When using yum update, can a program have been wrongly updated (or marked updated without finishing the update)? I ask this question because I'm new to Linux and my connection stopped during a yum update and the console text was strange when I did CTRL + C. (Did it 2 times (starting the yum update and because of no more answers and pressed CTRL + C)).
View 4 RepliesI have openssh running it was working last week then an update was done and now ssh does not work. removed the updates and the problem still exists.
Its CentOS 5.5 with all the latest updates for 64 bit!
Issue if as follows:
Connect locally to the loop back ip or remote ip the connection is disconnect right after the correct password is entered.
Here are copies of the log, sshd config.
sshd config:
i did an update yesterday and after me-tv doesn't work any more, now when i run me-tv i get this error message,Duplicate object id 'hbox1' on line 1220 (previously on line 535)To c if the tunner was working i installed kaffeine and it works fine, so its something related to the me-tv, any ideas how to fix it
View 1 Replies View RelatedI'm using fedora 13, and it's been a while that yum auto-update doesn't pop up.Some time ago, when updates were available, a notification popped up asking for update (and I love this feature because I didn't have to check manually).Under System>Preferences>Software Update i've Daily check for updates and weekly check for major updates, with no automatic installs.And doing System>Administration>Software updates, it load and updates correctly, just it's no longer automatically checked.
View 8 Replies View RelatedAfter using fedora 11 for a month or two now the ethernet gave out on me tonight. However if I switch to my ubuntu or windows XP install it runs fine. I made no recent changes to network connections, and no installed programs that should effect it.
kernel version: 2.6.29.6-213.fc11
default connection: eth0(and only connection)
ifcfg-eth0:
# Networking Interface
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:1F:C6:DB:05:0C
ONBOOT=yes
TYPE=Ethernet
IPV6INIT=no
USERCTL=no
NM_CONTROLLED=yes
NAME=eth0
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
DNS1=192.168.1.254
PEERDNS=yes
PEERROUTES=yes
I have tried, restarting, older kernel, restarting services, and clearing the DNS Cache. The specific error I get is that "Firefox can't find the server", and most other applications return similar. I can however ping websites still. All other computers on the network are running fine, and booting into another system the internet will work. Just not for fedora.
I know very little about SE Linux and I've heard that in some situations it's better to disable it. For a home user, is it important? Does it improve your life ? or does it get in the way ?
Last week some update stopped my printing and I had to install the new hplip from HP because it wasn't in the Fedora repos to correct the problem. I don't know if SELinux had anything to do with it, but today when I disabled SELinux a few minutes later I get a star up on the toolbar and when I clicked on it it mentioned something about hplip. It wouldn't make any sense to me but maybe this has happened to others.
have a gateway nv78 laptop. I just ran the latest update on Fedora 12, and after Fedora stopped seeing wireless networks all together.
View 8 Replies View RelatedMy update to kernel version 2.6.33.5-124 last night killed my Dell wireless, which uses broadcom-wl 5.60.48.36-1. What happened and how do I fix it?
View 14 Replies View RelatedThis morning I did an update on a current F13 system with NVIDIA Graphics card. System gets to a complete white bar across the screen followed by "FEDORA 13" . This all starts blinking and goes no further.
View 7 Replies View RelatedAfter a fresh installation my internet connection was working. but after yum update I am not able to connect to the internet. it is showing no internet connection.
View 3 Replies View RelatedI plan to install F12 (Fedora-12-i386DVD.iso) in a location where there's no Internet connection, thus I'd like to previously download the updates in order to install them once completed the installation. How can i perform this ? can I download the updates that were released after F12 launch date from somewhere ? how should I tell yum or rpm to find them ?
View 3 Replies View RelatedI have Fedora 10, and today I finally had an opportunity to let the automatic software updates run. At the end it said to restart the pc. I restarted and now it won't connect to the network. What do I do to get it connected again?
View 5 Replies View RelatedI'm trying to use Speedtouch USB modem.
According to [url].
After a bit of fighting interface works I can ping any domain name or ip address. I can even connect to web server via telnet, for example telnet www.org 80. I can see the response from Web server, but Mozilla says that it is offline, System Update says that no connection.
What can be the problem if manually I can connect but any Gnome GUI program says you are offline?
I have Debian installed a year ago, working perfectly until last week when network card connected to internet stopped to communicate. I did no change in configuration. It just stopped to work while I was reading an online web page. Network card connected to local network still works fine.
I thought it might be a NIC failure so I installed a new PCI NIC but no change, still no communication throught this NIC.
I verified/changed cable between NIC and the router, no luck. If I connect the same cable from router to a Windows PC, everything is OK. If I connect back to Debian machine, it does not work.
I tried connect this NIC with a different router with DHCP enabled, nothing, NIC will not communicate with DHCP server.
I tried to set static IP, no change.
Today I booted a Knoppix 6.2 and this NIC worked perfetly! It set up using DHCP, I could access the internet.
I booted machine as usual and the problem still persists of course.
This is information captured immediately after boot. The trouble NIC is eth0 after boot finishes.
All this was captured with eth0 connect to a router with DHCP enabled. There is no DHCP entry in syslog related to eth0. Reinstall is the very last option.
I managed to set up a PPTP VPN connection in Ubuntu 10.04, and it worked first time.This was about 3 months ago. It was working yesterday (Oct 05 2010), but when I came to log in to the VPN today it doesn't work. I tried the same VPN connection on my wife's laptop which runs Vista and it works. I have tried re-entering the details, even deleting and setting up from scratch via network manager. And yes I have the correct VPN plugins. what I should do. Is there a log file so I can have a look at it to see what the problem is. If there is where is it located. The computer is able to connect to the internet without any problems, just can't connect to the VPN. The only thing I can think of is that the update manager popped up this morning so a few things have got updated today. maybe something in there broke the VPN connection.
View 4 Replies View RelatedAbout a week ago I upgraded to Maverick from Lucid.
All networking worked fine on Lucid.
I am using an Acer Laptop with the Atheros AR928X Wireless Network Adapter.
I can connect to my home network (visible, with WPA2-Personal) fine. However, I cannot connect to my university's wireless network. The only difference I noticed is that its network is using WPA2 Entreprise with Tunneled TLS Authentication and MSCHAPv2.
I tried dmesg and I got:
wlan0: authenticate with 00:1a:1e:ef:f4:e1 (try 1)
wlan0: authenticated
wlan0: associate with 00:1a:1e:ef:f4:e1 (try 1)
wlan0: RX AssocResp frin 00:1a:1e:ef:f4:e1 (capab=0x431 status=0 aid=2)
[Code].....
Unless the driver has changed, I suspect this is not a driver issue, since it worked fine on Lucid. Is this a NetworkManager issue?
I'm running 10.10 on a brand new computer, and up until this afternoon the wired connection was working fine. All of a sudden it stopped working (and doesn't work in Windows either).I ran sudo dhclient and it gave me:
DHCPDISCOVER on eht- to 255.255.255.255 port 67 interval 3 (7, 9, 10, 18, 13)
No DHCPOFFERS RECEIVED
No working leases in persistent database sleeping
[code]...
I am from India, and I tried to update my Ubuntu system today. Code: $sudo apt-get update The update failed because the connection to the India mirror timed out: Code: [URL] Could not connect to in.archive.ubuntu.com:80 (111.91.91.37). - connect (110: Connection timed out) I tried the update a few times, with the same result every time.
I had firestarter running at this time, and noticed that I would get new security events every time I tried an update. I checked the events list, and it turned out that the machine at the ip address 111.91.91.37 (the in.archive.ubuntu.com machine, to go by the above error message) had been trying to make connections to seemingly random ports on the machine every time I tried the update: see the attached screenshot. I then changed my repositories to the Main Server using Synaptic, and tried the update again (from the command-line). This time it worked without a hitch, and firestarter did not report any unwanted incoming connection. why is the India mirror trying to open connections that the Main server apparently does not need in order for me to do the update? Should I (we) be concerned?
My ubuntu karma desktop is plugged into a wired connection that goes through a router and into my cable modem.Everything was working fine like it had been foseveral months yesterday morningSomething happened by the end of the day that has screwed up my wired networking. I plugged my laptop into the same cable thats plugged into my ubuntu, and the cat5 cable is live. Also when I plug said cable into the ubuntu box, the ethernet lights come on, or atleast a solid green one. Meanwhile the network connections Icon continues to have a red X and a tooltip saying "No network connection".
Under network settings, there is only one wired network "Auto eth0", but it says "last used: never" which is strange since I've been using this for months. When I click edit the main settings are MTU automatic, ipv4 automatic DHCP, and ipv6 ignore.hat could the problem be? By chance did a karma update get released that broke the networking
I installed Ubuntu 10.4 side by side with my Vista. This is on a PC I leave on permanently and use as a sort of Sever, so Security and Network connection are VERY important on this device. I use it for documents and IP PBX (telephone system). I currently use Vista and 3CX, but I plan to roll it over to Unbuntu full time once its up and runnng correctly - I will just need to change the Grub2 conf priority. After install, all was fine and I managed to make many changes to settings, apps and updates, but I have noticed in the past week when going in to make further changes the network has suddenly stopped working! According to Network Manager and the icon on the panel it is connected and I can not see anything obvious that is not correct. I tried doing a PING (192.168.1.1) from Network Manager to the main router, but it failed. I know that there is nothing wrong with the network nor the card or PC it all sits on. It's working now with Vista and my other machines. It must be a config some-where.
View 9 Replies View RelatedIs it just me or your update applet also stopped working recently? I'm running Factory KDE-4.4.2 and openSUSE-11.2. It's always "Checking for updates..." without finding any, even though I can always see new ones through Yast - Online Update. And sometimes it asks me to accept some key, when I click OK it asks me for a root password but after I type in half of the password it simply disappears and starts "Checking for updates..." again without end.
And YAST doesn't show any newer packages anymore but rather has "Switch system packages" on the top. If I click on that, then it starts showing newer packages and wants to update them all. But what if I want to use Packman's packages for multimedia and Factory KDE for KDE? If I select "Switch system packages" for KDE then it will update, for example, Kaffeine to KDE's but I want to keep it Packman's. If I search for Kaffeine, it shows no newer packages, but if I go to Versions, there's clearly a newer version there!
Just got the latest Updates which included Firefox 3.5.7I open FF on this machine and all I get is the attached imageWhen I try to expand it, all I get is a blank screen...I have updated 6 other machines without this issueI recall this happening one time before but I cannot recall the fix
View 5 Replies View RelatedToday i made an update using Webmin, and after that php stopped working, instead of running the files it launches a download. So i checked what was going on, and php module was disabled in apache config. When trying to enable it, it said the file "/usr/lib/apache2/modules/libphp5.so" did not exist, and indeed it disapeared. I tried to reinstal php and apache (with and without --purge, through apt) and it didn't solved the problem.
Also i tried copying the file from another machine, also without success (this time it shows " Apache is running a threaded MPM, but your PHP Module is not compiled to be threadsafe. You need to recompile PHP.") Dont know what to do now, im kinda desperated here because this machine hosts my website =P
Basically what seems to have happened is after the recent Ubuntu update my Windows partition became unbootable (or maybe just removed from Grub). This wasn't a problem for a while though as I still had access to my files through Ubuntu.After a couple of weeks of using Ubuntu I needed to get into Windows, trying to (blindly) fix the problem I think what I did was open up Disk Manager in Ubuntu, clicked the Vista partition and marked it as bootable. Having done this some sort of error occured (can't remember what exactly) and after a reboot the partition is no longer accessible via Ubuntu.
I've read through a fair amount of similar posts and tried anumber of solutions but haven't had any luck so I thought someone here might be able to shed a bit more light on to my situation?Realistically, my main concern is getting data off the drive, if I can do that I can wipe the entire thing clean
Touchpad has stopped working after some update. How to re-enable it? I don't haveusb mouse. No PS2 port. pci=noacpi dop. apt-get install xserver-xorg-input-synaptics
View 3 Replies View RelatedOn 10.10 my wireless card worked out of the box. Now on 11.04 it stopped working after the update!. My card is Atheros AR5001.
View 6 Replies View RelatedI kind of feel like I'm out there hanging by myself when trying to understand Ubuntu. If there is a tutorial or guide for beginners, please feel free to post the link to it!I recently updated Ubuntu 11.04 on my dads computer and after the restart I noticed his keyboard no longer works. Well, it's has the light on like normally, but it's like the computer doesn't recognize it.
View 1 Replies View RelatedI have ubuntu 9.10 and my wireless connection has been working perfectly until a few weeks ago when I updated my laptop. I can connect to the internet using my wired cable but not by wireless. There is nothing listed under my wireless list. I am new to this and have been unsuccessful in getting my wireless connection going again. I don't even know were to begin. I have a 2wire modem also.
View 2 Replies View RelatedI had clicked on the upgrade notification in Update Manager. After 3 hours of downloading, it stopped abruptly. Now when I try, I get a message saying could not download, check internet connection. I am able to visit other sites, and am actually downloading the CD itself without any problem.
View 2 Replies View RelatedI have been using my laptop as a development machine for a few months now, developing php/mysql applications, and testing them offline via the same laptop by pointing the browser to url.
But a few days ago, my url stopped working and I discovered that it will now only work if I have an active internet connection plugged in. Why has this happened and how to I fix my test server so localhost works with or without an internet connection via an ethernet cable.