I just upgrade my desktop to F12 and using it for few weeks now..Everything seems working fine except X server crash on me often.
Anybody out there have the same problem?
Need a work around solution for this.
Attattched a copy of Xorg.3.log.old for reference.
My system is as follow:
Intel P4 2.26Ghz
Kernel 2.6.32.10-90.fc12.i686.PAE
memory 1G
i did a fresh installation of Fedora 15 x64 with Gnome3.
Whenever i start LibreOffice the X server or gdm crashes and i get to the login screen of gdm.
Does Libreoffce have a log file? There are so many Xorg/gdm log files, i don't find anything...
uring its installation I faced the same problem as now: because my default sound card is gone and I am using an external one, during the installation, everythnig goes fine untill the first try for boot of the system, when the blue lines loads, loads, and stop on about 80%.I was told by specialist that the reason fot this is that the hardware check is failing and that this is why the system can not load. He disabled my sound card so to Fedora not to check for it (I don't know how) and installed Fedora 13. Now I am using it. And I am using an external sound card as well and I have sound working.
But now I want to instakll Fedora 14. And i tried and the same happened again!!! After installation, the blue bars loads, alods, untill abou t 80% and then stop!Please, tell me what to do! I have no connecion to the specialist now but I want to get Fedora 14 nstalled, and working with sound. This is the problem - that I have only external sound card
I tried upgrade with dvd media and preupgrade from F12 but in both cases there is anaconda exception. I have dual boot windows xp (/dev/sda1) and F12 (/dev/sda2).
sudo fdisk -l /dev/sda:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xa070b627
[Code]...
I currently run windows 7, I am interested in dual booting, upon burning the .iso to the disc using imgburn, I had a few problems with the installer when I ran the live disc, I'll assume it was personal causes, I googled several things for a simple solution, I went with using the Disk Manager in Windows 7 to shrink my current partition which I only have one which is running Win 7 on 140 GB's, using the shrink function in windows I unallocated 20 GB of that partition, I used this option because the option in F11's installer would not work at all. I rebooted from disc, loading the distro, and run the installer via desktop choose the use free space option and I got an error crash when it tries to execute this option which isnt the only time I got this error bug causing me to exit the installer, I copied the debug information in the details, I hope this is something simple because F11 isn't worth this much time.
Code:
01:08:53 DEBUG : DeviceTree.handleUdevDeviceFormat: name: sda1 ;
01:08:55 DEBUG : NTFS.supported: supported: False ;
01:08:55 DEBUG : PartitionDevice._setFormat: sda1 ;
01:08:55 DEBUG : PartitionDevice._setFormat: sda1 ; current: None ; type: ntfs ;
01:08:55 DEBUG : DeviceTree.addUdevDevice: name: sda2 ;
[Code]...
I was running preupgrade and while it was downloading packages the system was suspended and then shut off. When I brought it back up and tried to run preupgrade again it would not finish the download it just said 'Download complete. Reboot.' So I did bit nothing happened. I tried running it again but still nothing.
I then ran 'yum clean all' and then tried preupgrade again and then it tried to download again but once it goes to the download part it just says its done and says to reboot.
i was about to install fedora i had checked first and then when i reenter the disk to install it on hdd it shows me gnome bug error and some kind of crash but the desktop was ready with 2 bug it says gnome crash and other i didnt remember ..so what you say , should i install using that cd or i have to recreate a cd with fedora 14.i m using win7 already i wanna dualboot
View 6 Replies View RelatedJust downloaded the x86_64 iso, copied it to my USB stick and added a grub4dos entry for direct booting.
Code:
title Fedora 15 x86_64
find --set-root /linux/fedora64.iso
map /linux/fedora64.iso (hd32)
map --hook
chainloader (hd32)
[Code].....
While it does mention nouveau, and I do use Nvidia graphics (PCIe GT 240) I believe the cause may be something else. Googling around leads me to a couple of forum threads that seem to relate to the core series of Intel processors, but I'm at a loss. I've also searched this forum however the search seems to either bring up every result under the sun and non seem to apply or no results at all. I know the card's supported as Ubuntu works flawlessly. I also tried booting in safe graphics mode, however the exact same thing happens.
I doubt using a USB stick in this manor would cause this problem, but if you suggest it i'll install from physical media.
I would post logs, however the shell it drops to seems to be severly limited (lacking reboot, even).
I open up add printer gui and click plus button to add a printer and Fedora reports a crash. Any ideas on adding a printer FC15
View 5 Replies View RelatedI have a Biostar TA785GE which as I understand it, has a Realtek 8111DL on-board.
Booting with F11 32-bit DVD, and the F12 Live CD crashes before any user input, with indecipherable text on-screen (text mode, not X11).
Symptoms were the same with the Fedora 11 32-bit installation DVD, the Fedora 12 Live 32-bit CD and the CentOS 64-bit install DVD.
Booting with "linux text" mode (w/CentOS DVD) shows a kernel panic in ":r8169:rtl8169_init_one+0x369/0x9d4" from "pci_device_probe+0x100/0x180". I'll have to shutdown again to try the Fedora CD/DVDs, but if there's a different panic I'll post that tomorrow.
Disabling the on-board NIC allowed the boot to proceed, and get as far as detecting the hard drive partitions (where I stopped it since Ubuntu is installed).
Ubuntu 9.04 Workstation(Desktop?) install DVD worked fine, and I've installed it and am using it to enter this.
From Ubuntu 9.04 on this hardware: "uname -r" shows
Code:
Code:
Code:
Code:
So, my question: if I disable the NIC and install (alongside Ubuntu), will I be able to get the 8111DL working with a Fedora kernel?
I run ubuntu, 2 partion, one primary for / , one for /home and ofc swap.When I run the Livecd, at the partition step I do:
-Custom
-Select my / partition to install
-When I select next I get the error "blah blah, must be probably a bug...." and system crashes.
After system crach I can't boot into Ubuntu or anything, it gets me on the "error 11 ( think is 11 ) grub> " screen.Also, I think its something with my nouveau drivers, I think i get an error when boots the LiveCD something like "fudc...". It happens really fast and I can't read it properly.I did this procedure twice to write the errors, but it happens too fast to check them out. Also, is there a way to prepare the system before installing the Fedora, to avoid these errors?
I trying install fedora 12 in text mode, but every time the system crash, i cant install in text mode. Someone have one solution ?
View 1 Replies View RelatedI'm running Fedora 15 with current updates and kernel. I do not have anything special or non-standard about my configuration or setup. I use grsync to sync my home folder files to a remote rsync server on my network. I've checked my hard drives and my memory and everything else I can think. Here is the problem:
grsync will run for some time and once it nears completion it will crash. This, however, is no standard crash. It literally shuts my computer "OFF". I have shared the remote rsync folder through CIFS as well and I can copy those exact same files through nautilus with drag and drop without issue. I have had a few occasions where the rsync process will complete without issue, but this is a rare occasion. Since it powers my computer completely off I do not enjoy the luxury of having any log files or messages to attempt to diagnose from.
Last week my server crashed. I'm trying to diagnose the cause.
This is the relevant error message in /var/log/messages:
Code:
I'm assuming that I can conclude, then, that apache/httpd was the cause of the memory leak?
Next, I've been tracking my memory usage. Using top, this is an average memory load level for my server:
Code:
I'd like to confirm if my understanding of this data is correct, because Plesk indicates that my memory usage is only 50% or less. (Though I have read a number of reports indicating that Plesk's measurements are frequently wrong.)
Top says: Of the 2,073,156K total memory, 1,982,572K (95.63%) is being used, 90,584K (4.37%) is free. Of that sum, 421,948K (20.35%) are being used as buffers. Additionally, of the 2,096,472K of Swap, 60K is used, and 887,700K (42.34%) is cached.
My questions: Is my memory actually being 95% used? Or is the buffered quantity (20.35%) not a use of physical/virtual memory? (i.e. is it disk usage?) Does the amount of cached Swap influence the percentage of physical/virtual memory being used?
In other words, who is correct? Plesk says I'm using 40-50% of my memory, whereas top says 85-95%.
Is it possible to like have SMS sent to your cellphone when the server crashes or a process on the server dies?
View 4 Replies View RelatedJust wanted to share this with anyone wanting to know.If your headless server crashes, GRUB2 (at least on Ubuntu Server) is designed to force the GRUB menu to load up next time it starts up, which means you are locked out of SSH until someone physically makes a kernel selection on the PC.To prevent this do the following change to your grub.cfg file.#nano /boot/grub/grub.cfg
I was looking for a solution for this for a long time and found no hel with google. Let me know if there is a better way.I aware this file will get overwritten and need reediting if the Kernel gets updated.
my mysql is hogging my server resources andd sometimes crash it.Is there a way to increase memory it uses?I get this message alot..
Time: Mon Dec 6 08:21:33 2010 -0600
Account: mysql
Resource: Virtual Memory Size
[code]....
I hope the server forum is the best match for my post, otherwise please redirect me.
I have a Fedora 12 Desktop machine running at a remote site and have no keyboard not a screen connected to it. After rebooting it remotely I was surprised to learn the machine did not come back up again. (It did when I tested it while I was on site).
[Code]...
"system crash" means that:(1)I can ping it , but can not connect to it (via ssh or http or anything else)(2)the major role of that machine is to run a web application written in java, every 3 weeks(almost that), the users inform us and say they can log in that web application , and we find the situation just like (1) says.When this happen , we can only restart the machine by pushing the power button.(It's sad !)I've try to read all the log files located in /var/log but find nothing interesting.
View 5 Replies View RelatedI see vmcore files in /var/crash directory.is it ok to delete the contents of /var/crash directory ?
View 1 Replies View RelatedI was clean installing Ubuntu 10.04, and for some reason my machine crashed during the final stages (has been a bit unstable recently), when running the init scripts I think. As a result I think that some programs are not being run properly. For example, cups is never running - I have to start it to use printers. And CDs dont mount automatically. Here are the services states:
Quote:
~ > service --status-all
[ ? ] acpi-support
[ ? ] acpid
[ ? ] alsa-mixer-save
[Code]...
What can I run to clean this up and get things to how they should be? Dont suggest re-installing - I have no time for that and it might crash at the same point.
I use ubuntu lucid lynx, LAMP (mysql 5.1 and last php) and tried to install the package from mysql web page (mysql-connector-odbc-5.1.7-linux-glibc2.3-x86-32bit.tar.gz) through alien. Terminal output is as follows:p { margin-bottom: 0.21cm; }
sudo alien -d -c -k -i mysql-connector-odbc-5.1.7-linux-glibc2.3-x86-32bit.tar
dpkg --no-force-overwrite -i mysql-connector-odbc_5.1.7-1_all.deb
(Lendo banco de dados ... 147517 arquivos e diretios atualmente instalados).
[code]....
About once a day, my system seems to hang (mouse can't be moved, no keyboard input possible, screen stays unchanged)
After a restart I can find an error in /var/log/kdm.log:
Code:
X.Org X Server 1.9.3
Release Date: 2010-12-13
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code].....
This is Plesk linux server.I am using CentOS release 5.5 (Final) OS. Server seem to crash every couple of hours. Perhaps apache has memory leak?
Sep 28 07:06:29 wed kernel: Call Trace:
Sep 28 07:06:29 wed kernel: [] out_of_memory+0x8e/0x2f5
Sep 28 07:06:29 wed kernel: [] __alloc_pages+0x245/0x2ce
Sep 28 07:06:29 wed kernel: [] __do_page_cache_readahead+0x95/0x1d9
Sep 28 07:06:29 wed kernel: [] __wait_on_bit_lock+0x5b/0x66
[Code]....
Code:
[Sun May 22 04:02:06 2011] [notice] SIGHUP received. Attempting to restart
(98) Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
Above message is from /etc/httpd/logs/error_log.1. Saturday morning I reinstall my server. After finish, no error. I can access my HTTP server. Monday morning it has crashed. I don't know what is the meaning about this message.
Aprox. 1 time per day / every two days hangs the x-server. It hangs a few secs then is being killed and restarted. A popup window in the task bar tells me the restart of the x-server. After that about 15 sec. I can continue to work but sometimes the gtk2 apps lose their integrity thus I have to restart by logging off and in again.
Code: Select all Nov 3 09:25:30 PC2 org.kde.kuiserver[1070]: kuiserver: Fatal IO error: client killed
Nov 3 09:25:30 PC2 org.a11y.Bus[1070]: g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
what does it mean "Remote peer vanished with error" ? Remote access? I am not competent to evaluate that.
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u5 (2015-10-09)
deamon.log
[URL] ....
sys.log
[URL] ....
auth.log
[URL] ....
user.log
[URL] ....
dmesg
[URL] ....
I think I've totally destroyed my Suse install, but I have no idea what happened.
I was running Yast's "Create a backup" utility and my screen totally went black and kicked me to the login screen. I was unable to log in, except to a terminal.
So, then I tried to restart X (by typing startx) and I get "Fatal server error: Server is already active for display 0"
I've tried running the repair utility, and it doesn't work. Through a number of commands, I was able to start up a second X session, but that wasn't really much help.
I have been having problems with Xserver crashes (goes into low graphics mode). On inspection of my .xsession-errors file, I get X IO fatal errors 5, 11 and/or 104. Somehow my computer is losing its connection with the xserver (connection reset by peer) What is causing this? Should I post a report to launchpad? This happened before and after a clean install and more often when I opened a full screen game (SDL or OpenGL) Here is my xsession errors after my last crash:
[Code]....
My server crashed last week and I'm trying to diagnose why. /var/log/messages contains the following error messages, which indicate that the server's memory peaked. I would like to discover what process caused the memory peak. Being that "httpd invoked oom-killer", can I conclude that httpd was the cause of the memory peak?
[code]....
My Debian Lenny server crashed today for some inexplicable reason, and now one of my machines refuses to mount NFS shares on bootup. Manual mounting works fine. It's just one machine; the others are still mounting normally.
View 2 Replies View Related