Well I downloaded Catalyst 10.12 for linux. Was trying to build packages for Fedora 14. But was unable to find Fedora entry in it. Wonder why it is not there?Here is my X
[Code]...
How am I suppose to install catalyst if they don't have the packages ready yet ? I am not so installing RHEL6 packages in Laughlin cause of kernel conflict. Or is it that Catalyst still not compatible with Kernel 2.6.35.x ?
I am running ubuntu 10.04 on an emac powerpc. I go to the update manager and click on 'Update to Ubuntu 10.10', and then it starts the update and everything goes well until step 2 which is setting new software channels. It displays the error message:
W: Failed to fetch httports.ubuntu.com/ubuntu-ports/dists/maverick/Release
Unable to find expected entry partner/binary-powerpc/Packages in Meta-index file (malformed Release file?)
,E:Some index files failed to download, they have been ignored, or old ones used instead.
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies View RelatedI played a bit with the upgrade configuration files, to solve a couple of problems I have with Ubuntu 10.04, now when the upgrade procedure starts I getQuote:Failed to fetch Release Unable to find expected entry multiversdeb/source/Sources in Meta-index file (malformed Release file?)Some index files failed to download, they have been ignored, or old ones used instead.
View 9 Replies View RelatedI'm trying to upgrade from 8.04 to 9.10 via 8.10 etc. When I run update manager, I get this:
W:Failed to fetch [URL] Unable to find expected entry universal/binary-i386/Packages in Meta-index file (malformed Release file?), E:Some index files failed to download, they have been ignored, or old ones used instead.
and then it closes. I've unselected all the third party packages and tried various servers, but no difference. I can wget the file, but when I look at it I see entries for "universe/binary-i386/Release", but nothing for "universal" .
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I occasionally see messages in my logwatch report then cannot find the actual log entry. Is there any way I can have logwatch give a clearer report?an example:
vsftpd:
Unknown Entries:
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=a-specific-user
[code]....
I am getting virtual-box repository download error as given below:
Code: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. Repository: deb http://download.virtualbox.org/virtualbox/debian marverick non-free
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
I just upgraded to 11.4 from 11.3 and cannot seem to get the FGLRX modules to load. Every I try to load the module, I get the following error: fglrx: no symbol version for module_layoutI read through this howto with no avail: SDB:ATI drivers - openSUSE else run into this problem with upgrading?
View 2 Replies View RelatedSo I was stupid and careless enough to buy system with ATI Radeon HD6850.I have Maverick installed (64 bit) and everything was fine yesterday, I did usual update and today I get text prompt.I tried everything I already learned and upgraded to Catalyst 11.2 too (built packages from downloader installer), but with no luck.I see that aticonfig is now recognizing my card, which is promissing, but I'm unable to get the system to work with fglrx anyway.
I've purged the fglrx and friends, removed /etc/X11/xorg.conf and now I'm running on vesa with lower resolution.But I'm quite pissed off for loosing my morning on fixing (or failing to fix) yet another problem with ATI.
Code:
$ uname -r
2.6.35-27-generic
$ less /var/log/apt/history.log[code]..............
i just know about this : Boot Info Script 0.55 dated February 15th, 2010
[Code]...
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
I uninstalled OpenOffice using Software Center and installed LibreOffice from the PPA using the instructions on this page:[url]
I can't find any way to launch it. Applications > Office used to have OpenOffice Writer in it. Now there are no menu items for LibreOffice any darn place.
I am writing a sample nasm program via terminal.It's a basic one ,it only demonstrates the usage of the zero and sign flags and print relevant message to the output. Here are the code:
Code:
SECTION .data; data section
errMsg:db "Error !",10
errLen:equ $-errMsg
zeroMsg: db "Zero flag",10
zeroLen: equ $-zeroMsg
[Code]....
I am using preupgrade to update Fedora 9 -> Fedora 12 following these steps: -
Code:
yum -y update
yum clean all
yum install preupgrade
preupgrade-cli
preupgrade-cli "<FEDORA VERSION>"
reboot
I successfully upgraded this box from Fedora 6 => Fedora 9 and I guess I got too confident when this worked without a hitch and went straight from Fedora 9 => Fedora 12. Everything works up until the very end of the upgrade process when I get this error.
Code:
(process:2227): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Parsing primary.xml error: Couldn't find end of Start Tag rpm:entry line 15303
[Code]...
I'm trying to add an entry to the gnome menu for every users of a FEDORA 14 system, both
Code:
xdg-desktop-menu install --novendor --mode system osean-programmer.desktop
and
Code:
desktop-file-install osean-programmer.deskto
[Code]....
How to add the application launcher to every user's Desktop during the RPM installation?
I'm at step 2c in the sticky "My wireless doesn't work - A primer." and yes, my HTC G1 phone isn't listed and your sticky says nothing more can be done. So, my question is how lsusb generates that list... Is it querying the device, extracts the information and prints that information to the display or is SuSE comparing whatever info is returned, matches that information (eg VendorID/ProductID) to a database of supported devices, then prints the result to display?
This is important, because if the former is true, then it looks like I may be SOL getting this to work in SuSE. If the latter is how things really work, then I assume that if I'm able to add an entry for my phone things can proceed.
Having just upgraded to Ubuntu 11.04 from 10.10 I noticed that my Grub menu had not upgraded. The upgrade was not as straight forward as it should have been as the PC hung at the end of the installation resulting in a reboot and running dpkg in safe mode to get it all back up and running.
To fix the incorrect grub menu.lst file which was not updating, I renamed the original file and then ran sudo update-grub. It generated a new and correct file. However, my Windows partition was not listed as a Grub menu option.
[Code]...
However i am unable to find the Run program. It was easy to find on the other Distro's i have tried but i have been unable to locate to in Fedora 12.
View 3 Replies View RelatedI am installing Avg on F14 it's looks like installing perfectly no eror appearing but unable to find avg at the end of the installation. What should I do now?
View 7 Replies View Relatedout in finding root device of fedora 14. I've windows XP and fedora 14 installed on. this is the output for blkid
/dev/sda1: UUID="962C8EA82C8E834B" TYPE="ntfs"
/dev/sda5: UUID="262C06BF2C068A4F" TYPE="ntfs"
/dev/sda6: UUID="cbcf539a-dee1-4f2f-b68c-ce315ae76e0f" TYPE="ext4"
[code]...
Step 1: Open TerminalStep 2: Run as root in Terminal
Code:
su -
And enter the root's password.
[code]....
I have a lenovo x200 laptop running Fedora 14, fully up to date with the Fedora repository. Seemingly out of nowhere, some websites will no longer load. First it happened to www.facebook.com, next (after a day or so) wikipedia.org, now the Fedora forum. Other Internet access seems fine, but when I try to go to these pages I just get "unable to find host" errors. Its totally bizarre. It first happened in an airport so I thought it was just a strange network there, but now it happens at home. I can't get on these sites in firefox or elinks browsers (in a terminal) BUT I can ping both sites no problem. Also, the other computers in this house have no problem visiting these sites.
View 2 Replies View RelatedHow can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.2
Deleting module version: 3.1.2
completely from the DKMS tree.
Done.
Creating symlink /var/lib/dkms/vboxdrv/3.1.2/source ->
/usr/src/vboxdrv-3.1.2
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at
/lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without:
Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
Code:
[root@nevada Downloads]# uname -r
2.6.31.6-166.fc12.x86_64
I have been running F13 since it came out, with the wireless working fine since I got it working (using the RPM Fusion repository, broadcom-wl-5.60.48.36-1.fc13). Since I updated software (without reading what was to be updated), yesterday, I am unable to even find wireless networks, although I am, as you can see, able to access through eth0 It is not a hardware problem, as I can not only find them, but access them on Ubuntu 9.10 live disc. Below is my lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[code].....
I've installed Fedora 15 with Fedora 14 already installed in other partitions, but now I can't boot Fedora 14 as it prompts "no root device found", these are both grub.confQuote:
#boot=/dev/sda
default=0
timeout=120
[code]...
For some reason I am unable to find a DHCP Server package for Fedora 14 using yum. Does anyone know what I should be searching for or even a .rpm that can be used?
View 2 Replies View RelatedI am unable to find other computers on my local network from my workstation.
Code:
nmap 192.168.0.*
shows me the workstation and the gateway(192.168.0.1)
My workstation has 2 interfaces: eth0 and eth1. both are checked in the "trusted interfaces" section of system-config-firewall. Network is currently connected to eth1. If I run the same nmap command from my laptop (also fedora), it outputs everything on the network but my workstation. The strange thing is that the workstation has functioning internet connection.
I've recently installed a Radeon HD 5770 graphics card, but it currently doesn't have support from any open source drivers (including MESA's experimental DRI drivers). The only other option would be ATI's Catalyst drivers, but 9.12 doesn't support Xorg 7.5 at the moment (the drivers disable Xorg; leaving a terminal only setup).
The question I've got is that is it possible to downgrade Xorg to 7.4 as a temp workaround and if so, how easy would it be to revert back to 7.5 afterwards.