
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
I recently decided to try and change my admin password on my usual default account (the one you have to type in, in order to do sudo e.t.c im guessing)a the user account option...and having entered my previous password correctly,t will not allow me to enter a new password, it just seems to hang, (i.e the working icon appears, but having waited a minute or twwo nothing seems to of happened..(cannot press the confirm button). Is there a way to reset the password so that i can set a new one, if i cannot change my own admin password, and i was working on a windows system, i would be screaming system compromise right now, but as its ubuntu, im sure theres a perfectly innocent explantion
I am using Ubuntu 9.10 (along with Win xp). I have to authenticate everytime I mount filesystem (My d: , e: drives in windows). Or to connect to the internet (I use mobile broadband) I have to authenticate, also if I have to install something from synaptics I have to authenticate. I know this is good for security but I am the only person using my computer , so is there any way out of this authentication business.
I've tried several installs via Windows with the latest RC of Ubuntu/Kubuntu/Xubuntu/Netbook et al, and I've encountered the same problem all over: every time an admin password is required, for example to install updates or new applications, I enter it, but then, the authentication window freezes, even though I've clicked on Confirm or pressed Enter to validate the password.
I have a friend who just recently got an old computer from a college. The college had been shut down for maybe 6 months and decided to sell all their equipment computer ETC. In that amount of time the college had forgotten the administrator passwords for all the computers. Therefore the computer can not be updated or upgraded to the latest version of Ubuntu.Is there anyway possible to get the administrator password so that I may update upgrade and install new necessary components for the computer?
I am running Ubuntu 10.04 on an AMD64 computer with an ATI Raedon x1250 graphics card.
Everything runs fine for about 3 hours, then it will randomly stop working.
Symptoms: Mouse stops moving for 10 seconds. Screen goes white. Speakers start repeating last 10 seconds of whatever was playing. Screen goes orange or purple with lines across it and random symbols...
At that point I hardware restart my computer and all is fine again
I need to host a user directory and home directors on a Ubuntu 10.04 box. I've installed openLDAP and I can connect a mac to it. how to install the mac schema or add users etc to it. I can view the directory in Workgroup Manager on Mac OS X Server but I also dont know how to set the admin username or password.
When I go to "Software Sources..." in the Software Center, the screen dims bringing my attention to the password prompt. I find this quite aesthetically pleasing and am immediately aware that I cannot continue until I enter my password. This is the only time that the screen dims in this fashion when asking for my admin password. Is this correct? If not (or maybe even if it is), should this be considered one for the papercut ninjas?
