I am writing a sample nasm program via terminal.It's a basic one ,it only demonstrates the usage of the zero and sign flags and print relevant message to the output. Here are the code:
Code:
SECTION .data; data section
errMsg:db "Error !",10
errLen:equ $-errMsg
zeroMsg: db "Zero flag",10
zeroLen: equ $-zeroMsg
[Code]....
I've having problems with my Makefile.
I'm trying to create a program from 2 files - main.cpp that contains the main function, and modules.c that contains the definitions of the functions that are called in main(). modules.c only contain function definitions, no main function.
My Makefile is as follows:
Code:
I have included "modules.h", which contains all the function declarations, in my main.cpp.
When I try to make using this Makefile, I get the error
Code:
If I switch the order of modules.o and main.o in my $(TARGET) line, then I get errors that say "undefined reference to" the functions I have defined in modules.c, in main.cpp.
Downloaded the stable kernel 2.6.36.4 from kernel.org/ (Current Kernel:2.6.18-92.el5) However i have extracted the source code .ran make mrproper copied the old configuration file and selected it by using make menuconfig .However after selecting it and clicking ok i m getting following error.
Code: .
config:656:warning: symbol value 'm' invalid for IP_DCCP_CCID3
.config:657:warning: symbol value 'm' invalid for IP_DCCP_TFRC_LIB
#config:1353:warning: symbol value 'm' invalid for FIXED_PHY
# configuration written to .config 'm' invalid for IWL4965
[code]....
If in Software Sources I have "Download from" set to "Server for Australia", then when I run sudo apt-get update, I get a warning at the end
Code:
Reading package lists... Done
W: Duplicate sources.list entry http://dl.google.com stable/main Packages
[code]....
I have been constantly getting the red "Warning Symbol" that tells me that my "Update information is outdated."Of course I luse Update Manager and "Sudo Apt-get update/upgrade" in Terminal, but this appears after a bit, everytime I reboot. Could this be related to the GetDeb archives being offline (If so, then someone needs to get this fixed; an offline repo is not worthy of a "DANGER WARNING ATTENTION" symbol!
View 5 Replies View RelatedApache doesn't start with libedit.so.0.0.34 ( from libedit0-3.0.snap20090923-4.1.x86_64 ).
Code:
[Tue Dec 15 16:20:51 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
PHP Warning: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
/usr/sbin/httpd2-prefork: symbol lookup error: /usr/lib64/libedit.so.0: undefined symbol: tgetent
Solution: I copied /usr/lib64/libedit.so.0.0.27 from a previous install and symlinked /usr/lib64/libedit.so.0 to it.
ive made a slight mistake on my Ubuntu 9.10 64bit. I was trying to get Voodoo Motion Tracking software to work, and it was having trouble locating some Qt Libs, so I decided it was a good idea to move its included libs into /user/lib32 directory. Voodoo now works, but Skype instead comes up with:
Code:
skype: symbol lookup error: /usr/lib32/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv Skype was installed using their own provided 64bit .deb - it was previously working fine.
The most recent update impacted my thunderbird-3.0. When launched I get these error messages
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: Symbol `SSL_ImplementedCiphers' has different size in shared object, consider re-linking
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so.1d: undefined symbol: PL_ClearArenaPool
I can only assume the libnssutil3 library was upgraded and this broke the library call in the thunderbird-3.0.
I performed a yum update and now my yum is not working and I am unable to start my apache processes (in a dmz configuration).This is the error I am getting from yum.
yum clean
Traceback (most recent call last):
File "/usr/bin/yum", line 4, in ?
import yum
[code]....
I'm running Ubuntu 10.10 and was looking for software to mix mp3's. I want to try mixxx (found here) I installed the most recent package by using the ppa of the project (as described here) Install seems to be ok (no error messages)But when I try to run mixxx from the menu nothing happens. Nothing. Running it from the terminal with the command
Code:
mixxx
I get this error message:
Quote:
mixxx: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
i just know about this : Boot Info Script 0.55 dated February 15th, 2010
[Code]...
Well I downloaded Catalyst 10.12 for linux. Was trying to build packages for Fedora 14. But was unable to find Fedora entry in it. Wonder why it is not there?Here is my X
[Code]...
How am I suppose to install catalyst if they don't have the packages ready yet ? I am not so installing RHEL6 packages in Laughlin cause of kernel conflict. Or is it that Catalyst still not compatible with Kernel 2.6.35.x ?
I am trying to replacee all digits with a symbol (say, big U here) in a string by
[code]...
The result become 'UsUoUmUeUtUhUiUnUgU' instead of 'somethingUUU' as expected. Looks like my string contains some 'hidden digits' in between the letters. Does anyone have an idea about that?
I am working on research using a USB wireless card (WUSB600N) which works by a driver from Ralink (rt3572). In order to achieve my task, I am trying to modify that driver. One of the ways, I tried to call a function written in different module from that which I am working in. Every thing went fine (make & make install) until the modprobe command when i got (Unknown Symbol) about that function. I tried many ways to solve that problem like; Export_Symbol, and function pointers but, with no results!
View 1 Replies View RelatedI uninstalled OpenOffice using Software Center and installed LibreOffice from the PPA using the instructions on this page:[url]
I can't find any way to launch it. Applications > Office used to have OpenOffice Writer in it. Now there are no menu items for LibreOffice any darn place.
I am running ubuntu 10.04 on an emac powerpc. I go to the update manager and click on 'Update to Ubuntu 10.10', and then it starts the update and everything goes well until step 2 which is setting new software channels. It displays the error message:
W: Failed to fetch httports.ubuntu.com/ubuntu-ports/dists/maverick/Release
Unable to find expected entry partner/binary-powerpc/Packages in Meta-index file (malformed Release file?)
,E:Some index files failed to download, they have been ignored, or old ones used instead.
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I occasionally see messages in my logwatch report then cannot find the actual log entry. Is there any way I can have logwatch give a clearer report?an example:
vsftpd:
Unknown Entries:
authentication failure; logname= uid=0 euid=0 tty=ftp ruser=a-specific-user
[code]....
I am using preupgrade to update Fedora 9 -> Fedora 12 following these steps: -
Code:
yum -y update
yum clean all
yum install preupgrade
preupgrade-cli
preupgrade-cli "<FEDORA VERSION>"
reboot
I successfully upgraded this box from Fedora 6 => Fedora 9 and I guess I got too confident when this worked without a hitch and went straight from Fedora 9 => Fedora 12. Everything works up until the very end of the upgrade process when I get this error.
Code:
(process:2227): GLib-WARNING **: GError set over the top of a previous GError or uninitialized memory. This indicates a bug in someone's code. You must ensure an error is NULL before it's set. The overwriting error message was: Parsing primary.xml error: Couldn't find end of Start Tag rpm:entry line 15303
[Code]...
I mount two ntfs partitions under my Slackware/win/C/win/Dwhen i process a search via "find" it give me the following when reach /win directoryfind: warning: not following the symbolic link '/win/C/Document and settings'i wantto know what is going on and the solution
View 2 Replies View RelatedPreviously after doing aptitude upgrade, my pidgin seems broken with no gui shown. So I decided to download the latest source from pidgin website and build it from source, but I think I made situation worse because it then complained that ssl lib was needed. Then I removed the libpurple (e.g. aptitude purge libpurple0 libpurple-bin libpurple-dev) and reinstalled pidgin (aptitude install pidgin). Now it shows the error
pidgin: symbol lookup error: pidgin: undefined symbol: purple_media_element_info_get_type
I searched on the internet and can not find a solution. The clues on the internet says that's because the piding I use is the older version of libpurple. But I think I've removed all with purge and reinstalled it. Maybe some legacy binary is referenced. What or where it might be? Or where there may contain related information.
I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
I'm trying to make a program to simulate a parabolic movement, so i've added 2 entries, one for the initial velocity and other for the angle, anyway you probably don't care about that xD what i want is to take the number entered in the entry and put it in a variable to do the math, and then show everything in a dialog or something. how do i do that?
View 3 Replies View RelatedWhen I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies View RelatedI have to add a new interrupt framework to the kernel (INT 81h). To add the interface descriptor to INT 81h I have to write to the IDT entry 81h. There are some functions of the kernel that can do this task but they can not be used in a module. So I will now do a patch to the kernel and don't know where to start.
Where is INT 80h interface descriptor written to the IDT? - So I could write it maybe the same way in the same function. Which GTD entry is used to write to the IDT (1, 2, 3 or ...) ? - So I can do some debugging.
I created a class which has to return an array. My problem is I need to return 3 entries per record for example:
Code:
array(
"2009-06-13", "John", "Doe";
"2009-06-13", "Paul", "Simon";
"2009-06-12", "Frank", "Herbert";
);
Can this be done? What is the syntax? Where is the documentation? If this can't be done, How would you return this to a class without using a DB?
I have a kernel module program which is used to create a entry in the proc file system. I have to read and write values in the entry. Its taken from a online tutorial stuff.how to write the value to the proc entry in the program ?
View 1 Replies View RelatedI've searched the web for quite a while and cannot seem to find a way to add a gtk.Entry() to a toolbar via toolbar.insert().
I currently have this:
Code:
Which in turn spits out "Gtk.Toolbar.insert() argument 1 must be gtk.ToolItem, not gtk.Entry"
How would I do this correctly?
I need to create and access a very large number of directories (and by large I mean millions). Each directory's name consists only of numbers, which are incremented every time a new directory is created (so there will be directory 1, 2, and so on).Of course I could just dump all these directories under the same parent directory, but I reckon I would run into filesystem limits. Moreover, I presume that entry lookup is not a O(1) operation, which means that lookup does not scale well.
One solution is to use some sort of prefix tree for storing the data. In this scheme, the data for directory "1234" would actually be stored in "/1/2/3/4".This solution has the advantage that each subtree never has more than 10 entries, but the disadvantage of requiring as many individual lookups as the length of the path.There are also intermediate solutions: using a maximum of 100 entries per directory, "1234" would become "/12/34", per example.In order to choose the best scheme, I must know more about the scalability of directory lookup under Linux. What's the maximum reasonable number of entries for a directory before lookup becomes too slow? Does someone know exactly what are the limitations of the algorithm used for directory lookup?
i want to make program that processing entry in log on real time... I have try to pass "tail -f -n 1 /var/log/messages" command from .runtime().exec and process the output,, description of the algo is like this
-passed to exec()
-read output
-if not same as previous value procces it
but sometimes it loose some entry to procces, maybe it occur when proccesing another entry is added by system...