I uninstalled OpenOffice using Software Center and installed LibreOffice from the PPA using the instructions on this page:[url]
I can't find any way to launch it. Applications > Office used to have OpenOffice Writer in it. Now there are no menu items for LibreOffice any darn place.
I've installed Clamav antivirus from synaptics but I can't find it on any menu now. How can I run it?
View 4 Replies View RelatedFrom my terminal : >> libreoffice -writer gives :
But if I run it from the menu (applications->office->libreoffice writer) or with sudo it works fine. so something's happening with the permissions, I goes, but I don't quite understand what's wrong. I've tried deleting .libreoffice but this doesn't help. I'm using libreoffice3.3.2 and Ubuntu 11.04.
I started using lubuntu and I gotta tell ya, this is running smoking hot on my system. Though, I was curious, what are the limits of this thing? Do any of yall use it? Noticing that Libreoffice isn't initially installed. Can it run that ok?
View 9 Replies View RelatedUpdate Mgr got me a bunch of updates today, including a kernel (2.6.31-20). I was doing something else, and when it prompted me to do something with menu.lst, I accidentally accepted the default, which I think was to keep menu.lst unchanged.
As a result, the new kernel was installed but not added to menu.lst, so I guess I can't boot to it.
Is there a way to tell my computer, "make the entries into menu.lst automatically"
I guess I could put the entries in manually, but as a beginner, I'm pretty scared to be messing with that file...perhaps if someone has a link to an exceptionally understandable explanation...
i just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
[code]...
i just installed ubuntu 9.10 netbook remix, i made a partition (sda6) for it, first i had only opensuse, and when i was installing ubuntu, i put the bootloader in (sda6) the Opensuse bootloader is installed on MBR,
Code:
fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xb02fb02f
[Code]...
I just finished an install with 4 OS's. DOS, XP, WIN7, and UBUNTU. They work fine no with problems. However, the menu entry to run memtest does not work, However on my other system it works. The failing system is an i7 and the working one is a Core Duo. Both have a lot of ram. The Ubuntu os was copied with GPARTED. So it is identical.The menu.lst was a copy/paste job and then the HDxx's modified as needed. Please take a look and tell me where I went wrong.menulst.txt
View 4 Replies View RelatedThere are times that I would like to open an app as root user without having to use the command line in order to do that. I learned of a nice app in the Fedora repos called beesu and I will show you how to set up a menu entry to be able to use this nice app.
From man beesu:
Code:
See man beesu for more information.
Beesu can be installed in Fedora with the following command:
Code:
IMPORTANT: Beesu must be installed in order to successfully complete this tutorial.
You can use beesu from the command line with the following example:
Code:
This will open gedit as root user after the correct root password has been entered into the password prompt. This is great. However, I'd like to open an app as root user without having to use the command line or alt+f2 run box. So, I wrote a small bash script that uses zenity to prompt the user for an app to open as well as the root password.
Copy the following code into a new text file and name it mybeesu.sh.
Code:
You need to change the /path/to bit in step 4 "Command" to reflect the path to which you saved the mybeesu.sh script. Click the OK button to save the new menu item.
Now, when you click the new menu item from the gnome menu, a zenity window will open asking which app you want to open. After that, a second window will open prompting you for the root password. If all goes well, and you entered the correct root password, your desired app should open as if you used su -c 'foo' to launch it.
I recently upgraded grub -> grub2 on my karmic box. Grub2 worked when chainloaded from legacy grub, and also the first time I tried it standalone. Both times the grub2 menu came up.
I ran vbeinfo at a grub2 command prompt, and found my monitor's native res listed - 1280x1024. I added that to my /etc/defaults/grub and then ran update-grub, and rebooted. This time no menu appeared and the default entry booted straight away. I suspected that the resolution was not supported for some reason or that the way I entered it in the config file was wrong, so I commented it out again in /etc/default/grub, and ran update-grub again - to no avail.
I have since tried lots of different formats for the GRUB_GFXMODE, such as 1280x1024@24, 1280x1024x24, and the normal 640x480, but none of them give me a grub menu. I have even tried using GRUB_TERMINAL=console, to no avail. I have checked the /boot/grub/grub.cfg file each time to make sure my changes were put there correctly by update-grub. I have also made sure that timeout was set to 10, and the hidden timeout was set to 0. My GRUB_CMDLINE_LINUX_DEFAULT="quiet".
I have reinstalled grub2, grub-pc, and grub-common, and I have dpkg-reconfigured them all too. I have no idea what to do to get my grub menu showing up again.
I've just installed FreeBSD 8.1 on /dev/sda4 (FreeBSD slice), without installing the boot loader from FreeBSD (I've selected None when prompted for boot loader in sysinstall). Now I want to use my existing Grub2 from already installed Ubuntu 10.10 to boot FreeBSD also.
After some reading, I've added to the end of /etc/grub.d/40_custom:
After running sudo update-grub, grup.cfg file shows my new entry. The problem is that after restart, I don't see the new entry in the grub menu.
Another question, If i used chainloader +1, that means I need to have the FreeBSD bootloader installed also on /dev/sda4 right? For chainloading booloaders?
I didn't get to that step, I first want to see the entry in the menu.
Any idea what I might be missing/misdoing? (I also checked for blank spaces in the menuentry like the wiki for grub2 says)
Having just upgraded to Ubuntu 11.04 from 10.10 I noticed that my Grub menu had not upgraded. The upgrade was not as straight forward as it should have been as the PC hung at the end of the installation resulting in a reboot and running dpkg in safe mode to get it all back up and running.
To fix the incorrect grub menu.lst file which was not updating, I renamed the original file and then ran sudo update-grub. It generated a new and correct file. However, my Windows partition was not listed as a Grub menu option.
[Code]...
I'm using Fedora 12 with Gnome and I have a slight problem with my places menu. I have entries in the list that I would like to remove, but cannot figure out how. I multiboot Fedora with Windows 7 and windows 98. My Places menus looks something like this:
Places
Code:
Home Folder
Desktop
Music .....
Now, if you notice there are 2 entries for both my 'Storage' and 'Windows 98' partitions. On of them will actually open up a window showing the contents of the partition, the other displays an error which basically says "Unable to mount, drive is already mounted". Right clicking on the entry has the same effect as left clicking, it just brings up the error message. They do not appear in the Bookmarks menu.
I'm trying to add an entry to the gnome menu for every users of a FEDORA 14 system, both
Code:
xdg-desktop-menu install --novendor --mode system osean-programmer.desktop
and
Code:
desktop-file-install osean-programmer.deskto
[Code]....
How to add the application launcher to every user's Desktop during the RPM installation?
I am running ubuntu 10.4 only .
I assume to make the boot menu appear I have to add an entry into 40_custom file. Not quiet sure how to make that entry, or if it has to be positioned a certain way.
I compiled QLWM window manager but it's not in GDM's session menu. How do i add it there?
View 1 Replies View RelatedIf i select Places -> Home Folder vlc starts and try to open the content of the selected folder.
Any idea which config file i should adjust to solve this behaviour?
I have openSUSE 11.4 KDE (64-bit). Very inexperienced Linux user. I just dragged Thunderbird's icon to the lower panel so that it can be launched quickly. But now when I go to Application Launcher -> Applications -> Internet -> E-mail, the Thunderbird entry is no longer visible.How do I bring it back?
View 3 Replies View Relatedwhat should be my menu.lst entry to the 3rd drive intended for fedora to boot. for now this is what i did but didn't work.
# Other bootable partition config begins
title Fedora (on /dev/sda3)
rootnoverify (hd0,2)
kernel (hd0,2) vmlinuz PMEDIA=idehd
initrd (hd0,2) initrd.gz
# Other bootable partition config ends
i just know about this : Boot Info Script 0.55 dated February 15th, 2010
[Code]...
I installed the Global Menu Bar applet for my top panel, thus removing the menu bar from most, if not, all of my apps on Ubuntu. I removed the applet, mainly because of how God-Awful and inconvenient it was. Now, I don't have any menu bars on my apps!
View 3 Replies View RelatedHow can I add a menu entry when I right click my mouse system wide?
View 2 Replies View RelatedOk, first is it possible to take a program I wrote and make it to be a entry in the right menu of a file browser program.
Also, can this happen if the program is developed in Java?
OpenSuSE 11.4
Kde 4
Dolphin(file browser)
I have just installed KDE3.5.10 on S13.1 and have followed all steps required on the site at 'http://slackware.osuosl.org/unsupported/kde-3.5.10-for-slack13.0/' containing the packages, finishing with:
[code]...
You'll probably need to log out and back in again for the profile scripts to add the KDE3 stuff to your $PATH and $XDG_CONFIG_DIRS. When you log back in, KDE3 should start when you run X. Unlike LXDE, this install didn't automatically create a menu entry for gdm. Everything seems to be right, but I can't get the gdm entries I've tried to work. Could somebody who has also installed 3.5.10 kindly post the correct file contents?
I installed "Gphoto" through "Synaptic Package Manager" twice and I can't find it anywhere under "Applications" drop down menu..
View 7 Replies View RelatedI've recently installed suse x64 kde in dual boot mode with windows. I have 2 primary partitions with ntfs with 1 for windows7 boot and other for data/storage. There is no boot provision for data partition. SUSE install is on extended partition. I am unable to run fdisk -l and boot info script for some reason, kde is freaking me out (used to use gnome for last 4 years). The GRUB shows data as a boot and it added an entry in its menu. I will like to remove that entry from menu list.
View 9 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
I am running ubuntu 10.04 on an emac powerpc. I go to the update manager and click on 'Update to Ubuntu 10.10', and then it starts the update and everything goes well until step 2 which is setting new software channels. It displays the error message:
W: Failed to fetch httports.ubuntu.com/ubuntu-ports/dists/maverick/Release
Unable to find expected entry partner/binary-powerpc/Packages in Meta-index file (malformed Release file?)
,E:Some index files failed to download, they have been ignored, or old ones used instead.
I have just installed Debian and the installation went smooth (net installation). The last prompt was to specify if you want to be able to boot 3 different OS's using grub. I answered yes (I have Win7, Ubuntu and now wanted to install Debian for testing purposes). Is there any way I could manually add entry to grub for booting Debian, for instance from Ubuntu adding to menu.lst?
View 2 Replies View Relatedi found a tutorial to auto-mount ntfs drivers at kubuntu start
[URL]
but i can't find the K menu > System Settings > Advanced Tab > Disk & File Systems menu.it disappeared in kubuntu 9.10?